Top Wing Nut Assortment

48PCS Toggle Bolt and Wing Nut Set Camtek Toggle Bolt Zinc Plated Steel Phillips Round Head Toggle Bolt and Wing Nut Assortment Kit for Hanging Heavy Items on Drywall -3 Sizes 1/8 3/16 1/4

  • ✈【HIigh Quality】- Camtek toggle bolt and wing nut are made of zinc plated carbon steel, rust resistance, corrosion resistance and durable enough for you to hanging items..
  • ✈【Unique Design】- Built in spring line, the spring can be automatically opened behind the hollow substrate to form a large radius and large area contact, providing a reliable anchoring effect..
  • ✈【What You Get】- 48pcs toggle bolt and wing nut assortment kit with 3 sizes in a storage box, easy to store and carry, it includes: 20pcs 1/8inch, 16pcs 3/16inch and 12pcs 1/4inch. Different sizes can meet your different needs. Note: The size of the bolts are all the same, all are 2.95inch..
  • ✈【Wide Applications】- It can be used for hollow brick, gypsum board, cement fiberboard, wood board and other hollow substrates. Perfect for hanging curtain rods, towel bar, lamps, photo frames, shelf, flower pots, coat racks, projector, etc., suitable for lighter loads..
  • ✈【Easy To Install】- Firstly, drill a hole (big enough to thread through collapsed spring-loaded wings) and then fold the two wings through the hole, the wings would release and clamp on the inside. Finally, screw the bolts..
Check Stock

24PCS Toggle Bolt and Wing Nut Set, Camtek Toggle Bolt Zinc Plated Steel Phillips Round Head Toggle Bolt and Wing Nut Assortment Kit for Hanging Heavy Items on Drywall -3 Sizes(1/8'', 3/16'', 1/4'')

  • ✈【HIigh Quality】- Camtek toggle bolt and wing nut are made of zinc plated carbon steel, rust resistance, corrosion resistance and durable enough for you to hanging items..
  • ✈【Unique Design】- Built in spring line, the spring can be automatically opened behind the hollow substrate to form a large radius and large area contact, providing a reliable anchoring effect..
  • ✈【What You Get】- 24pcs toggle bolt and wing nut assortment kit with 3 sizes in a storage box, easy to store and carry, it includes: 10pcs 1/8inch, 8pcs 3/16inch and 6pcs 1/4inch. Different sizes can meet your different needs. Note: The size of the bolts are all the same, all are 2.95inch..
  • ✈【Wide Applications】- It can be used for hollow brick, gypsum board, cement fiberboard, wood board and other hollow substrates. Perfect for hanging curtain rods, towel bar, lamps, photo frames, shelf, flower pots, coat racks, projector, etc., suitable for lighter loads..
  • ✈【Easy To Install】- Firstly, drill a hole (big enough to thread through collapsed spring-loaded wings) and then fold the two wings through the hole, the wings would release and clamp on the inside. Finally, screw the bolts..
Check Stock

KURUI Heavy Duty Hollow Wall Anchors for Drywall 24Pc Toggle Bolts and Wing Nut Kit Hollow Drywall Anchors and Screws Assortment Set 3 Sizes Butterfly Anchors 1/8in 3/16in 1/4in

  • ...HANGING TASKS – The drywall anchors are designed with spreading butterfly wing nuts, when knocked in hollow walls the wings will automatically spread to increase the area of the thrust surface, which enhances the load bearing of the toggle bolts for heavy-duty hanging tasks..
  • WIDELY APPLICABLE – Our toggle bolts assortment kit with multiple size options allows you to easily hang items such as television, painting, mirror, shelves, pictures onto hollow walls safely and with ease..
  • WHAT YOU GET – The package includes 12pcs 1/8in toggle bolts and nuts set, 6pcs 3/16in drywall anchors and nuts set, 4pcs 1/4in heavy-duty wall anchors, all the piece are well packaged in a beautiful clear plastic box. If you have any question about this toggle bolts and nuts assortment kit, please feel free to contact us!.
Check Stock

WREOW Wing Nut Driver Set 1/4\ Hex Shank Slot Wingnut Drill Bit Socket Wrenches Tools Set for Panel Nuts,Screws Eye C Hook Bolt and Q-Hanger (3 PACK)

  • This compact wing nut driver is made from CR-V steel, highly strong and sturdy..
  • These wing nut driver sets are designed to tighten or loosen wing nuts, bolts, hooks quickly and effectively when installing hurricane shutters/panels or doing other projects, and saves lots of your time and get your job done more faster..
  • Just pop it into a power screwdriver and get the wingnut / shutters installed without concerning about spraining your thumbs by using other hardware tools, saves wears and tears on your fingers..
  • Quickly to tighten and simply turn the wing nut by power drill. Works on any wing nuts bolt or C head Eye hook screw up to 5x faster than you can by hand..
  • The total length of the tool is about 6.55cm(2.6 inch).
  • the outer diameter of the socket is about 17.8mm(0.7 inch).
  • and the slot cutout is 4mm(0.157 inch) wide..
Check Stock

PANOVO (2pc) Power Wing Nut Driver Set,Slot Wing nuts Drill Bit Socket Wrenches Tools Set,1/4\ Hex Shank Drills Bits for Panel Nuts screws eye hook bolt

  • 2pcs in a package - This drills nut driver bit designed to tighten or loosen wing nuts, bolts, hooks quickly and effectively when installing shutters/panels or doing other projects, and saves lots of your time and get your job done more faster..
  • quickly to tighten simply turn the wing nut by power drill. your Impact Driver or Drill you drive just about any wing nuts bolt or head Eye hook screw up to 5x faster than you can by hand..
  • Just pop it into a power screwdriver and get the wingnut / shutters installed without concern about spraining your thumbs by using other hardware tools, saves wears and tears on your fingers..
  • This wing nut driver is a perfect tool that works with any power drill (1/4 inch hex shank). The total length of the tool is about 6.55cm(2.6 inch).
  • the outer diameter of the socket is about 17.8mm(0.7 inch).
  • and the slots on the drill bit tool is 4mm(1.55 inch) wide..
  • Wing Nuts Driver Set A must have tools for Snowstorm protection for windows doors hardware.
Check Stock

Goldblatt Drywall Sanding Block Hand Sander with Handle Sandpaper Holder Tool for Wood Drywall Metal Auto Body Polishing

  • PLATE SIZE & MATERIAL - Measures 9.5-inch x 3.1-inch. Made of hard aluminum, features with heavy duty foam for sanding cushion. Reinforced tempered....
  • COMFORTABLE HANDLE - PP+TPR, cushioned rubber soft grip reduces fatigue and provides no-slip grip, easy for one-handed operation.
  • WING NUT DESIGN - Screw clamp design holds abrasive sheets firmly. Fits half sheet of standard sandpaper or use with die-cut.
  • HOW TO CHANGE THE SANDPAPER - Step 1: Unscrew the wing nut, open the clip. Step 2: Insert sanding sheet under clip and screw the wing nut. Step 3:....
  • WIDE APPLICATION - For use with die-cut or a half sheet of standard sandpaper. Great for drywall sanding, flat surface of wood, metal, automotive,....
Check Stock

Pagow Deep Power Wing Nut Driver Set- Slot Wing Nuts Drill Bit Socket Wrenches Tools Set Hex Grooved Socket for Panel Nuts Screws Eye C Hook Bolt Q Hanger 1/4 Hex Shank 2

  • Size: this steel wing nut driver is a perfect tool that works with any power drill (1/4 inch hex shank). The total length of the tool is about....
  • This drills nut driver bit designed to tighten or loosen wing nuts, bolts, hooks quickly and effectively when installing hurri shutters/panels or....
  • Just pop it into a power screwdriver and get the wingnut / shutters installed without concern about spraining your thumbs by using other hardware....
  • Quickly to tighten simply turn the wing nut by power drill. your Impact Driver or Drill you drive just about any wing nuts bolt or C head Eye hook....
  • This nuts tools A must have for hurricane Snowstorm prone areas.
Check Stock

2 pcs Power Wing Nut Driver,Wing Nut Drill Bit Socket Wrenches Tool 1/4 Inch Hex Shank for Panel Nuts Screws Eye C Hook Bolt 1PCS

  • This steel wing nut driver is a perfect tool that works with any power drill (1/4 inch hex shank).
  • The total length of the tool is 6.55cm(2.6 inch).
  • the outer diameter of the socket is 17.8mm(0.7 inch).
  • and the slot cutout is 4mm(0.157 inch) wide.
  • Designed to tighten or loosen wing nuts, bolts, hooks quickly and effectively when installing hurricane shutters/panels or doing other projects, and....
  • Just pop it into a power screw driver and get the wings nut / shutters installed without concern about spraining your thumbs by using other hardware....
Check Stock

Quickie 24-Ounce Heavy-Duty Wet Mop

  • 56-inch commercial grade hardwood handle.
  • 56-Inch commerical grade hardwood handle.
Check Stock

Gibraltar Suspended Cymbal Arm with Grabber Clamp (SC-SCGA)

  • Wing-Nut Tilter, used for mount on bass drum..
Check Stock

The Hillman Group 59445 5/16-18 - Nylon Wing Nut 8-Pack

  • This Nut Has A Wing On Each Side That Helps You To Tighten The Nut Without Tools.
  • Wing Nuts Can Be Used Where Frequent Fastener Connection Adjustments Or Removals Are Needed And Can Be Made Quickly And Often.
Check Stock

The Hillman Group 2570 10-24 Wing Nut Nylon 10-Pack

  • This Nut Has A Wing On Each Side That Helps You To Tighten The Nut Without Tools.
  • Wing Nuts Can Be Used Where Frequent Fastener Connection Adjustments Or Removals Are Needed And Can Be Made Quickly And Often.
Check Stock