Top Wire Mounting Bracket

12V Magnetic Towing Trailer Light Kit Amber/Red

  • Multi-functions Each light has 11 high quality LED outputs high brightness and low brightness Can functions perfectly as parking light stop light turn signal light tail light and brake light.
  • Highly Sealed & durable The front Polycarbonate lens is sonically welded to the housing and the back wire lead is add on glue to make sure the light is completely sealed Waterproof enough to withstand all weather abuse.
  • Easy Wire Connection For wire connection white wire for ground black wire for low brightness tail light and red wire for high brightness brake light.
  • Light Bar Mounting To flush-mounting the light one option is to drill a center hole or use the existing hole to go through the back wire lead and then fix the two ends by drilling in the two screws provided The other option is to add some washer when fixing the two ends or use a bracket to mount the light to avoid drilling holes for the back wire lead.
  • Wide Application Can be perfectly used on most 12V heavy duty trucks, semi trailers, cargo trailers, boat trailers, travel trailers, horse trailers, RV camper work vehicles, etc. Package Include 2PCS trailer marker ID bar with 2 hardware pack.
Check Stock

2-Digit Take A Number System with Free Ticket Roll

  • 1 Microframe Model 5120 2-Digit LED Display with Power Adapter and 18ga, Two conductor wire. | 9.1-inch LED Display with 5.5-inch digits..
  • 1 B80 Ticket Dispenser with mounting bracket and hardware. | 1 Take-A-Number Sign.
  • 1 B80 Ticket Dispenser Counter Top Stand with mounting hardware..
  • 1 Roll of White 2-Digit Tickets (3,000 tickets per roll) | 2 Brass Push Buttons with 40 feet of 22ga, Two conductor wire. | 1 Wireless infrared remote control (batteries included)..
Check Stock

Furnace Hot Surface Ignitor / Igniter Fits Goodman 201657-03S

  • 90 Degree Mounting Bracket and Two High Temp Wire Nuts Included.
  • Will Also Work With Existing Snap-In Bracket.
  • Replaces Goodman - Amana - Janitrol Part Numbers B1401015 and B1401018.
Check Stock

Lutron Aurora Smart Bulb Dimmer Switch for Paddle Switches | for Philips Hue Smart Bulbs | Z3-1BRL-PKGD-WH | White

  • PROBLEM SOLVER: Philips Hue smart bulbs only work if the switch is in the ON position. The Aurora Smart dimmer switch keeps Philips Hue smart bulbs in ‘ready mode’, so you always have control of your smart bulbs.
  • PADDLE SWITCH SOLUTION: Converts an existing paddle or decorator switch into a smart bulb dimmer switch using included mounting bracket and wallplate.
  • STAYS CONNECTED: Aurora maintains connection with Philips Hue smart bulbs, even if the Wi Fi goes down, so that you always have control over your lights.
  • ANYONE CAN USE: Allows for anyone to adjust your Philips Hue smart bulbs at the wall, no app required.
  • RECOGNIZED AESTHETIC: Rotary knob easily provides the perfect lighting level.
  • tap to turn lights on/off, or rotate to dim/brighten lights.
  • SIMPLE SET-UP: Replace existing paddle switch with wallplate bracket.
  • simply remove existing paddle switch, cap wires and push into backbox and mount the wallplate bracket.
  • MOUNT ANYWHERe: Use the mounting bracket to mount Aurora on almost any surface - no cutting holes or pulling wire required.
  • PACKAGE INCLUDES: (1) Lutron Aurora Smart Bulb Dimmer, (1) Wallplate Bracket for Paddle Switches, and (1) wallplate.
Check Stock

Rockville DWB80W Dual 8\ White 800 Watt Marine Wakeboard Tower Speaker System

  • ...ne Wakeboard 360° Swivel Tower Speakers. (1) Rockville RXM-S6 Marine/Boat 6 Channel Amplifier 2600 Watt Peak / 660w Dyno-Certified RMS With Status Mode LED Indicator.
  • Features: Pair Rockville RWB90B Black 8" 300w Marine Wakeboard 360° Swivel Tower Speakers. 8" Two-Way High Fidelity Speaker System. Adjustable Nylon Mounting Bracket Reinforced With Embedded Steel. Includes Stainless Steel Mounting Hardware. 1" Polymide Dome Neodymium Midrange Tweeter.Built-In Two-Way Crossover Network..
  • Fully Marinized Against Salt & Fresh Water Conditions. Completely Water / Rust Resistant. Terminals Are Sealed with Rubber Gaskets. Specially Tuned for PA Voice Over. Polypropylene Mica Injected Cone with Santoprene Surround. High BL Magnet Motor Structure. Y30 High Density Magnets. Oversized 1.25” Kapton Voice Coil..
  • Features of RMWK4: Rockville RMWK4 4 AWG Gauge Waterproof Marine/Boat Amplifier Wire Installation Kit. 20 ' Translucent, Twisted Pair, High Quality, Tinned-OFC Flexible PVC RCA Cable. 18' 4 Gauge High Current, Low Impedance, Clear Flexible Power Cable with 3' Black Poly Woven Mesh to better resist chemicals in the battery compartment. 18' 4 Gauge High Current, Low Impedance, Light Blue, Flexible Ground Cable..
  • 25' 16 Gauge 100% Tinned-CCA, White, Non-Trans....
Check Stock

(4) Rockville RMSTS80S 8\ 2000 Watt Waterproof Marine Boat Speakers 2-Way Silver

  • ...ne Wakeboard 360° Swivel Tower Speakers. (1) Rockville RXM-S6 Marine/Boat 6 Channel Amplifier 2600 Watt Peak / 660w Dyno-Certified RMS With Status Mode LED Indicator.
  • Features: Pair Rockville RWB90B Black 8" 300w Marine Wakeboard 360° Swivel Tower Speakers. 8" Two-Way High Fidelity Speaker System. Adjustable Nylon Mounting Bracket Reinforced With Embedded Steel. Includes Stainless Steel Mounting Hardware. 1" Polymide Dome Neodymium Midrange Tweeter.Built-In Two-Way Crossover Network..
  • Fully Marinized Against Salt & Fresh Water Conditions. Completely Water / Rust Resistant. Terminals Are Sealed with Rubber Gaskets. Specially Tuned for PA Voice Over. Polypropylene Mica Injected Cone with Santoprene Surround. High BL Magnet Motor Structure. Y30 High Density Magnets. Oversized 1.25” Kapton Voice Coil..
  • Features of RMWK4: Rockville RMWK4 4 AWG Gauge Waterproof Marine/Boat Amplifier Wire Installation Kit. 20 ' Translucent, Twisted Pair, High Quality, Tinned-OFC Flexible PVC RCA Cable. 18' 4 Gauge High Current, Low Impedance, Clear Flexible Power Cable with 3' Black Poly Woven Mesh to better resist chemicals in the battery compartment. 18' 4 Gauge High Current, Low Impedance, Light Blue, Flexible Ground Cable..
  • 25' 16 Gauge 100% Tinned-CCA, White, Non-Trans....
Check Stock

LyxPro Wall Mount Speaker Bracket for Professional Audio PA Speaker Holder Set of 2 Pair Heavy Duty Metal Supports 90 Lbs. Weight Capacity Interchangeable Posts Black - LYXWSB15B

  • PAIR OF HEAVY DUTY METAL BRACKETS : extra strong metal brackets to support 15 inch PA speakers up to 90 Lbs. , comes pre drilled holes for 3 mounting positions to fit all sizes of speakers , can also fit 2 x 8 inch speakers on each bracket with the interchangeable metal posts.
  • EASY INSTALLATION WITH ALL MOUNTING ACCSESORIES INCLUDED : kit comes prepackaged with all mounting hardware included Lag screws , and Toggle bolts for easy installation on any kind of wall or stud with extra posts to secure 1 3/8 -1 1/2 speaker holes.
  • NEAT AND COMPACT DESIGN : Bracket can be removed from mount with one easy pull to store away when not in use Great for School Auditorium ,Class , Recording studio , Theater , Indoor and Outdoor use.
  • SLOTTED DESIGN FOR CONCEALED SPEAKER CABLE : Neat and compact design for cable management , can fit even thick XLR cable to run thru the internal of the bracket with no wire mess running down from speakers.
Check Stock

Light Fixture Mounting Bracket,4 Universal Crossbar,Mount Bracket Light Crossbar with Screws and Nuts,Rotatable and Fixed.Used for Pendant Lamps,Wall Lamps and Living Room Lamps,2 Pack.

  • ★PRACTICAL ROTATABLE AND FIXDE CROSSBAR DESIGN:The structure of the lamp mounting bracket has been upgraded,which can be rotated 180 degrees or....
  • ★ CONTAINS PARTS:2*high-quality galvanized crossbar（3.8 inches long）,4*Mounting screws,4*Mounting nut,3*lamp wire connectors, 4*flat....
  • ★ WIDE RANGE OF APPLICATIONS:The ceiling fan mounting bracket are designed to connect the lamp and canopy to the electrical junction boxes, meet....
  • ★EASY TO INSTALL: light fixture parts are simple to use, only a household Phillips screwdriver and a flat-blade screwdriver are needed..
  • ★ AFTER-SALES SERVICE:The Swivel Crossbar normal life of 10 years.If you encounter any problem when installing or using the product. Please feel....
Check Stock

DS18 JK-Tube/WH 48.3' - 50.3' JK Mounting Tube Light Bar with Mobile Clamps Perfect for Mounting Wakeboard Speaker Towers and Pods on Roll Bars and Cages…

  • Includes 2 Long mounting bracket (1997-2003 TJ) , 2 Short mounting bracket (1987-1996 YJ) , 4 M6-1.0 x 3/4 Screw/Bolt , 4 5/16” x !: Sheet metal screw , (4) 5/16” x ! Flat washer , (4)5/16” x ! Lock washer , (1) Wire Harness – 10’ Long.
Check Stock

Infinity 3/4 Kappa Tweeter Black INFSPKKA753TAM

  • Flush- and surface-mount hardware included.
  • Handles up to 50 watts RMS (150 watts peak power).
  • Starfish bracket for mounting in factory tweeter locations.
  • Included components: 2x tweeters (6" wire attached), 2x 16" lengths of speaker wire with in-line crossovers, 2x threaded flush-mount cups, 2x plastic....
Check Stock

Durable Universal Marine Stereo Cover - Water Resistant Boat Radio Protector Shield with Flip-Up Door & Neoprene Gasket - Compatible with Dual Shaft & DIN Style Stereos - Pyle PLMRCB3 , Black

  • SMOKE COLORED HOUSING: This durable marine stereo cover has a tinted front panel, so you can still see the controls. It also comes with a UV-resistant housing to keep it from getting overheated.
  • SUPPORT SHELF FOR RADIO: The marine stereo / CD player comes with a strong stainless steel mounting for sufficient rigidity. This housing is compatible with dual shaft and DIN size receivers.
  • DURABLE RADIO COVER: This universal marine radio cover comes with wires for easy deck or overhead installation. It is also made of heavy duty material to make sure it can be used for a long period of time.
  • Universal Marine Stereo Housing - Fits Din Style or Removable Stereos - Pre-Wired Power(3 Wire), Speaker (8 Wire), RCA (2 Wire), Antenna.
  • Protect your Stereo from Harsh Marine Environment - U shaped Mounting Bracket for Deck or Overhead Installation - UV Resistant Plastic.
  • Includes a 2 Position Hinged Front Door - Stainless Steel Mounting Hardware - Dimensions: 4''(H) x 9.1/8''(W)x 1/2''(D).
  • Sealed with a Neoprene Gasket - Polycarbonate Bracket.
  • Accommodate Dual Post/ Removable & DIN Style Stereos - Support Shelf for Radio in Rear of Housing.
Check Stock

Planet Bike Protegé 5.0 bike computer

  • 5 functions: current speed, ride time, trip distance, odometer and clock.
  • 4-line MacroMonitorTM LCD displays up to 4 pieces of data at a glance.
  • Mounting hardware includes: 25.4-31.8mm handlebar bracket and 82 cm wired front wheel mounting kit.
  • Current speed, ride time, trip distance, odometer, and clock.
  • Includes 82 cm wire mounting kit for front wheel.
Check Stock