Top Wire Strain Relief Connector

Valterra RF850 1/4\ MPT x 3/8\ Barb Adapter

  • Right Angle Nylon Cable Glands NPT Thread - These Right Angle Cable Glands are corrosion resistant..
  • Seal & clamp system allows the cord connector to tighten in a circular sequence on the sealing ring to give outstanding strain relief without twisting or damaging the cable.
  • Simply push the cable through the liquid tight Nylon strain relief & tighten locknut for quick installation.
  • Threads into your panel for clearance, locknut included.
Check Stock

trueCABLE RJ45 Strain Relief Boots Small 5.5 to 7.0mm Cut-to-Fit PVC Plug Cover Transparent 100 Pieces

  • DUAL PURPOSE SNAGLESS DESIGN. Provides strain relief while protecting your ethernet cable and RJ45 connector..
  • VERSATILE & SECURE. Cut to fit, lock in place style boot compatible with 5.50 mm to 7.00 mm cable ODs..
  • EASY TO USE. Trim boot to fit, slide onto your cable, attach connector, slide boot into the rear of RJ45 plug, crimp, and done..
  • TRANSPARENT. Give your terminations a professional appearance, protect your hard work, and maintain bend radiuses required for standard compliance..
  • 100 PIECE RESEALABLE BAG. These transparent RJ45 strain relief boots are sure to make your install hassle-free..
Check Stock

Cable Matters 100-Pack 8mm Strain Relief Boots for Large Diameter Cable in Black

  • Strain relief booTS for large diameter cable supports 23-24 UTP Cat 6, 6A, or outdoor cable with an outside diameter up to 7.5mm.
  • Difficult to find RJ45 strain relief boots pair with RJ45 cable termination plugs for larger cables.
  • Cat 6 cable compatible strain relief boots are used for terminating bulky 23 AWG Cat 6 or Cat 5e unShielded network cable with a large outside diameter.
  • Snagless design protects the RJ45 clip on modular connectors from damage.
  • Slips over the clip to protect the modular connector when routing the cable.
  • Sturdy cable boots in a Cost effective 100-pack support the weight of a heavier cable such as a Cat 6A cable with a thick spine or a gel-filled outdoor rated able.
  • compatible with the Cable Matters Cat 6 RJ45 Modular Plugs for Large Diameter cables (Model 180064).
Check Stock

Spurtar 7 Pin Trailer Plug 7 Way Round RV Style Flat Blade Trailer Light Wiring Harness Trailer End Towing Replacement Connector Male End Adapter 12V Towbar-New Upgraded

  • Usage: Spurtar Industry standard 7 way trailer plug RV blade trailer connector commonly used on RV camper trailers for towing RV travel trailers.
  • Good Connection: 7 pin trailer plug with brass terminals for better conductivity and screw strain relief clamp which keeps trailer wire from pulling out of connector.
  • Safe Grip: Userfriendly & ergonomic design with safety latch to ensure safe and strong grip when plugging in or unplugging trailer wiring.
  • Versatile: 7-way RV blade connector is a great replacement and interchangeable with any trailer-side 7-way RV connectors.
  • RELIABLE: Spurtar 7-pin trailer wiring plug comes ready to splice into your existing trailer wiring. It can be used to connect the taillights, brake lights, reverse lights, turn signals, trailer brakes and auxiliary power.
Check Stock

Jabinco (Pack of 5) Speaker Wire Cable to Audio Male RCA Connector Adapter Jack Plug

  • VCE rca male to f type female adapter converts an RCA/Phono socket to a standard F socket, or an F plug to a RCA/Phono plug connector..
  • Suitable for coaxial networks used in video, data and telephony applications..
  • Gold plated brass body enhanced corrosion resistance. Constructed of durable high quality material..
  • A high-tech strain relief provides a secure link to cable or wire, assuring a quality connection for the ultimate performance..
  • Package contents: 2 x VCE RCA male plug to F type female jack coupler. Items come with 18 months warranty and lifetime support..
Check Stock

Cable Matters UL Listed 6-Pack RJ45 Shielded Keystone Jack with Integrated Shutter

  • Full metal jacket RJ45 Shielded keystone jacks fit a standard wall plate or patch panel with a keystone blank outlet.
  • Robust die-cast housing provides superior shielding and mitigates alien crosstalk.
  • Cat 6a performance for a 10G BASE-T channel compliant network.
  • Supports 23 to 26 AWG solid or stranded wire.
  • Cat6A connector is backwards compatible with Cat 6 and Cat 5e bulk cable.
  • 180 degree easy termination jack supports tool free or crimp tool termination.
  • A 180 degree wide-angle, hinged design provides easy access and termination.
  • Tool free cap has universal T568-A or T568-B labels.
  • IDC modules accept a 110 impact tool for wire insertion.
  • compatible with the Cable Matters Cat6A Crimp Tool Model 180087.
  • Superior construction combines a one piece metal keystone to suppress EMI/RFI electromagnetic interference, NEXT, and AXT crosstalk.
  • Stickers on the inside prevent accidental contact with the metal housing.
  • Integrated metal collar assists with cable strain relief.
  • Snap-in retaining clip ensures a secure connection.
  • Auto-closing shutter protects the RJ45 contacts.
  • Plug in a Cat6A patch cable to open the shutter.
  • PoE plus compliantShielded RJ45 connector for IEEE 802.3at Power over Ethernet (PoE+) network applications up to 30W with a Cat 6A Ethernet cabl....
Check Stock

Platinum Tools 202010J RJ-45 Category 6 EZ Style Connector 100/Jar

  • Cat 6 RJ45 connector terminates unshielded twisted pair cable for making a custom-length Cat 6 Ethernet cable.
  • Supports 23-26 AWG round or flat stranded wire with an outside diameter up to 5.4 mm.
  • Crimp style Cat6 pass-through connectors terminate solid or stranded cable with a three point staggered contact to provide a secure connection.
  • Simply feed the wires through the openings in the pass thru RJ45 connectors and crimp the connector for a faster termination with less effort.
  • Category 6 performance rated for a Gigabit Ethernet channel compliant network.
  • Backwards compatible with Cat 5e stranded or solid cable.
  • Gold-plated contacts on 8P8C network connectors provide superior transmission and resist corrosion for a Cat6 cable.
  • Cost effective 100-pack of Cat6 connectors provides enough connectors for a large project or multiple small jobs.
  • Construct multiple patch cables in the perfect length for router, patch panel, or workstation applications with this crimp connector.
  • Cat 6 crimp connectors are compatible with Cable Matters RJ45 Strain Relief Boots to protect the clip from accidental damage and bolster the integrity of the cable.
  • Convenient jar storage container protects and stores the Cat6 RJ45 modular connectors until your next project.
Check Stock

Cable Matters 4 Prong to 4 Wire Range Cord 4 ft, Heavy Duty 6/8 AWG 50 Amp Cord (NEMA 14-50P to 4-Wire)

  • UL listed electric range cord 4 prong fits a standard 4 wire oven stove cord outlet.
  • 4-prong 50A outlets are commonly found in a newer building or homes.
  • 4 wire oven range power cord with a 50A NEMA 14-50 plug fits most newer range models.
  • Purchase new 4 wire range cords for electric ranges that are often sold without the power cord.
  • Heave duty 6 + 8 AWG range cord is compatible with a 30/40/50 Amp electric stove oven outlet.
  • SDRT cable jacket on the electric oven cord incorporates insulated thermoplastic construction.
  • Supports up to 300V and 140F to prevent overheating.
  • Rugged & safe with a right-angle 4-prong range connector that connects securely into the outlet.
  • Ring terminals provide an easy installation and a secure connection.
  • Strain relief brackets support the weight of the cord at the range end.
  • Compatible with range model from popular brands such as GE, Whirlpool, Kitchenaid Samsung, Frigidaire, and Kenmore.
  • A lifetime warranty and product support provides peace of mind when purchasing.
Check Stock

iHome Sleep

  • HIGH QUALITY - home strain relief is 4X tougher than market standard cables. They are made with high quality components resulting in a product that will operate as intended and last a long time..
  • FUNCTION - Charges and syncs almost any device that requires a micro USB cable. Braided nylon covering protects the inner cable and prevents the wires from splitting..
  • COMPATIBLE - Works with any device that uses a Micro USB cable for power and sync. Works with smartphones, speakers, headphones, and an almost limitless variety of accessories..
  • BRAIDED DESIGN - Braided cables are durable and cool looking, and come in a variety of colors. The double injected connector housing looks great and provides extra strain relief..
  • 5 FEET LONG- Whether you just need a little extra flexibility to charge while you play, or just want to use that hard to reach outlet, with a 5-foot cable length we’ve got you covered..
Check Stock

100pcs Heat Shrink Bullet Connectors, EEEkit Female & Male Bullet Butt Terminals Insulated Wire Splice Connectors Kits Waterproof Electrical Marine Crimp Automotive Connectors (3 Colors, 3 Sizes)

  • 【Function】Heat Shrink Bullet terminals protects splicesfrom water and corrosion.Providing strain relief and against vibration in rugged environments，which excellently insulates and protects electronic connections..
  • 【Great Wire Contact】Copper barrel provides increased current flow, and ensures less voltage drop, preventing wiring failures and reducing equipment downtime..
  • 【Durability】Thick copper barrel ensures a strong wiring connection every time. Your wire will never slip out of these heat shrink connectors. Adhesive lined heat shrink tubing provides high tensile strength, stretch and mechanical damage resistance..
  • 【Compatiable】Insulated Female / Male Bullet Terminals Connector, excellent splice for boat, vehicle, home improvement or scientific project, and many other applications..
  • 【100% Satisfaction】 Buy with confidence. RISK FREE 100% money-back guarantee. If you have any questions, please feel free to contact us..
Check Stock

StarTech.com VGA to VGA Cable - 1 ft - HD15 M/M - Coax High Resolution - Computer Monitor Cable - Video Cable - VGA Monitor Cable (MXT101MMHQ1)

  • Easily connect a High resolution display to a Desktop PC using VGA.
  • Ideal for high resolution monitors (1920x1200 and above).
  • Impedance matched at 75 Ohms for full brightness and vibrant picture color.
  • Molded connector ends with strain relief.
  • Triple-coaxial + twisted-pair wire for crystal clear display.
Check Stock

Kichler Direct-to-Ceiling 2 inch Round Mini Recessed 27K Downlight in White

  • Light is directed downward in an inverted cone or V shape..
  • What comes in the box: (1) light fixture (with tether/screw connector), (1) driver box (with tether/screw connector),   (2) mounting screws, and (1) strain relief connector..
  • Warranty: five (5) year from the date of purchase.
Check Stock