Top With Axial Indexing

Kreg Hardware Installation Kit Contains Slide Pull Hinge and 2 Micro Clamps

  • Make cabinet door installation easy! Get drill press accuracy with any hand drill..
  • Accurate hinge positioning with built-in indexing tabs.
  • reliable drilling with bit guide and stop collar.
  • adjustable cams ensure proper hinge offset..
  • Install knobs and pulls with easy, repeatable accuracy with adjustable guides for accurate hole placement.
  • built-in measuring scales for repeatable....
  • Accurate drawer slide positioning with built-in indexing tabs.
  • repeatable results without measuring and marking.
  • versatile for use in cabinets, cases,....
  • The pair of face frame clamps are very handy for hardware installation, frees up your hands! Great also for use with building the cabinets!.
Check Stock

Ripper - The Ripper - Adjustable Head Wrecking Bar

  • Versatile – The indexing head allows you to use the tool for millions of different uses. This will fast become the most useful tool in your box!.
  • Durable – From the bulked-up head design with he hammer strike plate, to the solid steel shaft, this tool was built for the grind and built to last.
  • Design – Narrow jab ends of the main claw, to the indexing head mechanism, this tool has an abundance of features!.
  • Comfort – The oversized grip handle allows you to use for long periods at a time without hurting your hands.
  • Uses – Perfect for removing trim, molding, tile, flooring, cabinets, windows, doors, fixtures, and more.
Check Stock

Ripper - The Claw - Adjustable Head Wrecking Bar

  • Versatile – The indexing head allows you to use the tool for millions of different uses. This will fast become the most useful tool in your box!.
  • Durable – From the bulked-up head design with the hammer strike plate to the solid steel shaft, this tool was built for the grind and built to last.
  • Design – Narrow jab ends of the main claw, to the indexing head mechanism, this tool has an abundance of features!.
  • Comfort – The oversized grip handle allows you to use for long periods at a time without hurting your hands.
  • Uses – Perfect for removing trim, molding, tile, flooring, cabinets, windows, doors, fixtures, and more!.
Check Stock

Powermatic 3520C Wood Lathe, Centennial Edition, 2HP, 230V 1PH (1353001G)

  • Variable-Speed Motor: Maintain speeds as low as 15 RPM, and as high as 3,200 RPM..
  • Added Safety: Fully-enclosed VFD for increased user protection, with main power disconnect switch located on rear of headstock..
  • Solid Tool Rest Placement: Banjo features a non-marring, pinch style clamp..
  • Added Precision: Digital indexing readout simplifies the indexing process..
  • Convenient Controls: Magnetic-backed moveable control box provides versatility and safety..
  • One-Handed Operation: Self-locating ergonomic spindle lock design..
  • Adaptable Outboard Turning: Sliding headstock and removable tailstock..
  • Increased Longevity: Tailstock incorporates anti-rotation key and Acme threads for smoother operation..
  • Bonus Accessories: Includes an LED lamp and anti-fatigue mat..
Check Stock

Bushfire Rescue (Extreme Adventures #2 )

  • Solid Cast Iron Construction: Swing: 6-1/2"/168 mm. The dividing head features a rigid mirror finish that is wear-resistant, a good choice for long-term use. Its delicate parts work perfectly, mathematically dividing the materials to be cut..
  • Easy of Adjustment: The headstock of the dividing head for the milling machine can tilt from 10 degrees below horizontal to 90 degrees vertical so that you can handle the stuff of different sizes by changing its angle..
  • High Precision Indexing Plate: The universal dividing head comes with a direct indexing plate and an interchangeable one on the head, and two replacement interchangeable ones with different numbers of holes. It's the dividing plates that set the precise distance between cuttings..
  • Strong Workpiece Support: The coming package also includes a tailstock that will give strong support to the long metal stick you are going to deal with, providing a more stable working condition..
  • Versatile Application: The rotary indexer is used on the tables of milling machines and other machine tools, including drill presses, grinders, and boring machines..
Check Stock

1/10 Rock Crawler Axle Front and Rear Portal Axles Complete Metal Alloy for Axial SCX10 Honcho Model Crawler Car

  • Suitable for: RC Car Front Rear axle fit for 1/10 Axial SCX10 RC Model Crawler Car. SCX10 crawler car built for extreme off-road capability that takes you to new places and new adventures..
  • Front crawler axial high pinion gears for added ground clearance and better driveshaft angles.Larger load bearings used around the gear set to reduce flex and create a stronger drivetrain..
  • Aluminum alloy material: Axial scx10 portal axles, Aluminum alloy shell CNC, internal steel gear and drive shaft, Professional manufacture, excellent properties, high reliability. Alloy Front & Rear Axle Assembly Parts Lightweight, durable. Directly replace Original plastic axles, Made your car more attractive and cooler..
  • Easy to install: 1/10 rc portal axles the total length is 213mm/8.39in, and other installation accessories are attached, Aluminum Alloy Axle Front and Rear Axle easy to install, perfect fit, make your remote controlled car cool and attractive. Lightweight upgrade enhances car's performance in handling and durability, providing unmatched driving versatility..
  • Note: Axial SCX10 Axle may loose gears during transportation. It can be used normally with only slight adjustments. If you encounter such problems, please feel free to contact us..
Check Stock

Aluminum Alloy Complete Front and Rear Portal Axles for Axial SCX10 III AXI03007 SCX10.3 1/10 RC Crawler Car Axle Upgrade Parts - Red + Black

  • Compatible with: The Front and Rear portal axle housing assembled are the upgraded parts for Axial 1/10 RC Crawler Car Axial SCX10 iii AXI03007 AR45. Built for extreme off-road capability that takes you to new places and new adventures..
  • Aluminum Alloy + Steel: The Portal axles Material Machined from CNC Aluminum and Anodized for Good Looks Directly Replace Original Plastic Axles. a great replacement and upgrade accessory for your rc car..
  • Front crawler axial enhances SCX10 III RC Crawler Car Performance in Handling and Durability, Providing Unmatched Driving Versatility. it is safer than ordinary axles and is higher from the ground, easy to install and configure the drive shaft to make your remote control car more attractive..
  • 1/10 rc crawler axles easy to install and remove, fit to the car axle perfectly. durable to increase service life, further improves the body chassis, making it significantly improve the climbing performance..
  • Axial scx10 iii portal axles provide an abundance amount of ground clearance,which can give you guys have a consistent feel ascending and descending all types of terrain..
Check Stock

ShareGoo 2PCS Metal 25T Servo Horn M3 Threads Steering Arm Server Rocker Compatible with Futaba Savox Power HD HSP Servos Motor 1/8 1/10 RC Car Truck,Red

  • Package includes 2PCS 25T servo arm.CNC machining makes it precise in size and stable in performance..
  • Compatible with mostly standard servo motors,for example, compatible with Futaba HSP Power HD Axial Savox Xcore MG995 MG996R MG946R and So on.Compatible with Traxxas Axial Tamiya HPI HSP Wltoys Axial SCX01 rc car truck..
  • Distance from hole center to hole center：12mm, 16mm, 20mm.
Check Stock

Axial Capra Axles Front and Rear Portal Axles Housing Case Parts for 1/10 RC Crawler Car Axial Capra 1.9 UTB Unlimited Trail Buggy Currie F9 Upgrades Aluminum Alloy - Black

  • Capra axles for Axial Capra 1.9 UTB RC crawler car, Built for extreme off-road capability that takes you to new places and new adventures..
  • Axial capra portal axles the aluminum alloy material, Machined from CNC Aluminum and Anodized, Directly Replace Original Plastic Axles. Hardened Steel Gears and Construction Driveshafts, Full Ball Bearings, Stainless Steel Servo Steering Links..
  • Capra axial axle front and rear easy to install and remove, fit to the car axle perfectly. durable to increase service life, further improves the body chassis, making it significantly improve the climbing performance..
  • Capra front rear axle up to 45 degrees of steering, Enhances Axial Capra RC Crawler Car Performance in Handling and Durability, Providing Unmatched Driving Versatility..
  • 1.9 capra portal axle provide higher ground clearance and reduce the torque on other drivetrain components for improved performance..
Check Stock

ESS Dual Engine Sound Simulator System For Traxxas TRX4 Axial Wraith SCX10 SCX10 II RC Models

  • ESS-DUAL sound simulator is perfectly compatible with Axial SCX10II, Axial SCX10, Axial Wraith, Traxxas TRX4. It is so easy to operate and gives so....
  • ESS DUAL+ Plus uses an advanced DNS/DCR algorithm to reproduce the sound of real engines. Supports 2 sets of engine sounds, which enables fast....
  • ESS dual sound system supports an AUX channel that can simulate a variety of sounds such as alarm, engine, starting, brakes, blow off valve, red line....
  • RC models engine sound simulator supports firmware updates and function upgrades.ou can download and use another sound effect with the RC/PLUS app.Can....
  • ESS-Dual Volume can be set up by clicking +/- Increase “+”，Decrease “-”(8 Level). Sound Switch in the running mode, long press “-”. The....
Check Stock

10pcs 6700ZZ Thin Section Bearing Thin Wall Mini Ball Bearings Double Shielded 10x15X4mm

  • This A-Type, angular contact ball bearing is best suited to applications with high axial loads. This bearing also works well in radial or combined radial-thrust applications but should never be used alone to support moment loads or reversing axial loading..
  • Thoroughly coated in MIL-PRF-3150 or MIL-PRF-6085 oil and drained of excess and vacuum sealed in a plastic bag for shipping..
  • Manufactured to ABEC 1F precision tolerances related to the bearing bore, outer diameter, radial runout, axial runout and radial play..
  • Static Thrust Rating 970 pounds, Dynamic Thrust Rating 960 pounds.
  • This RBC thin section ball bearing can be advantageous in a design where space limitations, combined loading, or weight restrictions are proving to be challenging to overcome with a traditional ball bearing solution..
Check Stock

Shimano Ultegra ST-R8000 Left Double Lever, Mechanical

  • Train harder and smarter with industry-leading accuracy with 3D technology capably of measuring tri-.
  • axial strain 3D patent pending power meter technology measures tri-axial strain to provide accurat.
  • e consistent data Left sided, compact design, extremely lightweight at 9 grams Data accuracy is.
  • 4iiii Precision Ride Ready Left Side Power Meter.
Check Stock