Top With Low Carbon Steel

15' Long hand forged Damascus steel Eagle Kukri Knife, 10 inch long full tang blade, Bull horn scale with steel bolster, Cow hide Leather sheath with belt loop

  • 15" Long hand forged Damascus steel full tang blade Eagle Kukri Knife. Full tang blade goes through all the handle as well in a single piece so full tang blades are durable and stronger than non full tang blades.
  • Natural Bull horn scale with steel bolster. Handle Length is 5 inches with inserting hole. Up to standard Eagle Kukri Knife Comes with a fine quality extra thick and robust leather sheath.
  • Up to standard Eagle Kukri Knife comes with a fine quality extra thick and robust leather sheath that has belt inserting loop..
  • Approximately 6 mm Thick Twist pattern Damascus steel. Blade is made of Damascus steel by forging the 1095 and 15N20 high and low carbon steel . The sheath has belt inserting loop and can be worn on belt.
  • Our Damascus steel is prepared by forging over 465 layer of high carbon and low carbon steel. Blade has been given an excellent heat treatment to get it well hardened Hardness 56 to 58 HRC.
Check Stock

PSCCO 12PCS U-Shaped Steel Tapped Hole Clip On Nut Including Screws

  • Corrosion resistant metal. However, over time, all metals tend to corrode. However, the properties of this metal are better than those of soft low-carbon alloys such as carbon steel..
  • U-shaped Steel Tapped Hole Clip Size: 25*14*5mm.
  • Just clamp it on the panel and fix it with the screws provided..
  • Clips are galvanized and screws are powder coated..
Check Stock

4 pieces Damascus steel blank blade set, 7, 8, 9 and 9.5, inches long hand forged blank blade skinning knife set, 2.5 to 4.5 inches long cutting edge, compact pocket knife and skinning knife blades

  • 4 pieces Damascus steel full tang blade skinning knives set. Overall 32 inches Damascus steel blade..
  • Set Contains: a) 9" long trailing point blade with 4.5" cutting edge. 3 pins holes and a Mosaic hole. b) 9" long drop point blade skinning knife with 4" cutting edge. 3 pin holes. c) 7" long pocket spear point blade with 2.5" cutting edge. 3 pins holes and a Mosaic hole d) 8" long compact straight point blade with 3" cutting edge. 3 pin Holes and a Mosaic hole.
  • Full tang blades are considered stronger and durable then non full tang. Up to standard skinning and Pocket Knives..
  • Blade is made of Hand forged Damascus steel by forging the 1095 and 15N20 high and low carbon steel.
  • Approximately 4 mm Thick Twist pattern Damascus steel clip point blade. Our Damascus steel is prepared by forging over 465 layer of high carbon and low carbon steel..
Check Stock

1 Pair Western Style Antique Spur, Male Knights Equestrian Equipment Spurs for Boots, Horse Riding Ornaments Low Carbon Steel Carving Spurs with Hand Engraved Trims

  • ...ble for all riding boots and male knights, creating a versatile denim temperament. Which can helps to improve leg skills or train horses, improve equestrian skills, assist in communication between knights and horses..
  • Horse Riding Ornaments Black Steel Engraved Spur- Western Style Antique Spurs are made of black low carbon stee materials, durable and not easy to bend, strong and resistant to corrosion. The rotating tooth roller not only can effectively control the horse, but also reduce the damage to the horse. The carved stud and the metal pendant at the end. At each step, a clang sounds and takes you into the wild Western world..
  • Wide Applications of the Horse Spur- The curved gear thorn reduces the stimulation of the horse and avoids significant damage to the horse. Knight Equipment Spurs are suitable for all kinds of occasions, such as training horses/ equestrian events/ dressage/ sports/ entertainment/ performances/ farms/ ranch etc..
  • Easy to Operate and Use- The slot is located at the rear and can be fixedly mounted between the spur gear and the belt. Spurs for Boots, Western Retro Cowboy Black Carbon Steel Carving Spurs with Roller..
  • Package Includes- 1 Pair of Western Antique Spur.
  • Black Low Carbon Steel Spurs, Western Spur, Equestrian Equipment ....
Check Stock

FGen 100pcs Low Noise Motor Dedicated 608RS Skateboard Bearing Fingertip Gyro Special Bearing Red

  • Bearing material: bearing material is divided into bearing steel, high carbon steel, low carbon steel, sealing material is divided into iron cover and....
  • Bearing model: 608RS bearing length: 8mm * 22mm * 7mm, with skateboards, skates, roller skates, long, electric skateboard, the highest precision in....
  • Deep groove ball bearings are mainly subjected to radial loads and can also bear both radial and axial loads. When it is only subjected to radial....
  • This type of bearing has small friction coefficient, high speed limit, simple structure, low manufacturing cost and easy to achieve high manufacturing....
  • Dimensional range and form vary, used in precision instruments, low noise motors, automobiles, motorcycles and general machinery, etc. It is a widely....
Check Stock

Cuetec Cynergy CT-15K Carbon Shaft (3/8x10)

  • [Low Deflection Cue Carbon Fiber Shaft]This carbon fiber shaft is filled with a customized foam inside which allows for less deflection on shots with a lot of spin, and it performs consistently and accurately,it is suitable for most professional players.
  • [High Stiffness]The carbon fiber material features with high stiffness and tensile strength,so the carbon fiber shafts are dent,warp,and scratch-resistant.
  • [10.5mm/11.8mm/12.5mm Tip Size]There are all premium multi-layered leather tips,the difference is in the ferrule,10.5mm with stainless steel ferrule,but 11.8mm/12.5mm with XTC ferrule.
  • [3/8×8 Joint]3/8×8 stainless steel joint connects the shaft and the butt together tightly,it provides a sustainable and smooth energy transfer.
  • [Weight Adjustable] You can add or subtract the specially made bolts to add or subtract weight,so you can get a carbon fiber cue which the weight you are satisfied..
Check Stock

Helen Chen's Asian Kitchen 14-Inch Excalibur Nonstick Wok Stir Fry Pan

  • Helen’s Asian Kitchen Excalibur Non-Stick Wok for healthy low-fat cooking, stir frying, stewing, sauteing, steaming, braising and frying with less oil.
  • Made from 2-millimeter carbon steel and Premium Excalibur nonstick coating.
  • Nonstick carbon steel distributes heat to cook foods evenly and release them without sticking.
  • Flat bottom design sits securely on any stovetop.
  • lifetime warranty against manufacturer’s defects.
Check Stock

E7018 3/32'' Welding Electrode Rods Carbon Steel Welding Electrode 5Lb for Mild or Low Alloy Steels

  • Material: The package includes 5LB E7018 3/32'' basic carbon steel electrode.
  • Standard: AWS A5.1 E7018 ISO2560-A E42 3 B 1 2 GB/T5117 E5018.
  • Advantage: The E7018 Stick welding rod is a multi-purpose electrode with excellent handling properties. 7018 Arc welding rod performs particularly well when welding mild or low alloy steels such as bridges, construction, shipbuilding and pressure vessel fabrication, to name a few. E7018 Stick electrode can also be used in construction and maintenance of a series of construction machinery such as bulldozers, agricultural or mining equipment.
  • Application：E7018 carbon steel electrode Used to weld the Marine steels (A、B、D、E、AH36、DH36、EH36）and the same grade strength low carbon steel, mechanical performance , impact value can be as high as 150J @ -30 ℃. AC & DC.
  • Service: Fox Alloy Time-proven formulation.
  • A team of experienced welding engineers ready to answer all your welding questions.
Check Stock

Tojiro DP Damascus 3-piece Knife Set

  • Set Includes: 4" Paring Knife, 6" Utility Knife & 8.25" Gyuto/Chef's Knife.
  • Damascus pattern on each blade is created by forging 37 layers of both low carbon and high carbon stainless steel folded over the thick VG-10 core of premium cobalt alloy steel.
  • Bolster adds heft and balance while the blade and edge is still thin and razor sharp.
  • Micarta handle with three stainless steel rivets.
Check Stock

Handmade Double Head Berserker Axe, Large Norse Axe, Hand Forged Steel Axe,Double Blade Axe, Forest Axes Hewing Axe Broad Axe Hunting Axe Dane Axe

  • All of our knives-Swords-Axe are 100% handcrafted. True quality material used to form the blade. The handle materials, blade steels, and leather sheaths are made professionally with no expense spared. Great handle fitting, exception sharp edge, nicely balanced grasp''.
  • Carbon Steel are ferrous alloys based on Iron, Carbon and small level of other alloying elements such as -Manganese or Aluminum. Carbon Steel include soft, non-harden able low carbon or mild Steels such as 1020 as well as harden able high carbon steel such as 1095. Steel alloys are used in a wide variety of Applications in almost every Industrial Segment..
  • We work professionally by mean of a handmade axe. also comes with leather sheath and hold perfect edges thanks!!!.
  • Head width 8.5inches Approx. Average weight without sheath 4000 Gram Approx. Life time Warranty on Manufacturers defect..
Check Stock

Toijro DP Damascus 7-inch (180mm) Nakiri Knife

  • Damascus pattern on each blade is created by forging 37 layers of both low carbon and high carbon stainless steel folded over the thick VG-10 core of premium cobalt alloy steel.
  • Bolster adds heft and balance while the blade and edge is still thin and razor sharp.
  • Micarta handle with three stainless steel rivets.
  • Great for cutting vegetables making it easier to cut straight slices.
Check Stock

OHM-07711 Damascus chef knife 5Pcs chef knife set handmade knives hand forged knife kitchen knife set paring knife mothers day gift gift for him birthday gift

  • Sizes From Top to Bottom, Overall: 13 ", 12", 12", 11.5", 9.5" : Handle: 5", 5", 5", 5", 5: Blade: 8", 7", 7", 6.5", 4.5" Thickness: 3mm approx Blade....
  • Handle: Excellent Combination of Natural Rose Wood With Steel Bolster. Product include Custom Made Real Cow Hide Kit Roll..
  • A BEAUTIFULLY HAND FORGED PIECE OF ART: The High Grade Damascus Steel Used For This Blade Consists Of Layers Of Low Carbon & High Carbon Mixture....
  • AN EXCELLENT GIFTING IDEA: Offer this unique hand made Damascus Kitchen Knives Set to a special friend, family member or co-worker and have them....
  • CARE AND MAINTENANCE : This product is combination of high & Low carbon steel so it should need extra care to prevent rust. Best place for storage is....
Check Stock