Top Wood Finish Machine

216 Pieces Stainless Steel Self Tapping Sheet Metal Screw Assortment 34 Different Size of Oval and Pand Head for Fastening Wood Metal or Fiberglass

  • The sheet metal and machine screw kit offers 2 types of Screws for your fastening needs. Sheet metal Screws are self tapping, fully threaded and are used to fasten wood, metal or fiberglass while machine Screws fasten metal together, are fully threaded and have a blunt end..
  • Sheet Metal Screws for fastening wood, metal or fiberglass..
  • Machine Screws for fastening metal together..
  • Sturdy stainless steel construction and finish..
  • #6 x 1/2 #6 x 3/4 #6 x 1 #8 x 1/2 #8 x 3/4 #8 x 1 #8 x 1-1/4 #8 x 1-1/2 #10 x 1/2 #10 x 3/4 #10 x 1 #10 x 1-1/4 #10 x 1-1/2 #10 x 2 #12 x 3/4 #12 x 1 #12 x 1-1/2 #12 x 2.
Check Stock

Deltana S35R4BB10B Ball Bearing Steel 3 1/2-Inch x 3 1/2-Inch x 1/4-Inch Radius Hinge

  • Soss invisible hinges for wood or metal applications.
  • With no. 53 soft wood and no. 57 hard wood pilot hole.
  • Zinc body with steel pins,minimum Door Thickness: 1-1/8 inch.
  • The SOSS Invisible hinge model #212 (And all other SOSS Invisible Hinges) are completely flush with the edge of the door and frame. The space between the door and frame when the model #212 is closed is 3/64 Inches.
Check Stock

Howard Products CF0016 16 OZ Wood Soap, Clean-A-Finish - Quantity 6

  • EASY THREE STEP PROCESS: Clean wood surface, restore the finish, then add Beeswax for the top coat finish. You eliminate blemishes in wood finishes and restore the original color and luster without removing any of the existing finish. Clean and polish the surface, penetrate the finish with stain, and leave the original finish intact..
  • HOWARD ORANGE OIL is not just any Orange Oil or Cleaner, this product was developed to clean the toughest grime and years of buildup grime dirt grease built-up oils aerosols. Great orange fragrance gentle on your hands no silicone or wax no harsh orange dye..
  • Clean and dust kitchen cabinets, hardwood floors, wood paneling, furniture, antiques, any wood surface. Great to clean kitchen cabinets clean wood floors clean wood cabinets. Best wood floor cleaner can be used as an antique wood cleaner..
  • Restore-A-Finish preserves the original wood finish it also helps preserve its authenticity and value whereas stripping the finish may literally strip the piece of its value. Almost any existing wood tone from a Birdseye Maple to a Jacobean can be closely matched using one of the nine available finish colors..
  • USE FEED N WAX TO TREAT dry and damaged wood furniture antiques and all hardwood surfaces. From now easily repair steam ....
Check Stock

Global Door Controls TC201-DU Compact Commercial Door Closer in Duronotic with Adjustable Spring Tension - Sizes 1-4

  • Non-handed-reversible, adjustable spring tension, Duron tic Finish.
  • Comes with wood/machine screws, for all aluminum, wood or hollow metal commercial applications.
Check Stock

Howard Feed N Wax 16 oz x 4 Bottles, Beeswax Furniture Polish Great For Dry and Damaged Wood, Restore Kitchen Cabinets, Restore Antiques and Wood Paneling

  • EASY THREE STEP PROCESS: Clean wood surface, restore the finish, then add Beeswax for the top coat finish. You eliminate blemishes in wood finishes and restore the original color and luster without removing any of the existing finish. Clean and polish the surface, penetrate the finish with stain, and leave the original finish intact..
  • HOWARD ORANGE OIL is not just any Orange Oil or Cleaner, this product was developed to clean the toughest grime and years of buildup grime dirt grease built-up oils aerosols. Great orange fragrance gentle on your hands no silicone or wax no harsh orange dye..
  • Clean and dust kitchen cabinets, hardwood floors, wood paneling, furniture, antiques, any wood surface. Great to clean kitchen cabinets clean wood floors clean wood cabinets. Best wood floor cleaner can be used as an antique wood cleaner..
  • Restore-A-Finish preserves the original wood finish it also helps preserve its authenticity and value whereas stripping the finish may literally strip the piece of its value. Almost any existing wood tone from a Birdseye Maple to a Jacobean can be closely matched using one of the nine available fin....
Check Stock

Minwax Antique Oil Finish, Pint

  • Minwax Antique Oil Finish may be used over finished and unfinished wood.
  • Antique Oil Finish is recommended for interior wood surfaces such as cabinets, tables, paneling, doors and trim.
  • May be used over wood stained with Minwax Wood Finish, or other Minwax wood stains, or applied directly to bare wood to enhance its beauty.
Check Stock

Global Door Controls Compact Commercial Door Closer in Duronotic with Adjustable Spring Tension and Backcheck - Size 5

  • Grade 1 Certified, Ansi/Bhma, Ul Listed, Aluminum Alloy Body.
  • Non Handed, Size 5 Spring Tension, Duronotic Finish.
  • Comes With Wood/Machine Screws, For All Aluminum, Wood Or Hollow Metal Commercial Applications.
  • Item Package Dimension: 1.5" L x 9.75" W x 3.0" H.
Check Stock

40-6\ x 12\ Labeled Wood Veneer Pieces (20 Square Feet) Exotic and Domestic Marquetry Arts Crafts Pack

  • ...The extra strong hot melt glue is evenly distributed on the veneer edging for a strong, permanent bond.
  • SUPER EASY INSTALLATION – to apply this veneer edge banding, simply iron on to the surface with a regular household iron at cotton temperature, hot air blower such as a hairdryer on high heat, or an edge banding machine if you have one in your toolkit.
  • PREMIUM QUALITY REAL WOOD VENEER EDGING – this red oak 2” x 50’ iron-on veneer roll is all prepared ready for your application. Finely sanded to perfection, this plywood edge banding can be trimmed if required or lightly sanded down to fit..
  • USE ON A VARIETY OF SURFACES – this roll of iron on edge banding can be stained or painted with a lacquer finish to match your project. Suitable for a wide variety of surfaces, this veneer edging is great when applied to wood, plywood, particle board, hardboard or metal.
Check Stock

Edge Supply Birch 3/4” X 250' Roll of Plywood Edge Banding – Pre-glued Real Wood Veneer Edging – Flexible Veneer Edging – Easy Application Iron-on Edge Banding for Furniture Restoration – Made in USA

  • ...The extra strong hot melt glue is evenly distributed on the veneer edging for a strong, permanent bond.
  • SUPER EASY INSTALLATION – to apply this veneer edge banding, simply iron on to the surface with a regular household iron at cotton temperature, hot air blower such as a hairdryer on high heat, or an edge banding machine if you have one in your toolkit.
  • SUPER EASY INSTALLATION – to apply this veneer edge banding, simply iron on to the surface with a regular household iron at cotton temperature, hot air blower such as a hairdryer on high heat, or an edge banding machine if you have one in your toolkit PREMIUM QUALITY REAL WOOD VENEER EDGING – this birch 3/4” x 250’ iron-on veneer roll is all prepared ready for your application. Finely sanded to perfection, this plywood edge banding can be trimmed if required or lightly sanded down to fit..
  • USE ON A VARIETY OF SURFACES – this roll of iron on edge banding can be stained or painted with a lacquer finish to match your project. Suitable for a wide variety of surfaces, this veneer edging is great when applied to wood, plywood, particle board, hardboard or metal.
Check Stock

2PCS 20Inch Black Continuous & Piano Hinges, Heavy Duty Stainless Steel Piano Hinge with Hole, 0.05\ Thickness/1.2\ Open Width Folding Cabinet Door Butt Hinge

  • Soss invisible hinges for wood or metal applications.
  • With no. 53 soft wood and no. 57 hard wood pilot hole.
  • Zinc body with steel pins,minimum Door Thickness: 1-1/8 inch.
  • The SOSS Invisible hinge model #212 (And all other SOSS Invisible Hinges) are completely flush with the edge of the door and frame. The space between the door and frame when the model #212 is closed is 3/64 Inches.
Check Stock

3M White Super Polish Pad 4100, 12 in x 18 in, 20/Case

  • Used for light cleaning to help remove soil and scuff marks with minimal dulling of finish.
  • Can be used to polish wood floors, spray cleaning or dry buffing soft finishes (using a rotary machine).
  • Made of polyester fibers in an open textured non-woven construction.
  • Polishing particles are dispersed throughout and bonded to the non-woven construction with a durable adhesive.
  • For use with low-speed floor machines on many types of floors including wood.
Check Stock

Safco Products 1876BL Machine Stand/Desk with Drop Leaves, Black

  • ROLLING MACHINE STAND – Mobile, rolling workstation that allows you to expand the work surface of your office. Add printers, scanners, monitors, and any other offices to may need on the go. Includes four swivel casters, two locking..
  • DURABLE WORKSTATION - Durable furniture grade wood with stain and scratch resistant laminate finish top, modesty panel on one side. Steel frame construction with a powder coat finish made to last..
  • TWO DROp LEAVES - Two 8" drop leaves expand work surface to 36, maximizing your desktop space. Total weight capacity of desk is up to 150 lbs., allowing this desk to hold.
  • INCREASED WORK SPACE – Too much clutter on your desk? Need some extra space for that second monitor now that you’re working from home? Use this mobile machine stand to house your printer, scanner, files and other office supplies to clear space..
  • ASSEMBLY REQUIRED – Easy to assemble. Easy to use..
Check Stock