Top Wood Hole Saws

ASTP&FH 4-3/4 inch Hole Saw with Arbor Mandrel ,HSS Bi-Metal & Heavy Duty Steel Design, for Metal,Stainless Steel,Cornhole Boards,Drywall,Plastic,Brass,Aluminum,Iron and Wood（120mm）

  • ... performance. with higher hardness , higher toughness, higher cutting strength and stronger wear resistance..
  • It is made of heat treated carbon steel alloy. Heavy Duty, Durable and Rust-proof. Built tough for repeat use and handy for working on cornhole boards and plastic.Hole saws can cut 2.5 inch diameter holes in wood, plywood, plastic, drywall, soft plaster, cornhole boards and thin metals. In addition to punching cans or recessed lights, punching saws are also suitable for home projects on air ducts, speakers, ceiling lamps, etc..
  • Upgraded design with ultra sharp serrations,Increased wall thickness of hole saw improves durability and minimizes tooth loss,Drilling with sharper Positive Rake Tooth cuts material faster than other brand.more durable with longer life than other brand hole saws..
  • High-quality bi-metal band and the best cutting performance of HSS teeth combines with Non-binding clean edge design，With the non-binding clean edge design,ensures smooth and clean cutting of the hole saw blade.The spring on the drill would automatically pushes the disc out of the saw immediately after completing the hole..
  • ASTP&FH is committed to providing consumers with 100% satisfaction. Our goal is always to create perfect products for consumers Please cont....
Check Stock

Freud DHS4BITII 1/4'' HSS Pilot Bit - Quantity 5

  • One-size fits all Snap-Lock mandrel fits all Diablo hole saws from 5/8-inch to 6-inches in diameter..
  • Snap-Lock mandrel system for a quick and easy change with no down time..
  • 60mm (2-3/8 in) cutting depth for deeper holes in one pass and increased productivity..
  • These radical new hole saws provide ultimate cutting length to bore deeper holes in a single pass, tool-free plug ejection and Variable Tooth Design for faster cuts..
  • Steel plate, square tube, iron, cast iron, wood, F.R.P and other general sheet metal Note: Cannot be used for concrete, tiles and stone..
Check Stock

Luomorgo 75mm/3 inch Hole Saw, 1 1/4 inch Cutting Depth HSS Bi-Metal Hole Cutter for Wood Cornhole Boards Plastic Drywall & Metal Sheet

  • High-Performance Materials: Hole saws made of M42 high-speed steel and BI metal, with higher hardness (≥65HRC), higher toughness, higher cutting strength and stronger wear resistance..
  • Efficient & Smooth Cutting: High-quality bi-metal band and the best cutting performance of HSS teeth combines with Non-binding clean edge design ensures smooth and clean cutting of the hole saw blade..
  • Widely Used: Hole saws can cut 3 inch diameter holes in wood, plywood, plastic, drywall, soft plaster, cornhole boards and thin metals. In addition to punching cans or recessed lights, punching saws are also suitable for home projects on air ducts, speakers, ceiling lamps, etc..
  • Warm Prompt: Keep the drill bit in contact with the cutting surface straight at a low speed. Take some time for the saw to cut, so you can get a smooth and clean round cut.
  • 100% Risk-Free Shopping: If you are not satisfied with any Luomorgo products, we have nothing to ask and let you enjoy a full refund. Because we want our customers to enjoy a 100% satisfied shopping experience..
Check Stock

Luomorgo 100mm/4" Hole Saw, 1.4 inch Cutting Depth HSS Bi-Metal Hole Cutter for Wood Cornhole Boards Plastic Drywall & Metal Sheet

  • High-Performance Materials: Hole saws made of M42 high-speed steel and BI metal, with higher hardness (≥65HRC), higher toughness, higher cutting strength and stronger wear resistance..
  • Efficient & Smooth Cutting: High-quality bi-metal band and the best cutting performance of HSS teeth combines with Non-binding clean edge design ensures smooth and clean cutting of the hole saw blade..
  • Widely Used: Hole saws can cut 4 inch diameter holes in wood, plywood, plastic, drywall, soft plaster, cornhole boards and thin metals. In addition to punching cans or recessed lights, punching saws are also suitable for home projects on air ducts, speakers, ceiling lamps, etc..
  • Warm Prompt: Keep the drill bit in contact with the cutting surface straight at a low speed. Take some time for the saw to cut, so you can get a smooth and clean round cut.
  • Risk-Free Shopping: If you are not satisfied with any Luomorgo products, we have nothing to ask and let you enjoy a full refund. Because we want our customers to enjoy a satisfied shopping experience..
Check Stock

Hole Saw 4” (102mm) for Wood, HSS Bi-Metal Hole Cutter with Pilot Drill Bit for Plywood, Cornhole, Ceiling and Drywall

  • ...rbide technology and optimized tooth geometry allow our hole saw to provide faster and accurate cutting than standard hole saws, the diameter errors of the cut hole are less than a millimeter..
  • ⚙️【MORE EFFICIENCY】The slug holes around the saw are able to remove the wood chips while cutting, reduce friction heat, improve the efficiency. And the due to the fact that less of total amount of material is actually cut, much less power is required, longer battery life of power tools is benefited..
  • ⚙️【TRUST to PURCHASE】 60 days free return and replace service to make sure our customers'satisfaction with every purchase. If you have met problems like "missing parts", please be free to contacts us, we will reply you in 6 hours to solve this..
Check Stock

MORETOPGOOD Hole Saw Set, 25PCS Bi-Metal Hole Saw Kit with 1-3/4\ to 1-1/2\ Saw Blades with 10 Hole Saws, for Engineered Wood, PVC Board, Plastic, Plywood for Home Hole Saw Set, Drill Bits

  • Complete Hole Saw Set: Includes 10 hole saws: 3/4″, 7/8″, 1-1/8″, 1-3/8″, 1-1/2″, 1-3/4″, 2″, 2-1/8″, 2-1/4″, 2-1/2″ for different needs, 10 x spare pilot drills for replacement, 1 x large mandrel, 1 x small mandrel with medium adapter and 1 x plastic case for easy storage, 1 x hex key.
  • Professional Quality - Hole saw kit is made of high-speed steel (HSS) Bi-Metal for rust-proof and wear-resistant, 2mm thickness, much more durable for longer life.
  • Precision drilling-Optimized sharp uniform tooth profile design, center positioning, and precise drilling. The hole knife can easily penetrate metal and wood, prevent slippage, and is easy to remove chips, providing you with clean, fast and high-precision cutting.
  • Suitable for a Variety of Materials-very suitable for drilling holes in metal, wood, PVC board, plastic board, drywall, and gypsum board. Widely applicable to most drilling rigs.
  • MORETOPGOOD's Guarantee - We're aimed to provide you superb quality tools, If you have any issues with our hole saws set, feel free to contact us for troubleshooting help, parts, replacement, or refund.
Check Stock

DEWALT DW1803 Heavy Duty 7/16-Inch Shank Quick Change Mandrel (Fits Hole Saws 1-1/4-Inch - 6-Inch)

  • DW1810 offers tool-free quick-release collar to prevent hole saws from locking to the mandrel.
  • DW1803 and DW1805 offer spring-loaded collar that automatically engages drive pins to prevent hole saws from locking to the mandrel.
  • All quick change mandrels feature double set screws with a recessed combination head for quick and easy centering bit changes.
  • All quick change mandrels utillize hardened steel construction and have been tested through 15,000+ cycles to deliver jobsite durability.
  • DEWALT offers a full range of standard and quick change mandrels for versatility in a wide range of hole saw applications.
  • DEWALT offers a full range of standard and quick change mandrels for versatility in a wide range of hole saw applications..
Check Stock

DIABLO Bi-Metal and Carbide Tipped Hole Saw Set (9-Piece)

  • The Diablo 9-Piece Hole Saw Kit features five hole saw cups (bi-metal and carbide tipped) and Diablo's four piece SnapLock PLUS mandrel system for quick and easy hole saw cup changes for maximum job performance. This new, high performance hole saw set delivers faster cutting performance and increased productivity versus standard bi-metal and carbide-tipped hole saws. Unlike anything on the market, Diablos hole saws and SnapLock Plus mandrel system simplify the attachment process for fast and efficient hole saw mounting. These radical new hole saws provide ultimate cutting length to bore deeper holes in a single pass.
  • and tool-free plug ejection and Variable Tooth Design for faster cuts..
Check Stock

Winegard RPSK83 Replacement IDU

  • 8pc Tungsten-Carbide Grit Hole Saws Specification This Industrial Quality Hole Saws Kit Is.
  • And Accurate Holes In Many Types of Hard Materials..
  • These Saws Can Be Able To Cut/drill Through Bricks.
  • Blocks Up To 2 Thick !!! They Are Made By Machined Carbon Steel With C2 Tungsten Carbide".
  • Grit Cutting Surfaces. Features: provides Easily Through-hole Drilling fits On Most Elec.
Check Stock

Qjaiune 51mm/2\ Hole Saw BI-Metal Heavy Duty Hole Cutter for Wood Cornhole Boards Plastic Drywall Fiberboard

  • Package Include: 1 x 2" hole saw, 1 x hole saw arbor, 2 x extra center bits, 1 x Allen wrench (Includes everything you need to do it yourself).
  • High Performance Matieral: The 2in hole saw is made of HSS carbon steel & Bi-metal steel, with hardness up to 65HRC, which has superior performance and higher cutting strength than others hole saws.
  • Proessional Cutting: With the non-binding clean edge design, this hole saw cuts smooth and easy. The spring on the drill would automatically pushes the disc out of the saw immediately after completing the hole..
  • Appliaction: Hole Saw Drill Bit is designed for wood / plastic cutting, smooth and fast cutting the holes through wood, drywall, plaster, cutting a smooth and clean circle for your project such as corn hole boards, recessed lights, speakers, air ducts, etc..
  • Purchase Guarantee: Please rest assured to buy our products. If you are not satisfied with the product, we provide a 100% money back guarantee within 90 days..
Check Stock

Shop Fox W1720 Aluma-Classic Fence with Long Rails

  • Anodized aluminum clamp body for durability.
  • Steel threaded components with large brass clamp pad.
  • Adjusts on both ends from 1/2" to 6" opening.
  • L-shaped arm slides into hole of fence edge - Simply drill 3/8" hole in fence edge, insert clamp, and tighten.
  • WoodRiver is proudly made by Woodcraft, America’s leading supplier of saws, planes, power tools, hand tools, wood stain and paint, routers, sanding, wood, kits, dust collection and more. Our award winning family of brands includes WoodRiver, Highpoint, Woodcraft and Woodcraft Magazine as well as the greatest selection of woodworking books, videos, and plans..
Check Stock

WORKPRO Hole Saw Kit, 11 Piece, Bi-Metal Hole Drills, 3/4\ to 2-1/2\ High Speed Steel M42 Drill Hole Cutter with Mandrels in Hard Case for Cutting Stainless Steel, Brass, Aluminum, Steel and Wood

  • ...event warping and threading. Two pilot drills are made of premium high-speed steel for precise positioning and rapid drilling, providing a much longer life..
  • Optimized tooth design - Precision-ground tooth design makes the cutting surface more smooth and even. These saws also feature bi-metal material that cuts both wood and metal with speed and ease. Especially suitable for sheet metal cutting: the cutting depth is 0.08 ~ 0.2 inch, depends on the hardness of the metal and choice of the drill (Bench/Pistol)..
  • Fast loading mechanism - The hole saw adapts a new type of quick loading mechanism that allows fast loading without any installation of washers or nuts. The thread design keeps the hole saw more stable when cutting, which makes the cutting hole more standard..
  • Convenience - The saw features a small quick change mandrel, a large quick change mandrel, all wrapped up in a convenient carrying case, which allows you to keep all of your parts organized. Saws are marked with both Imperial and Metric measurements..
  • What you get - The set comes in a strong storage case. It contains many popular hole sizes, including 3/4”, 7/8”, 1-1/8”, 1-3/8”, 1-1/2”, 1-3/4”, 2”, 2-1/4”, 2-1/2”.
  • In addition there are a large pilot drill and a small size pil....
Check Stock