Top Wood To Metal Screws

Hession Bugle Head Phillips Drive Wood Screws Self Tapping Screw Carbon Steel Hi Low Thread Sharp Point Black Oxide 20pcs Pack (#8 x 2 inch)

  • 【High Quality Material】#8 x 2 inch. Made of Carbon Steel, commonly have a sharp point that helps penetrating the material..
  • 【Function】Self Tapping Screws are used for all sorts of material including wood, metal, hard plastic. These screws cannot drill through metal directly, it requires a pilot pole to be pre-drilled before installation. Tipped screw and bugle head for a clean finish..
  • 【Workmanship】It is not easy to deform or break for normal use, can easily penetrate the wood and plastic and ensure a secure hold, is not easy to deform and slide while using..
  • 【Wide Application】Self tapping wood screws are mainly used in metal, plastic or board articles,such as gypsum boards, wooden board, ceiling, partitions,etc. Widely used in, ship assembly, machinery, furniture, other maintenance work, DIY arts and craft..
Check Stock

#4 x 5/16'' Wood Screws, 304 Stainless Steel Small Screws, Self-Tapping Tiny Screws, Phillips Drive Countersunk Head Screws, Suitable for Indoor and Outdoor, M3x8mm, 100Pcs

  • ✔304 Stainless Steel: These M3 flat head wood screws are made of high quailty 304 stainless steel, which can work well in harsh environments such as high temperature and high humidity areas. They are not easy to rust and are durable.
  • ✔High Quality: The short wood screws with deep thread design can easily penetrate wood and man-made materials to ensure a firm grip and are not easy to deform and slide during use..
  • ✔Flat Head Screws: With the countersunk head design, these small screws can quickly grasp and enter the wood at the location of your choice and screw it in quickly and safely, providing strong fixation for all types of wood..
  • ✔Wide Range of Uses: we provide the most commonly used wood screws sizes. It is widely used in metal, wood, plastic, home decoration , office equipment, and reparing furniture, etc..
  • ✔Easy to Carry: Provide independent packaging for the screws, you can store the wood screws in the tool bag and carry it with you, which is very convenient..
Check Stock

(2) Kicker 44CWCS154 CompC 15" 2400w Subwoofers+Sealed Sub Enclosure Box

  • Package Includes: (2) KICKER 15" Single Car Audio Subwoofers. (1) RockvilIe Dual 15 2.1 cu.ft. 3/4" MDF Sealed Car Sub Enclosure Box. 20 Drywall Wood Screws (Wood screws are the type of screws.
  • the screws are actually made of metal). 20 Feet of 14 AWG Blue Speaker Wire. 4 Spade Terminals. Features: KICKER 44CWCS154 CompC 15" 1200w Single 4-Ohm Car Audio Subwoofer Sub CWCS154. Four-Ohm Voice Coil. Injection-Molded Polypropylene Cone. Perimeter Venting for Thermal Management.
  • Ribbed Polyurethane Surround. Signature Yellow Surround Stitching. High-Strength Spiralead Tinsel Leads. Stamped Steel Basket. High Temp Voice Coil. Spring-Loaded Speaker Terminals. Size: 15" (38 cm). Impedance: 4 Ohms SVC. Max Rec Amplifier Power (WATTS PEAK/RMS)*1200/600. Sensitivity: 90.3 dB 1w/1m. Frequency Response: 25Hz - 500Hz. Mounting Depth: 7" (17.7 cm). Mounting Cutout: 13-3/4" (35 cm). Min Sealed Box Vol: 2.25 cu. ft (63.7 L). Max Sealed Box Vol: 5.0 cu. ft (141.6 L).
  • Min Vented Box Vol: 3.0 cu. ft (85 L). Max Vented Box Vol: 4.0cu. ft (113.3 L). Features: RockvilIe RD15 Dual 15" Sealed Subwoofer Enclosure. Proudly Made In The USA, Using Only The Finest Quality Materials - For The Best Level of Performance From Your Subs!. 3/4" USA Heavy Duty MDF Construction. Machine pr....
Check Stock

KICKER 43CVR152 COMPVR 15" 1000 Watt Car Subwoofer+Sealed Sub Box Enclosure

  • Package Includes: (1) Kicker 15" Car Audio Subwoofer. (1) RockvilIe Single 15" Sealed Car Sub Enclosure Box 2.03 Cu Ft. 10 Drywall Wood Screws (Wood screws are the type of screws.
  • the screws are actually made of metal). 12 Feet of 14 AWG Blue Speaker Wire. 2 Spade Terminals. Features/Specifications: Kicker 43CVR152 15" 1000 Watt Dual Voice Coil 2-Ohm Car Audio Subwoofer. Power Handling: Peak :1000 watts. RMS :500 watts. Size :15". Injection molded SoloKon cone. Ribbed Santoprene Surround.
  • Perimeter Venting. Spiralead tinsel-lead technology. UniPlate system redirects heat away from motor structure. Stamped Steel Basket. Spring-loaded Push Terminals. Dual 2-Ohm high-temperature voice coils. Top-mount depth : 8-3/16". Mounting Diameter : 13-11/16". Sensitivity : 89.2dB @ 1w/1m. Frequency Response : 25-500Hz. Minimum Sealed Enclosure : 1.8 cu. ft. Maximum Sealed Enclosure : 5.2 cu. ft. Minimum Ported Enclosure : 3 cu. ft. Maximum Ported Enclosure : 5 cu. ft.
  • Subwoofer Design : Round / Circle. Main Cone Color : Dark Gray. Woofer Composition : SoloKn. Woofer Surround : Santoprene Rubber. Weather resistant - Suitable for marine use in additional to car applications. We can ship Kicker products to the 48 continental United States. Features: RockvilIe RGS15 Sin....
Check Stock

Self Tapping Screw Assortment Stainless Screws Self Drilling, 600pcs M3/M4/M5/M6 304 Sheet Metal Screws Pen Head Small Wood Screws Furniture Screws Set

  • This stainless screws self tapping are widely used on wood, sheet metal, drywall, plasterboard, plastic and so on. The self tapping screw assortment are perfect for your home improvement, carpentry work , or industrial workplace..
  • This 600pcs wood screw assortment contains 16 commonly used stainless steel self tapping screws, 310 pan head self drilling screws(M3/M4/M5 x12mm/20mm/25mm/40mm) & 290 countersunk head self tapping screws(M3/M4/M5/M6 x /20mm/25mm/40mm/50mm).
  • These 304 stainless steel self tapping screws are known for its dependable and rigid strength as well as its corrosion resistant quality. The screw thread is sharp and sturdy, Cross head keep its original form. Durability withstanding up to 550kgf..
  • There are 600pcs sheet metal screws self tapping set are perfect for home standby. The trim screw assortment will be be classified in a convenience store case which can also be used for a storage box.
  • We are a professional manufacturer of stainless steel metal screws, and have been in this business for 20 years. We offer 100% customer satisfaction guarantee for stainless steel screws. Any question please do free to contact us..
Check Stock

Qualihome #6 FINE Thread Drywall Screws with Phillips Drive #2 Bugle Head, 1 Pound, Black, Ideal Screw for Drywall Sheetrock to Metal Studs and More (#6 x 1-5/8”)

  • Qualihome Fine thread drywall screws are used when installing gypsum board to light-gauge steel studs. They have a sharp point to pierce through drywall, and a fine thread design to help grab into light-gauge steel studs. Once the screw has been driven, the bugle head allows for quick and easy countersinking..
  • Fine thread, Bugle Head, Sharp Point, Black-phosphate coated finish, #2 Phillips. Sturdy cardboard box, Phillips drive flat head, durable strong metal steel screws..
  • Ideal For attaching drywall to 20-25 gauge metal studs and more. For Interior Use only Wallboard and Multi-Purpose Wood Applications. Also Ideal to Use these screws to attach drywall or wallboard to metal or wood studs and joists without the need for predrilling..
  • Recommended by Professional Contractors, builders and DIY homeowners. Can be ideal for your home, office, or workplace.
  • The bugle head allows for quick and easy countersinking. Drywall screws also known as: Sheetrock screws, gypsum board, sheetrock, plasterboard & general purpose screws.
Check Stock

Stainless Steel Lath Screws 8 x 3/4 Sharp Point Modified Truss Head Phillips Drive Quantity 1000 Type 17 Cutting Point 305 18-8 Stainless Steel Length 3/4 0.75 in.

  • Wire-Lath Modified Truss Head Screws for Fastening metal lath to wood. IDEAL for ALL applications where a larger bearing surface is needed underneath the head. HEAD DIAMETER is 0.42 Inches. #2 Phillips Drive.
  • ATTACHES WOOD OR LIGHT GAUGE METAL - Superior penetration through a variety of woods and thin metals.
  • REDUCES WOOD SPLITTING - ELIMATES NEED FOR PRE-DRILLING - This thread cutting screw is ideal for use with wood.
  • it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling ..
  • HIGH DEGREE CORROSION RESISTANCE: Passivated and Waxed Stainless Steel Type 305 (18-8). HIGH QUALITY STAINLESS STEEL: These #8 Wood Screws are high quality grade 18-8 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today. For use in Non-Magnetic environments.
  • MODIFIED TRUSS HEAD - The rounded head top is much lower and flatter while the width of the head is wider, than pan or round screws of the same nominal size. The modified truss is basically a tru....
Check Stock

KICKER 45L7R154 15' 1800 Watt L7R Car Subwoofer+Vented Sub Box Enclosure L7R154

  • Package Includes: (1) Kicker 15″ Car Subwoofer. (1)RockvilIe 15″ Vented Kicker Solo Baric L7 S15L7 Sub Enclosure Box L5 L3. 10 Drywall Wood Screws (Wood screws are the type of screws.
  • the screws are actually made of metal). 12 Feet of 14 AWG Blue Speaker Wire. 2 Spade Terminals. What’s In The Box: (1) 15″ Subwoofer. (1) Owner’s Manual. (2) Kicker Stickers. Features: KICKER 45L7R154 15″ 1800 Watt L7R Car Subwoofer, Solo-Baric Sub 4-Ohm. RMS Power Handling: 900 Watts.
  • Peak Power Handling: 1800 Watts. Dual Four-Ohm Voice Coil. Wrap Around Gasketing. Patented Ribbed Corners. Injection-Molded SoloKon Woofer. 360-Degree Back Bracing. UniPlate Back Plate And Pole Piece. Bumped Back Plate. Thick Tinsel Leads. Large Ceramic Magnet. Steel Basket With Spoke Design. Nickel Plated Speaker Terminals. Sensitivity: 88.05 dB. Impedance: 4-Ohms. Mounting Depth: 8.38″ inches. Mounting Diameter: 13.75″ inches. Minimum Sealed Box Volume: 1.5 cubic feet.
  • Maximum Sealed Box Volume: 3.0 cubic feet. Minimum Vented Box Volume: 3.0 cubic feet. Maximum Vented Box Volume: 6.0 cubic feet. Features: RockvilIe RSVK15 Single 15″ 2.6 cu. ft. 3/4″ MDF Vented Subwoofer Enclosure Box. Specifically Designed For The 15″ Kicker Solo Baric Subwoofers. Machine precision c....
Check Stock

ZGO Floating Shelves for Wall Set of 2, Wall Mounted Storage Shelves with Metal Frame and Towel Rack for Bathroom, Kitchen, Bedroom…

  • ...ign, which can better prevent the things on the shelf from falling. The surface of the metal frame adopts the spraying powder ink process, which not only has a good-looking appearance, but also prevents rust..
  • 【Simple Installation & Easy Disassembly】: Attached accessories and installation instructions, use SHORT SCREWS to fix the metal frame to the board(no need to punch holes, use a screwdriver to install directly), and then use LONG SCREWS to fix the shelf to the wall. When disassembling, just remove the screw..
  • 【Product Specification】: The specification of the pine board is 15. 7L X 5. 7W inches, and the thickness is 0. 6 inches. Package includes 2 pine boards, 2 metal frames, 1 towel rack, 4 expansion screws, 4 long screws and 8 short screws..
Check Stock

Stainless Steel Lath Screws, 8 x 1-5/8, Sharp Point Modified Truss Head Phillips Drive (Quantity: 100) Type 17 Cutting Point 305 (18-8) Stainless Steel, Length: 1-5/8 (1.625) in.

  • Wire-Lath Modified Truss Head Screws for Fastening metal lath to wood. IDEAL for ALL applications where a larger bearing surface is needed underneath the head. HEAD DIAMETER is 0.42 Inches. #2 Phillips Drive.
  • ATTACHES WOOD OR LIGHT GAUGE METAL - Superior penetration through a variety of woods and thin metals.
  • REDUCES WOOD SPLITTING - ELIMATES NEED FOR PRE-DRILLING - This thread cutting screw is ideal for use with wood.
  • it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling ..
  • HIGH DEGREE CORROSION RESISTANCE: Passivated and Waxed Stainless Steel Type 305 (18-8). HIGH QUALITY STAINLESS STEEL: These #8 Wood Screws are high quality grade 18-8 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today. For use in Non-Magnetic environments.
  • MODIFIED TRUSS HEAD - The rounded head top is much lower and flatter while the width of the head is wider, than pan or round screws of the same nominal size. The modified truss is basically a tru....
Check Stock

Stainless Steel Lath Screws 8 x 1-1/4 Sharp Point Modified Truss Head Phillips Drive Quantity 1000 Type 17 Cutting Point 305 18-8 Stainless Steel Length 1-1/4 1.25 in.

  • Wire-Lath Modified Truss Head Screws for Fastening metal lath to wood. IDEAL for ALL applications where a larger bearing surface is needed underneath the head. HEAD DIAMETER is 0.42 Inches. #2 Phillips Drive.
  • ATTACHES WOOD OR LIGHT GAUGE METAL - Superior penetration through a variety of woods and thin metals.
  • REDUCES WOOD SPLITTING - ELIMATES NEED FOR PRE-DRILLING - This thread cutting screw is ideal for use with wood.
  • it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling ..
  • HIGH DEGREE CORROSION RESISTANCE: Passivated and Waxed Stainless Steel Type 305 (18-8). HIGH QUALITY STAINLESS STEEL: These #8 Wood Screws are high quality grade 18-8 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today. For use in Non-Magnetic environments.
  • MODIFIED TRUSS HEAD - The rounded head top is much lower and flatter while the width of the head is wider, than pan or round screws of the same nominal size. The modified truss is basically a tru....
Check Stock

ORGRIMMAR Wood Screw Phillips Flat Head Yellow Zinc Plated Chipboard Screw Wood Interior Construction Metal Screw Assortment Kit,230Pcs

  • Chipboard screws which have deep and sharp thread for cutting through wood easily and cleanly. The exceptional reliability and strength of the T.K. Excellent enables the user to rely on one product for a variety of applications..
  • Ｍade of carbon steel, countersunk flat head, yellow zinc passivated for corrosion resistance..
  • Designed for composite timbers such as hardwood, chipboard, MDF, plastic and thin sheet metal, whilst offering exceptional holding power. Full thread be used when fixing metal to wood..
  • As the name suggests, these screws can be used when doing general DIY work with chipboard and other softer types of woods.Require pilot holes in hard wood, drilled 2mm smaller than the size of screw used..
  • The set comes in storage case for easy portability so you'll always have the right screw for the job.Assorted 230 Piece Yellow Zinc Pozi Countersunk Wood Screws.
Check Stock