Top Wooden Pla Pro

OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm Yellow PLA PRO (PLA+) 3D Printer Filament Refill Bundle

  • A 3D Printer accessories combo - 1.75mm Yellow PLA PRO (PLA+) 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
  • PLA PRO Refill Filament Specs: Yellow - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Extrusion/Nozzle Temperature: 210°C - 225°C (410°F - 437°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F).
  • Use less plastic with PLA RPO Refill: PLA+ Filament is non-toxic and comes without a spool. PLA+ is less brittle than standard PLA, improving your prints' toughness and layer adherence. We also offer the Inland Reusable Spool that perfectly fits this refill! Use less plastic and use the same Spool with every new filament refill..
  • OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
  • Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways. Setup hardware: Any Raspberry Pi (Pi 3 and up for the best experience), USB power supply, USB cables, webcam feed(optional).
Check Stock

OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm True Red PLA PRO (PLA+) 3D Printer Filament Refill Bundle

  • A 3D Printer accessories combo - 1.75mm True Red PLA PRO (PLA+) 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
  • PLA PRO Refill Filament Specs: True Red - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Extrusion/Nozzle Temperature: 210°C - 225°C (410°F - 437°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F).
  • Use less plastic with PLA RPO Refill: PLA+ Filament is non-toxic and comes without a spool. PLA+ is less brittle than standard PLA, improving your prints' toughness and layer adherence. We also offer the Inland Reusable Spool that perfectly fits this refill! Use less plastic and use the same Spool with every new filament refill..
  • OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
  • Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways. Setup hardware: Any Raspberry Pi (Pi 3 and up for the best experience), USB power supply, USB cables, webcam feed(optional).
Check Stock

3D-Fuel 3D Filament High Temp Tough Pro PLA+ Midnight Black, 1.75mm, 1 kg +/- 0.02mm Tolerance, Made in USA, Easy to Print and Works with Most 3D Printer Brands

  • TOUGH AND STRONG: Tough Pro PLA+ is designed for your most demanding projects but prints smoothly and without fuss making it perfect for quick jobs. It’s an engineering-grade, tough PLA with excellent temperature resistance and strength that rivals ABS. It is 4.3x stronger than regular PLA and is annealable for extra strength..
  • UNIVERSAL COMPATIBILITY: Tough Pro PLA+ filament is compatible with most 3D printers that accept 1.75mm filament..
  • VACUUM SEALED: Each spool is vacuum packed and includes a dessicant packet to help keep your filament dry. Sometimes these vacuum seals may puncture in transit, but your filament is still perfectly good to use..
  • MADE IN THE USA: Our filament is made in the USA using US ingredients such as NatureWorks Ingeo 3D870 resin. No fillers are ever used, ensuring you are printing with the best filament..
  • TEXTURE AND FINISH: Tough Pro PLA+ has a matte/silky finish once printed. Surface finish can be affected by printing temperature, layer height, and print speed..
Check Stock

OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm Blue PLA PRO (PLA+) 3D Printer Filament Bundle

  • A 3D Printer accessories combo - 1.75mm Blue PLA PRO (PLA+) 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
  • PLA PRO Filament Specs: Blue - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Extrusion/Nozzle Temperature: 205°C - 225°C (401°F - 437°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • Why INLAND PLA PRO Filament: Designed with the highest quality and compatibility in mind, Inland PLA+ Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! Your filament will arrive completely dry and vacuum sealed with desiccant to ensure a high-quality, smooth print.
  • OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
  • Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways. Setup hardware: Any Raspberry P....
Check Stock

OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm Black PLA PRO (PLA+) 3D Printer Filament Bundle

  • A 3D Printer accessories combo - 1.75mm Black PLA PRO (PLA+) 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
  • PLA PRO Filament Specs: Black - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Extrusion/Nozzle Temperature: 205°C - 225°C (401°F - 437°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • Why INLAND PLA PRO Filament: Designed with the highest quality and compatibility in mind, Inland PLA+ Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! Your filament will arrive completely dry and vacuum sealed with desiccant to ensure a high-quality, smooth print.
  • OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
  • Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways. Setup hardware: Any Raspberry....
Check Stock

OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm Gray PLA PRO (PLA+) 3D Printer Filament Bundle

  • A 3D Printer accessories combo - 1.75mm Gray PLA PRO (PLA+) 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
  • PLA PRO Filament Specs: Gray - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Extrusion/Nozzle Temperature: 205°C - 225°C (401°F - 437°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • Why INLAND PLA PRO Filament: Designed with the highest quality and compatibility in mind, Inland PLA+ Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! Your filament will arrive completely dry and vacuum sealed with desiccant to ensure a high-quality, smooth print.
  • OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
  • Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways. Setup hardware: Any Raspberry P....
Check Stock

JAREES Clear PLA Plus(PLA+) 3D Printer Filament,Transparent PLA Pro Printing Filament 1.75mm 1kg Spool (2.2lbs), Dimensional Accuracy +/- 0.02 mm

  • 【Toughness Enhanced PLA Plus filaments 1.75】JAREES PLA Pro is up to 5 times tougher while retaining all the PLA advantages: excellent adherence, no warping, beautiful finish quality, and broad compatibility..
  • 【Good Layer Bonding 】Good layer bonding strength make parts stronger. JAREES PLA+ has better overhang properties that leave less stringing on the final print..
  • 【Vacuum Packing】Vacuum sealed to maintain a low level of moisture content. Please keep it dry and dust-free after after opening the sealed package to prevent filament from becoming brittle or jamming the nozzle..
  • 【Recommend Settings】Recommended Extrusion/Nozzle Temperature：195℃-240℃. PLA PRO filament dimensional:1.75mm,accuracy +/-0.02mm,1kg(2.2lbs)..
  • 【100% Satisfactory Service】No matter when or why you need to replace or refund we will help! Free replacement for broken vacuum package or any other quality issue..
Check Stock

OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm Dark Blue PLA PRO (PLA+) 3D Printer Filament Bundle

  • A 3D Printer accessories combo - 1.75mm Dark Blue PLA PRO (PLA+) 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
  • PLA PRO Filament Specs: Dark Blue - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Extrusion/Nozzle Temperature: 205°C - 225°C (401°F - 437°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • Why INLAND PLA PRO Filament: Designed with the highest quality and compatibility in mind, Inland PLA+ Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! Your filament will arrive completely dry and vacuum sealed with desiccant to ensure a high-quality, smooth print.
  • OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
  • Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways. Setup hardware: Any R....
Check Stock

eSUN PLAPlus Filament, Black, 1 kg

  • 1Kg net (Approximately 2.2 lbs) filament with clear Spool.
  • eSUN PLA pro 3D printer filament vacuumed sealed with desiccant. Superb layer bonding. Several times stronger than PLA.
  • Recommended extrusion/nozzle temperature 210C - 225C, about 20 celsius higher than regular PLA.
  • Spool Diameter: 8" - Spool Width: 2.50" - Spool hub hole Diameter: 2.05" - inner circle Diameter: 3.5".
Check Stock

PLA Max PLA + Bone White PLA Filament 1.75 mm 3D Printer Filament 1KG 2.2LBS 3D Printing Material Stronger Than PLA Pro PLA Plus Normal PLA Filament CC3D Ivory White Bone Color

  • New Arrival:PLA MAX Filament is made of high-quality Polylactic Acid and with reinforcement technology..
  • Have higher strength and better toughness,excellent thermal stability than ordinary PLA..
  • PLA MAX is an upgraded version of PLA Pro filament..
  • PLA Max filament is different from ordinary PLA, printing temperature is 10-15℃ higher.Especially when printing the first layer..
  • Industrial & Scientific Additive Manufacturing Products 3D Printing Supplies 3D Printing Filament.
Check Stock

MYNT3D Super 3D Pen + 10 Color PLA Filament + DesignPad Mat Kit

  • Everything you need to create like a pro: bundle complete with Super 3D Pen, PLA filament refills and mat kit.
  • Super 3D Pen: features stepless speed control for enhanced flow regulation, temperature adjustability for ABS or PLA and replaceable sealed nozzle....
  • PLA Filament Refills: Highest quality vacuum sealed PLA in colors blue, green, red, yellow, orange, pink, black, tan, brown and gold.
  • DesignPad: double sided silicone drawing surface with channels let you design and create perfect geometric shapes.
  • FreePad: custom formulated transparent drawing surface with ideal adhesion so you can trace your favorite patterns, drawings or create your own....
Check Stock

4 Spools of 3D Printlife Filament Bundle with Dremel Digilab 3D45 Award Winning 3D Printer, Idea Builder with Heated Build Plate to Print Nylon, ECO ABS, PETG, PLA at 50 Micron Resolution

  • 4 spools of 3D Printlife filament bundled with the Dremel 3D45 printer, granted the PCMag 2018 Editors' Choice Award. Equipped with a heated build plate, all-metal hot end, 4.5 inch color screen, wifi connectivity, and much more, the 3D45 is perfect for the classroom..
  • Easily removable glass build plate heated up to 100°C and all metal 0. 4mm nozzle heated up to 280°C. Windows requirement-Windows(7,8,8.1,10). MAC requirement-MAC OS X (v10.9+) 5-inch full color touch screen with intuitive icons for easy setup and operation. Go from unboxing to your first print in less than 15 minutes.
  • Fully enclosed sturdy plastic design with a 6. 7" x 10" x 6" build volume for better prints, better safety and less chance for warping. A carbon filter and particulate filter are built-in as well. Wi-Fi connectivity, built-in HD camera and included remote printing software so you can print and monitor your prints from anywhere. You can also print over a local network without internet, or via USB.
  • 4 Free spools include 3D Printlife's impact modified Pro PLA, a professional grade PLA filament upgraded and optimized for 3D printing. Pro PLA features premium PLA resin slightly modified with a revolutionary bio-based plastic that increases overall strength, impact resista....
Check Stock