Top Woodhaven Bandsaw Fence 2

BOW Products GuidePRO GP5 Bandsaw Guide - EVA Feathers the Reduce Kickback - Vertical Resaw Featherboard for Band Saw - Woodworking Safety Accessory for Greater Feed Control

  • PROFESSIONAL WOODWORKING EQUIPMENT: Vertical featherboard universally improves cutting results by holding down materials to ensure productivity on a table saw or bandsaw..
  • REVERSIBLE MAGNET TOOL: Reversible magnet for functionality on either side of the workpiece..
  • EXCELLENT GRIP: Vertical Featherboard anchors to table saws for fences to provide downward pressure as it is cut to ensure that thin material does not bend or lift off the table.
  • compressible gaskets provide excellent grip when magnets are engaged..
  • CLAMP CONFIGURATION: Configured to clamp to the center of a steel table saw fence or at any point on the steel tabletop..
Check Stock

FOXBC 59-1/2\ x 1/2\ x 14 TPI Bandsaw Blade for Wen 3959, Sears Craftsman, Porter-Cable, Ryobi, Delta, Skill 9\ Bandsaw - 2 Pack

  • 59-1/2 inch Bandsaw Blade for WEN 3959 BA3959 3959T, Sears Craftsman, Porter-Cable, B&D, Ryobi, Delta BS100, and Skill 9" Bandsaw.
  • 59-1/2" x 1/2" x 14 TPI Bandsaw Blade - 2 Pack.
  • 59-1/2 inch bandsaw blade is made from premium, high grade carbon steel with heat resistance and weld.
  • This precision cutting tool is constructed with an optimal geometric tooth arrangement that provides seamless cutting results at high performance speeds.
  • flexible carbon hard edge blade works perfectly with hard and soft woods, plastic, and plus non-ferrous metals.
  • 14TPI blade has a raker set/ Regular teeth profile.
Check Stock

FOXBC 59-1/2\ x 1/4\ x 6 TPI Bandsaw Blade for Wen 3959, Sears Craftsman, Ryobi, Delta and Skill 9\ Bandsaw - 2 Pack

  • 59 ½ inch bandsaw blade (two piece) – suitable for WEN 3959 BA3959 3959T, Sears Craftsman, Porter-Cable, B&D, Ryobi, Delta BS100, Skill 9" Bandsaw and most use 59-1/2” long band saw.
  • 59-1/2 Inch bandsaw blade is made from premium, high grade carbon steel with heat resistance and weld.
  • This precision cutting tool is constructed with an optimal geometric tooth arrangement that provides seamless cutting results at high performance speeds.
  • Flexible carbon hard edge blade works perfectly with hard and soft woods, plastic, and plus non-ferrous metals.
  • 6 tpi bandsaw blade has a racer set / regular teeth profile.
Check Stock

Powermatic PM2013B 20-Inch Woodworking Bandsaw 5HP 1Ph 230V 1791257B

  • ADDED SAFETY: Blade tension release, with electrical interlock, prevents the bandsaw from starting when the blade is de-tensioned..
  • TOOL-LESS ADJUSTMENTS: High end blade guides provide stability, increasing cut accuracy..
  • INCREASED ACCURACY: Exclusive Powermatic T-Square style Accu-Fence..
  • MAXIMUM RIGIDITY: Sturdy cast iron table and trunnion assembly offers maximum rigidity for large work pieces..
  • EASY AND ACCURATE ADJUSTMENTS: Rack and pinion table tilt system..
Check Stock

FOXBC 62\ BandSaw Blades, 62\ x 3/8\ x 4 TPI - 2 Pack

  • 62" x 3/8" x 4 TPI BandSaw Blades for Wood - 2 Pack.
  • 62" BandSaw Blades for Craftsman, POWERTEC, Ryobi, Wen, Skil 9" Bandsaw.
Check Stock

Powermatic PM1500 15-Inch Woodworking Bandsaw 3HP 1PH 230V 1791500

  • SMOOTH OPERATION: Heavy-duty upper wheel support and tracking mechanism..
  • TOOLLESS ADJUSTMENTS: High end blade guides with tool less adjustment provide stability and increased cut accuracy..
  • VERSATILE FENCE: Oversized side plate can be used in the horizontal or vertical position..
  • SOLID MOMENTUM: Solid cast iron upper and lower wheels create the momentum needed for heavy resaw..
  • ADDED SAFETY: Blade tension release with electrical interlock prevents the bandsaw from starting when the blade is de-tensioned or released..
Check Stock

Woodskil 3A 9-Inch Band Saw,2500FPM & 1720RPM Low Noise Induction Motor Bandsaw Anti-Shake with Steel Base and Cast Aluminum Table,Removable Safety Key,Benchtop Band Saw with Fence and Miter Gauge.

  • ...FPM blade speed and 1720RPM motor speed. The band saw adopts heat dissipation system to extend the service life. You don't have to worry about cutting back and forth due to low power, and the cutting surface is neat. It can slow down the vibration more than the ordinary band saw..
  • Sharp and Quick - The blade size of bandsaw is length: 59-1/2 inches, width: 1/8 ~ 3/8 inches. The maximum cutting depth is 3-1/2 inches, and the maximum cutting width is 9 inches.With strong and sharp blade and powerful 3A induction motor, band saw can cut different types of wood and soft metal accurately and quickly at the speed of 1720RPM..
  • Accurate and Multi Angle - Band Saws for Wood has a sturdy cast aluminum table tilting from 0°to 45°with 120°miter gauge. Rip fence for straight, accurate cuts. Band saw can cut straight line, curve and multi angle, which is an ideal choice for woodworking. Bandsaw for woodworking table size: 12-5/16" x 11-7/8"..
  • Safe and Stable - Double safety switch forms a double security protection. Removing the safety lock when not in use ensures safety. Sturdy steel base to prevent any heavy vibration. 2-1/2" dust exhaust port and dust brush of saw wheel make your jobsite cleaner, reduce dust inhalation, and extend the service life of the band s....
Check Stock

FOXBC 70-1/2\ x 1/2\ x 3 TPI Bandsaw Blade for Sear Craftsman , Rikon 10\ Bandsaw - 2 Pack

  • 70 ½ inch bandsaw blade (two piece) – suitable for Rikon 10-305 10-3061, Sears Craftsman 21400 10" Bandsaw and most 70-1/2” long, 1/2” wide, 0. 025” thick, band saw blades.
  • 70-1/2" Bandsaw blade is made from premium, high grade carbon steel with heat resistance and weld.
  • This precision cutting tool is constructed with an optimal geometric tooth arrangement that provides seamless cutting results at high performance speeds.
  • APPLICATION: Flexible carbon hard edge blade works perfectly with hard and soft woods, plastic, and plus non-ferrous metals.
  • TEETH SPECS: 3 tpi blade has a racer set / regular teeth profile.
Check Stock

Magswitch Dual Roller Guide Attachment for Magswitch Workholding System

  • -The Magswitch Dual Roller Guide is the ultimate third hand when you are doing the most difficult and dangerous woodworking projects on a bandsaw or general infeed outfeed support on tables and fences..
  • -SUPPORT: The dual roller guide helps support a tall panel or hold down a long piece of wood and steady your resaw projects..
  • -FEATURES: A dual set of roller bearings provide firm yet smooth glide of wood through a saw blade and micro adjustment for fine tuning to 90 degrees..
  • -EASY SET UP: The dual roller's low profile design allows for fast, strong set up anywhere on a steel table or cast iron fence, even on the smallest table..
  • -INCLUDES: Dual roller guide and all required attachment hardware..
  • Features a dual set of roller bearings for firm yet smooth glide of wood through a blade..
  • Includes micro adjustment for fine tuning to 90 degrees..
  • Ideal for re-sawing on band saws, a second hand to hold raised/long or tall panels against a fence on table saws, general in-feed out-feed support on tables or fences..
  • Built from strong and durable ABS UL94VO material for years of use..
Check Stock

2 Pack Urethane Band Saw Tires - No Adhesive Needed - Fit 9 x 1/2 x .095 for Branded Bandsaws including Powermatic Jet Grizzly Craftsman etc

  • 【Urethane Bandsaw Tires 】Urethane Bandsaw Tires 9" x 1/2" x .095", They can be installed on any 9" band saw that requires a 1/2" wide and 3/32"....
  • 【9" Bandsaw Tires】9" x 1/2" Tire fit the following machines: Delta:28-150, BS100, SM400. Craftsman: 137.21409, 137.214130, 113.24458, 315.214770,....
  • 【High-Quality】: The upgraded belt is made of polyurethane material, which does not dry and rot like other types of tires compared to plastic or....
  • 【Installation And Removal】:No adhesive required. Easy to install and remove, we recommend soaking the band saw tires in hot water before....
  • 【Compatibility】 This is a flat tire. Any other brand names and part numbers mentioned are only to illustrate compatibility and suitability. - For....
Check Stock

FOXBC 59-1/2\ x 1/8\ x 14 TPI Bandsaw Blade for Wen 3959, Sears Craftsman, B&D, Ryobi, Delta, and Skill 9\ Bandsaw - 2 Pack

  • 59 ½ inch band saw blade (two piece) – suitable for WEN 3959 BA3959 3959T, Sears Craftsman, Porter-Cable, B&D, Ryobi, Delta BS100, Skill 9" Bandsaw and most use 59-1/2” long, 1/8” wide, 0. 014” thick, band saw blades.
  • 59-1/2 inch bandsaw blade is made from premium, high grade carbon steel with heat resistance and weld.
  • This precision cutting tool is constructed with an optimal geometric tooth arrangement that provides seamless cutting results at high performance speeds.
  • Flexible carbon hard edge blade works perfectly with hard and soft woods, plastic, and plus non-ferrous metals.
  • 14tpi bandsaw blade has a racer set / regular teeth profile.
Check Stock

POWERTEC BS900V 9 Inch Benchtop Bandsaw

  • Restore Quick Cuts With Your Benchtop Bandsaw.
  • Perfect Fit Blade For The Eastwood Benchtop Metal Cutting Bandsaw.
  • Cut Quickly And Easily Through Steel And Aluminum.
  • Blade Measures 52 in. Long, 1/2 in. Wide With 12-14 Teeth Per Inch.
Check Stock