Top Woodworking Angle Finder

Digital Angle Finder,3in1 Auzof Cube Inclinometer Protractor with Backlight, Woodworking Measuring Tool-4-side Strong Magnetic Angle Gauge,Electronic Level, Measures & Sets Angles, Laser Class II

  • 【The choice of craft lovers】Not only the baseboard, but also the strong magnetic upgrade at the four sides. Never slide on the table saw blade or any metal surface. Magnetic feature and lasers are great advantages for measuring, cutting, leveling in woodworking renovations and building furniture..
  • 【Small size & portable】L2.4in, W2.4in, H1.2in, portable pocket size,Save time and effort hanging decorations. Dual lasers are great helper for horizontal and symmetrical installation. Laser Power:.
  • 【Rechargeable/dustproof/waterproof】This inclinometer, digital angle finder comes complete with a USB-C charging cable for the internal 340mAH rechargeable battery. It also has dust-proof and IP67 waterproof performance with bright backlight. Even in garage, with the door open and the sunshine pouring in, you can easily read the display..
  • 【Wide Applications】This magnetic laser digital angle gauge can help you do simple tasks in many measurement environments, such as leveling pictures on a wall, and more complicated jobs, such as dealing with landscape gutt....
Check Stock

Stainless Steel t Square, Incra T Rule, Edge Ruler Woodworking, Compass and Protractor Set, Multi-Function Angle Measure Tool with Wall Hanging Storage Rack(18-INCH)

  • FUNCTION:woodworking protractors & ruler is a multifunctional device for length measurement and angle drawing. It can measure lengths and draw parallel lines at different angles and intervals easily, which will bring much convenience to your work.
  • PRECISION：The ruler tool can be adjusted from 0° to 70°, every 5° (plus 22-1/ 2°, 67-1/ 2°) has a steel ball to lock the angle firmly during the painting lines.
  • Any angle can be obtained by moving and rotating the ruler. The ruler has a total length of 18in, and the smallest scale is accurate to 1/32in. There are 144 serrated notches and 18 circular holes, The spacing of the serrations is 11/112in (approximately equal to 2.49 mm) and that of the round holes is 1in.
  • MATERIAL：The dial of this adjustable woodworkers edge rule is made of hard plastic, both the angle finder and ruler body are made of stainless steel, which is moisture-proof, rust-proof and corrosion-resistant. The laser scale is clear and precise, does not fade, and effectively extends its service life.
  • T-SHAPED DESIGN: this angle measure tool is designed with t-shape, a series of precision-machined index ....
Check Stock

GemRed 82305 Digital Angle Finder Protractor Stainless Steel 7inch/200mm Black Button

  • 【Patented measuring technology】Ruler and protractor combination for easy measuring inside and outside angles. 【Digital Display】Easy to read..
  • 【Durable Rulers】Well-made stainless steel rulers and laser etched measurements offer clear reading and years' usage..
  • 【High Accuracy】Accuracy of this protractor is ±0.3 degree. It is a good choice for most projects like woodworking, crown molding and daily use. Folded length: about 7.5 inch/220mm.Total length 400mm..
  • 【Locking Function】For read it easily, GemRed angle finder could be locked at any angle. *NO REVERSE ANGLE/DISPLAY FUNCTION..
  • 【Battery】CR2032 battery. Package contains battery..
Check Stock

Bosch GTL3 65ft Square Laser Level for Tile and Square Layout

  • MULTI-FUNCTION: MUSIBO woodworking protractors & ruler is a multifunctional device for length measurement and angle drawing. It can measure lengths and draw parallel lines at different angles and intervals easily, which will bring much convenience to your work. Each woodworking ruler is equipped with a wall-mounted storage rack, which make it easy to store. MUSIBO woodworking protractors & ruler is an indispensable tool for every woodworkers and mechanics.
  • HIGH PRECISION: The ruler tool can be adjusted from 0° to 70°, every 5° (plus 22-1/ 2°, 67-1/ 2°) has a steel ball to lock the angle firmly during the painting lines.
  • Any angle can be obtained by moving and rotating the ruler. The ruler has a total length of 13in, and the smallest scale is accurate to 1/32in. There are 104 serrated notches and 13 circular holes, The spacing of the serrations is 11/112in (approximately equal to 2.49 mm) and that of the round holes is 1in.
  • SIMPLE OPERATION: You can make the cross surface of the disc next to the edge of the board, then turn the ruler to get the angle you want. Adjust the nut to get the best feel. Place the tip of the pencil in the saw tooth notch and then move the ruler along the edge of the board to get different parallel lines. In short, you can ....
Check Stock

GemRed Digital Level and Protractor, 2 in 1 Digital Angle Finder LCD Display, 10inch/270mm/360°Angle Gauge for Woodworking/Carpenter/Construction/DIY Tools (Black)

  • ...roduction needs. Conversion between absolute measurement and relative measurement. Absolute measurement mode and relative measurement mode can switch freely according to demand.
  • 【2 in 1 & Easy Used】 The Angle Finder both measure the angle and level. Calculating quickly and accurately, it’s your good partner in woodworking, construction, mechanical work and life. ☆Easy to measure all kinds of angle and draw lines.Easy calibration and Zero setting. ☆V-notch end for checking 90° degree quickly..
  • 【Practical LCD Display】 ☆Backlit LCD Display:Large LCD display with backlight, means that you can read clearly even in a dim environment. ☆Analogue quadrant showing ☆Display always reads upright: no matter which way it is turned..
  • 【Locking & Holding Function】 ☆Locking Function: Good locking function could lock the measurement at any angle. ☆Holding Function:Display has a hold function to freeze movement for accuracy.If you want to use data holding function, you need to press the HOLD button rather than twist the knob..
  • 【Durable & widely use】 This angle measure tool is made of durable aluminum and has been used for many years. The angle gauge is portable and convenient, it can be used in woodworking, welding, fabrication, construction....
Check Stock

PREXISO Angle Gauge Magnetic, Angle Finder - Digital Level Electronic, Protractor Angle Cube Inclinometer for Woodworking, Table Saw, Construction, Masonry, Machinery, 0-360° Bright Backlit Display

  • ...n function, so that it can be calibrated by yourselfe. Please refer to the user manual for details of calibration method.
  • PREXISO digital level angle gauge for daily home repairs tasks like leveling pictures on a wall, working with landscape drains, gutters, or measuring pinion angles on a car.
  • This tool is used for woodworking, plumbing, construction, machinery, telecommunications, automotive and more.
Check Stock

ZX-1 Center Scriber Woodworking Scriber Center Line Marking Tool Easy to Find the Exact Center and Offset Lines Red

  • 【Material】This measuring tool is made of high-quality aluminum alloy material, with high hardness, wear resistance and durability. And it is small....
  • 【Good for Woodworing】The center finder scribe woodworking accessory is a perfect woodworking marking tool that can be firmly fixed on the wooden....
  • 【Small】Simple and fast, and it can mark soft metals and woods, which is very suitable for finding the precise center. Can be widely used in....
  • 【Use Range】The length Approx 120mm, and the center point can be found accurately under the length of 95mm..
  • 【Excellent Masurement】Accurate scale, accurate angle measurement. It is very suitable for woodworkers to find the precise center at work, improve....
Check Stock

MUSIBO Protractor Angle Finder, Woodworkers Edge Ruler, T Square, T Ruler, Straight Edge inch Ruler,Multi-Function Angle Measure Tool Woodworking Metal Ruler Kit with Wall Hanging Storage Rack(13in)

  • MULTI-FUNCTION: MUSIBO woodworking protractors & ruler is a multifunctional device for length measurement and angle drawing. It can measure lengths and draw parallel lines at different angles and intervals easily, which will bring much convenience to your work. Each woodworking ruler is equipped with a wall-mounted storage rack, which make it easy to store. MUSIBO woodworking protractors & ruler is an indispensable tool for every woodworkers and mechanics.
  • HIGH PRECISION: The ruler tool can be adjusted from 0° to 70°, every 5° (plus 22-1/ 2°, 67-1/ 2°) has a steel ball to lock the angle firmly during the painting lines.
  • Any angle can be obtained by moving and rotating the ruler. The ruler has a total length of 13in, and the smallest scale is accurate to 1/32in. There are 104 serrated notches and 13 circular holes, The spacing of the serrations is 11/112in (approximately equal to 2.49 mm) and that of the round holes is 1in.
  • SIMPLE OPERATION: You can make the cross surface of the disc next to the edge of the board, then turn the ruler to get the angle you want. Adjust the nut to get the best feel. Place the tip of the pencil in the saw tooth notch and then move the ruler along the edge of the board to get different parallel lines. In short, you can ....
Check Stock

BOSCH 5-in-1 Digital Angle Finder and Inclinometer GAM 270 MFL

  • VERSATILITY: The Bosch GAM 270 MFL provides five tools in one including a digital angle finder, an inclinometer, a miter calculator, a protractor and level..
  • MEMORY: This angle finder provides angle memory, to provide the same angle and inclinometer measurements in different areas of the jobsite..
  • DISPLAY: Easy-to-read illuminated, rotating flip display for the inclinometer and angle finder. The miter cut calculation has an input measurement from 0-270 degrees...
  • DURABLE: Features robust housing with IP54 protection, making the angle finder water and dust resistant..
  • COMPLETE: The Bosch GAM 270 MFL includes a 5-in-1 digital angle finder, 24 in. leg extension, hard thermoformed case, 4 AA 1.5V batteries..
Check Stock

Oumefar Aluminium Alloy Miter Bar Slider Table Saw Tie Rod Gauge Rod General Guide Rail Slide Table Saw Accessories Woodworking Tool Durable in Use(450 Slider)

  • Wide Application: Miter saw protractor #505P-7 replacement widely use in woodworking, plumbers, and all building trades..
  • Laser Dial:Laser carving dial, accurate and clearly Dial, easy to read, use velvet bag packaging, well protect the dial..
  • 7.3 Inch Miter saw protractor, you can put it in the bag or pocket, easy to carry..
  • 360-Degree Measurement:360 - degree rotation can measure different angles.Inside & Outside miter angle finder..
  • Simple Operation: Direct read, setting the cut saw angle.But It's not an instrument that measures the angle of bending, it just helps you cut some standard angles..
Check Stock

BOSCH 4-in-1 Digital Angle Finder GAM 220 MF

  • VERSATILITY: The Bosch GAM 220 MF provides four tools in one including an angle finder, miter calculator, protractor and level..
  • MEMORY: This angle finder provides angle memory, to provide the same angle measurement in different areas of the jobsite..
  • DISPLAY: Easy-to-read illuminated, rotating flip display. The miter cut calculation has an input measurement from 0-220 degrees.
  • DURABLE: Features robust housing with IP54 protection, making the angle finder water and dust resistant..
  • COMPELTE: The Bosch GAM 220 MF includes a 4-in-1 digital angle finder, 16 in. leg extension, hard thermoformed case, 4 AA 1.5V batteries..
Check Stock

4 Inch Marking Center Finder Stainless Steel Center Scriber Marking Centerline Tool Woodworking Center Gauge Line Scriber Center Finder Ruler for Woodworker Carpenter

  • Use tip: it is recommended to use this center finder in conjunction with a 2B pencil, which is very suitable for determining the precise center of the....
  • Size detail: the steel scribe tool is measured about 5.7 x 0.2 x 0.07 inch, small and compact design is very suitable for finding the center of the....
  • Material: the center finder tool is made of stainless steel, which is sturdy, reliable, labor-saving, with high measurement accuracy, easy to operate,....
  • Designed for woodworking: woodworking center gauge slides very smoothly and protects your working fingers from burrs, suitable for woodworking work.
  • Apply to: the center marking tool can be applied to mark the center of a board whose thickness or width does not exceed 4 inch.
Check Stock