Top Working Center

SLIK tripod sprint MINI II GM N 4-stage travel tripod 106 556

SIRUI AM223 Travel Carbon Fiber Mini Tripod with SL-100 Two-Section Carbon Center Column

• Durable Carbon Fiber: Manufactured with premium carbon fiber, SIRUI AM-223 tripod kit is lightweight, sturdy and durable, and can support up to a 15kg/33.1lbs load..
• Compact&Portable Tripod: The SIRUI AM-223 tripod kit is retractable and foldable, thus it can perfectly fit into photographers’ carrying bag without occupying too much space..
• Detachable Center Column: SIRUI SL-100 carbon column can be either connected to tripod for extra height when it’s necessary or detached in seconds for lighter weight..
• Wide Compatibility: Both AM-223 tripod and SL-100 column are equipped with convertible 1/4” and 3/8” screws, which makes it compatible with various photographic devices..
• Flexible Working Height: With the detachable SL-100 center column and extendable legs, the working height can be adjusted from 58mm/2.3” to 350mm/13.8”+310mm/12.2”. Suitable for both indoor and outdoor photography..

TCMT Rear Air Ride Suspension & Electric Center Stand Fit For Harley Touring Road King Road Glide Street Glide Electra Glide 2009-2016

• Center Stand: Color:Black(As pictures shown).
• Air Ride Kit: Waterproof,dust-proof (IP)：IP54.
• Maximum Working Voltage：130PSI(9.1KG/c㎡).
• Pump's Size(L×W×H)：152mm × 88.5mm × 135mm.
• The Ventilating Flux: [email protected], When under 0PSI, the rate of flow is approx. 36.0L/MIN.(Calculation formula: 1CFM=28.3185 L/MIN).
• Fully Collapsed approx. 9.64inches(24.5cm).
• Fits For Harley Touring Models 2009-2016 ( CAN NOT Fit With The Cross-Under Exhaust Pipes. ).
• Package Included: 1x Air Ride Suspension.

SIRUI Carbon Fiber Travel 5C Tripod 54.3 inches Lightweight Portable Camera Tripod with Ball Head and Arca Swiss Plate Load Capacity Up to 4kg

• Solid Construction: High quality carbon fiber camera tripod, construction for maximum lightness and sturdiness. Center column with hook for hanging goods to increase stability. Max. loading Capacity: 8.8lbs/4kg. Tripod weighs only 1.87lbs/0.85kg..
• Adjustable and Extendable: 5-section carbon fiber legs with quick release twist-locks allow you to adjust the working height from 6.3" to 54.3" in seconds, while with a folded height of 13". 3-position leg angle adjustment system can provide flexible shooting for different photography scenarios and conditions..
• Aluminum Ball-Head: With two independent control knobs, the ball-head can rotate smoothly and tilt vertically to take panoramic and portrait shots. A quick release plate with standard 1/4" screw is equipped for a fast camera connection..
• Multi-angle Shooting: The center column inverted function ensures extreme low angle photography and macro shooting. When the center column attached to the tripod, twist the column lock to adjust the column for additional working heights..
• Easy to carry: Light-weight but durable, the portable tripod legs can be inverted and folded back 180 degrees, saving length to 13" compact storage size, also comes with a portable bag, which is easy to carry and pack for travel..

Sonicake Tiny Sonic Looper Guitar Effect Pedal 10 Minutes of Looping

• Easy-to-Use One Button Looper with Loop Volume Control.
• Big LED indicates Working Status by Green and Red Colors.
• Working with 9V Center Negative Regular Pedal Power Supply(not included).

WHLLING 2-Piece Automatic Center Punch 6 Inch Hardened Steel Spring Loaded Center Hole Punch with Adjustable Knurled Cap for Machinists and Carpenters

• ➤Hardened All-steel Construction: Our automatic center punch is made of hardened steel and 6150cr-v steel tip, after special heat treatment. Knurled....
• ➤No Hammer Needed: One-handed spring impact operation, activated by downward pressure, requires no bulky or blunt objects to be swung, working in....
• ➤Adjustable Tension: This spring-loaded center punch is adjustable for light to heavy punch marks. You can adjust the best tension applied to your....
• ➤Wide Application: The Automatic Center Punch can punch, mark, scribe and start drill, nail or screw holes. Used for centering projects for wood,....
• ➤Package Including: 2Pcs automatic center punch, Overall Dimensions Measure 6" x ½-Diameter Shank. If there any questions, please do not hesitate....

SIRUI ST-124+VA-5 Carbon Fiber Tripod with Fluid Video Head Triangular Centre Column Waterproof Travel Tripod for Cameras 4 Sections 62.2inch Load 6.61lbs

• “Tri” to Challenge—Innovative Triangular Column: The ST tripod includes a triangular carbon-fiber center column that successfully challenged the classic round shape. This unique triangle shaped center column allows for a more compact design as well as a sturdier center section..
• Waterproof Leg Locks: Manufactured with waterproof structure and material, the locking mechanism seals the legs completely to prevent water, dust and small particles from entering the legs when shooting in tough environment..
• Born for Mirrorless Cameras: ST series tripods are especially designed for mirrorless cameras with tailored large leg diameter of 26.5mm/1.04inch and compact size..
• Non-slip Retractable Spikes: Rubber tripod legs with retractable spikes are designed to enhance the stability and can adapt to various shooting environment..
• Convertible Center Column for Different Working Height: With a reversible center column, the height of the ST series tripod is flexible to meet different shooting needs..

7 Pieces Center Drill Bits Set M2 High Speed Steel 60-Degree Angle Center Drill Bits Kit Countersink Tools for Lathe Metalworking Size 1.0 1.5 2.0 2.5 3.0 4.0 5.0

• Wide Range of Sizes: Including 7 Pieces of Plain Center Drill Bits Set range in size 1.0 1.5 2.0 2.5 3.0 4.0 5.0 to meet different needs.
• Accurate: A 60-Degree Angle center drill is very useful in drilling accurate center holes, 60-degree countersink holes or starter holes for bigger drill bits in metal-working.
• High Quality: Our center drill bits made of high quality M2 High speed steel, solid and high temperature wear resistant.
• Widely Applicable: work with lathe machines and most electronic drills to drill holes in Steel, Iron, Alum, Carbon Steel, Brass and other tough material ranging from 170HB up to 200HB.
• Worry Free: This Center Drill Bits set comes with a portable storage case for convenient use and store. If you encounter any problems with the products, please feel free to contact us.

Linn and Enrique (A Windows Lap Top and Two Ottoman Chairs)

• ✅The best mount setting for video gaming or working for long hours saving you from back pain.
• ✅it can turn your comfortable chair into the most efficient workstation or entertainment center for video gaming or watching movie or working on any laptop/IPAD/IPAD PRO/Tablets.
• ✅The item can be mounted to the gas cylinder or column( upto 1.96 inch diagonal thickness) of your chair to hold your laptop/keyboard/mouse in most comfortable position or angle for you..
• ✅Get The Most Healthy and Cozy Position in Your Chair for Working or Gaming or Watching Movie.
• ✅ Mouse pad tray attaches to the armrest of your chair.

Ergonomic Laptop Keyboard Mouse Chair Stand Mount Holder Installed to Chair

• ✅The best mount setting for video gaming or working for long hours saving you from back pain.
• ✅it can turn your comfortable chair into the most efficient workstation or entertainment center for video gaming or watching movie or working on any laptop/IPAD/IPAD PRO/Tablets.
• ✅The item can be mounted to the gas cylinder or column( upto 1.96 inch diagonal thickness) of your chair to hold your laptop/keyboard/mouse in most comfortable position or angle for you..
• ✅Get The Most Healthy and Cozy Position in Your Chair for Working or Gaming or Watching Movie.
• ✅ Mouse pad attached to keyboard tray and it tilt separately for best adjustment.

Apexstone 80N/18lb 7 Inch Gas Strut 80N Gas Strut 7 Inch Gas Strut Cabinet 80N Gas Spring Gas Shocks Lift Supports Lid Stay, Set of 2

• Lids soft open gently, Ideal for supporting the lid to keep it open.
• Force: 18 Lbs(Per Strut), Length (Center-to-Center): 6.89 inch(175 mm), Compressed Length (Center-to-Center): 4.73 inch(120 mm).
• Support opens lids to a maximum angle of 90 degrees. Available working temperature: -10℃~50℃/14℉-122℉.
• Instructions Included, Screws Included. As the installation, just install it as the image shown in the description or the instructions in the package, While if you still have problem, please kindly Click "Ask Seller" Besides Your Order for In-time Assistance.
• We offer 1 YEAR 100% SATISFACTORY WARRANTY, if unfortunately our SOFT OPEN LID GAS STRUT did not work well, please kindly contact us for exchange, refund or return.

Hegebeck Combined Center Drills Bit Countersinks Plain Type 1/8 Inch Dia Shank High Speed Steel HSS 6542 Silver 5 Pcs

• 【MATERIAL】-This combined center drills was made by High Speed Steel 6542,which is solid and high temperature wear resistant，not easy to break.
• 【ADVANTAGE】-Used to make a conical hole for a lathe center in order to make a starting point for a standard twist drill, designed to prevent the twist drill from walking..
• 【FEATURE】-Drill accurate center holes in material prior to turning, or use as a starter bit for accurate holes..
• 【APPLICATIONS】- Work with lathe machines and most electronic drills to drill holes in steel, iron, alum, carbon steel, brass,etc.