Top Worx Wx255l Sd Cordless Screw Drivers

Outer Inner Flange Lock Blade Bolt for Rockwell Worx 4-1/2' Compact Saw RK3441K WX439L WX531L WX420L 4.5' Saw (up grade version)

  • Kit included :Outer Flange, Inner Flange, Hex Key and 2 different size of locking screw.
  • Kit Designed for the Rockwell / Worx 4.5" Saw/ Porter Cable 4.5"/ Tacklife 4.5" compact saw.
  • IT NOT for Rockwell 3-3/8" Versacut saw RK3440K RK3551. WORX WX420L (the locking screw is good but the outer flange is not fit).
  • This is aftermarket kit , but fully compatible.
Check Stock

WONDER MASTER Cordless Screwdriver, 3.6V Electric Screwdriver Rechargeable Battery with Screw Bits Set Power Screw Gun Forward/reverse Switch for Home DIY Furniture Installation Drill

  • [HOLDS A CHARGE FOR MONTHS] Up to 18 months, as a matter of fact. The efficient 4v MaxLithium battery gives you the driving power you need, and will still have a charge the next time, even if that’s months from now.
  • [SCREW HOLDER] This innovative attachment keeps the screw in place so you can use the SD Cordless Screwdriver with just one hand.
  • [NEVER LOSE A BIT] Store bits in the internal Rapid Reloadable Cartridge. No more fumbling in your pockets or watching a bit fall through a floorboard.
  • [DO IT YOURSELF. DO IT BETTER. DO IT WITH WORX.] WORX tools are engineered with cutting-edge technology, and above modern efficiency standards, so you can build a cost-effective tool collection that’s been designed to last.
  • [COMES WITH 6 BITS] The reloadable cartridge comes stocked with a PH1, PH2, SL4, SL6, SQ1, and SQ2. Everything you need to get driving.
  • [COMES WITH CHARGER] The battery is internal, so you just connect the included charger when you need to top it up.
  • [ONLY 1.1 LBS] At that weight you can drive screws all day without hand strain. And that makes it maneuverable, too. Hold it up high and get into tough places without fatigue.
Check Stock

TOOLSPACE 46pcs Cordless Car Buffer Polisher Kit 12V 7800RPM with 2 x 2.0Ah Li-ion Batteries, Perfect for Polishing Car/Home Appliance/Ceramic/Boat Detailing

  • Ergonomic design: The 2-handle, full-wrap with textured grip increases stability, accuracy and control, providing comfort and access to hard-to-reach spaces..
  • Powerful & Efficient: It runs on random orbit at 3000 orbits per minute, with the full-size 10-inch buffing applicator and bonnet covering a good amount of surface area at once..
  • Multiple application: Cordless convenience allows the option to operate the buffer polisher in remote locations, not just for cars, suitable for countertops, bathrooms and banisters as well..
  • Longer runtime: The kitted 20V 2.0Ah Power Share battery provides the Worx WX856L.1 with enough power to run for up to 45 minutes on a charge..
  • SAME BATTERY, EXPANDABLE POWER: Worx PowerShare Battery is compatible with all Worx 20V and 40V tools, outdoor power and lifestyle products..
Check Stock

AFKT AC/DC Adapter Replacement for Worx Zip Snip WX081L WX08IL ZipSnip Rechargeable Cordless Electric Handheld Box Paper Cutter Cutting Tool BYCR007042500U Power Supply Cord Battery Charger

  • World Wide Input Voltage 100-240VAC 50/60Hz.
  • OVP, OCP, SCP Protection (OVP: Over Voltage output Protection. OCP: Over Current output Protection. SCP: Short Circuit output Protection).
  • Tested Units. In Great Working Condition.
  • Please check your model whether it is the same as the listing before purchasing. We do not accept responsibility if you purchase wrong products.Thank you!.
  • AFKT AC/DC Adapter Replacement For Worx Zip Snip WX081L WX08IL ZipSnip Rechargeable Cordless Electric Handheld Box Paper Cutter Cutting Tool BYCR007042500U Power Supply Cord Battery Charger.
Check Stock

Rotary Cutter Blade pack of 8

  • For use in ZipSnip models: RC2600K,RC2601, RC2602, WX080L, WX081L.
  • Use to cut paper, plastic, cardboard, leather, canvas, carpet, wallpaper, wire Net, flower stem and more.
  • For use with Worx WX081L and Benchmark rotary cutter model # 1210-003.
Check Stock

AC Adapter fits Worx WX081L ZipSnip Cutting Tool Cordless 4V Electric Scissors Drill Wall DC Charger Power Supply Cord Cable 5 Feet with LED Indicator

  • Compatible with: Worx WX081L ZipSnip Cutting Tool Cordless 4V Electric Scissors Drill Wall DC Charger Power Supply Cord Cable.
  • Brand New, High Quality AC Wall Power Supply Adapter Charger, not original but 100% compatible.
  • Intelligent Switching circuit will recognize a full battery & automatically switches to a save mode Plug never heats or overcharges the battery, Short....
  • Please don't confuse us with the low quality / low current ones in the market..
Check Stock

WORX 20V 3'' Cordless Mini Cutter WX801L.1 Compact Angle Grinder Tool w/ 2 Cutting Discs, 2.0Ah Battery & Charger Included

  • [ Ergonomic Design ] - WORX Angle Grinder weighs only 3.4 pounds (tool only),which is compact and light weight. Ergonomic design for one-hand operation and good approachability, even in narrow spaces and overhead work..
  • [Highly Versatile] Highly versatile for different materials, ideal for cutting metal materials, tile, thin concrete, plastic and more..
  • [ High Cutting Efficiency ] - WORX mini cutter features a powerful motor to produce 19500 no load RPM for cutting metal, tile, and plastic materials..
  • [Longer Runtime] With a 2.0Ah battery, WX801L.1 is able to cut 71 pieces M8mm rebar, twice than other cutter competitors in the market..
  • [SHARE BATTERIES, SAVE MONEY] - WORX Power Share is compatible with all WORX 20v, 40v and 80v tools, outdoor power and lifestyle products..
Check Stock

Garden NINJA 40v Lithium Ion Battery Charger for Worx WA3580 battery (Charger Only)

  • Replacement Charger for WORX WA3747. Compatible with Worx cordless 40-volt tools: WG180, WG280, WG580, WG776.
  • Compatible with 40-volt MAX lithium batteries – WA3580 (battery not included).
  • Charges WORX MAX lithium 40-volt batteries in about 8 hours.
  • Includes an indicator system for quick battery life review..
Check Stock

WORX 20V Cordless Brad Nailer, 2 in 1 Cordless Nail Gun, Battery and Charger Included, 18GA Nails/Staples,WX840L.3

  • [ 2-IN-1 Brad Nailer ] - WORX cordless nail gun makes it possible for you to access both nailing and stapling function. There is no need to buy two separate nail guns for doing home improvement..
  • [ Single or Rapid Fire Mode ] - Take single shot at a time for preciser placement with our cordless brad nailer, or you can flip the switch to the contact actuated mode for rapid fire at speed up to 100 nails per minute to finish your work with remarkably high efficency..
  • [ Manual Nail Depth Adjustable ] - Adjust firing depth with the rotation knob at the top of the brad nailer cordless, making it easy for different needs in nailing. Simply Turn the rotation knob towards the right for deeper nail depth, while turn left for less nail depth..
  • [ Low-Nail Indicator &LED Light ] - The indicator reminds user when it's time to reload to make sure you have enough nalis to finish the job. Moreover, there are front-positioned LED lights，you can see just what you are doing in dim or dusty areas..
  • [SHARE BATTERIES, SAVE MONEY] - WORX Power Share is compatible with all WORX 20v, 40v and 80v tools, outdoor power and lifestyle products..
Check Stock

Auto feed Spool .065 10ft Edger Spools Replacement Trimmer Line Compatible with Worx WA0010 Weed Wacker Eater String with WA6531 GT Spool Cover for Electric String Trimmers 12 Line Spools 4 Caps

  • ①WA0010 Replacement Trimmer Line for WORX Select Electric String Trimmers：0.065"10ft Autofeed Edger Spool Compatible with WORX WG GT Cordless....
  • ②Trimmer Spool Line for Worx,weed eater string trimmer replacement spool, edger spools compatible with Worx trimmer spools weed eater string,works....
  • ③ It fits and works perfect as Oem WA0010 String Trimmer line for Worx,worx trimmer string,wa0010 trimmer string/wa0010 spool cap cover/wa0010....
  • ④Premium 10ft./ 0.065 inch Auto feed Edger Spool Line,each spool contains 10ft of line pre-wound, and installs in seconds,each package contains 12....
  • ⑤Good performance replacement line as the worx tools,use it with the commercial weed eater on the tough weeds, grass in your yard.It chews threw....
Check Stock

WORX 20V Cordless Pressure Washer, Portable Power Hydroshot Cleaner w/ Accessories, Battery & Charger, Suitable for Car Washing & Surface Cleaning w/ 5-in-1 Adjustable Nozzle,WG625.4

  • [5X MORE POWER] - Packed with 320 PSI rated pressure, which is up to 5 times stronger than ordinary garden nozzles with sprayer. WORX hydroshot pressure washer WG625.4 is ideal for your daily cars/bikes/windows cleanning..
  • [5-IN-1 NOZZLE] - Multiple spray patterns from 0°, 15°, 25°, 40°, and watering for multiple functions and applications. This cordless pressure washer lets you easily switch 1 nozzle for different using conditions..
  • [LIGHTWEIGHT & COMPACT] - Weighing only 3.7lbs with battery attached, WORX cordless power washer could draws water from any fresh source for gentle or heavy duty cleaning on the go, perfect to use around the dock or the pool..
  • [GO ANYWHERe, CLEAN EVERYTHING] - Self-priming function enables this portable power washer to draw water from any fresh water source like a pool, lake, or bucket. Much more portable than a traditional pressure washer. What's more, you will get a variety of accessories, including 20V 2.0 Ah battery, charger, soap bottle, 6m hose, bottle cap, 5-in-1 nozzle, quick connect adapter, long lance, rotary cleaning brush, rotary brush for vehicle..
  • [SAME BATTERY, EXPANDABLE POWER] - Worx PowerShare Battery is compatible with all Worx 20V and 40V tools, outdoor power and lifestyle products..
Check Stock

24-Piece Oscillating Multi-Tool Saw Blades and Accessories Set, Multi-Tool Accessory Kit, Attachments for Makita, Milwaukee, Fein, Worx, Ridgid, Ryobi, Harbor Freight, and More

  • ...me carpentry, or looking to cut through wood, plastic, metal, or drywall, you’ll find the right tool in this oscillating accessory kit..
  • WIDE COMPATIBILITY: These oscillating tool attachments are a perfect fit for the Makita Multitool (XMT032), HFT oscillating tool, Fein Multi Master Pro, Milwaukee M18 multi tool, Worx WX628L/665L, Ridgid JobMax, Porter Cable, Harbor Freight Chicago electric tool, Ryobi multitool, and Genesis Pro among others..
  • NOT COMPATIBLE WITH: Quick change or blade quick release tools, Dewalt DCS355, Dremel MM40/45, Fein Multi Master (Non-Pro models), Worx 20V Max, Worx wx682.9, Black & Decker BD Matrix, Makita XMT04ZB, and Rockwell Sonicrafter models. For any models/brands not listed, please contact us first to confirm compatiblity..
Check Stock