Top X Aluminum Bar

2\ Aluminum 6061 Round Rod Solid BAR 12\ Long +.07\/-0 New Lathe Stock

  • 5pcs Aluminum 6061 Round Rod Bar 0.3937" x 9.84".
  • Package include: 5 x Aluminum 6061 Round Rod.
Check Stock

Miter T-Bar for Jigs Fixtures Sleds Router Tables and General Woodworking 48 inch MADE IN THE USA

  • ...building sleds, jigs or fixtures for your woodworking projects that help keep your fixtures from moving or to help your sleds and jigs slide through a track, the Miter T Bar may just be the perfect solution. The Miter T Bar does this bit fitting neatly into most standard miter slots that measure ¾” x 3/8”. The aluminum bar can be used to slide your sleds or it can be used to lock fixtures like featherboards (when cut into smaller length pieces) in place in a miter slot..
  • The T-bar is made in the USA from a solid piece of extruded aluminum and can be cut into sections and drilled as needed. Typical uses for the T-bar are fixtures like featherboards where the featherboard needs to be kept stationary to apply consistent pressure. The T-bar also works great for sleds and other sliding fixtures like cutoff sleds on a table saw or coping sleds on a router table..
  • When mounting the Miter T-Bar it is a good idea to keep in mind that the “T” on the bottom of the track is approx. 1/8” tall, which is just enough to clear the t-slot on most miter slots. If mounted directly to platform for a sled, the tabs may catch and prevent the sled from sliding freely. To remedy this, we recommend using washers between the mounted track and the platform to allo....
Check Stock

Hoteche Industrial 10 25.4cc Gasoline Chainsaw G840012 Petrol Gas Saw Wood Cutting 2 Stroke 1

  • Aluminum Crankcase. easily operate with single hand. Automatic lubricating system, reduces the friction between the quiding board and the chain,....
  • Engine Displacement: 25.4CC Power(max.): 900W Engine Type: Single Cylinder, 2-Stroke, Air-Cooled Fuel/Gasoline Mixture Ratio: 1:35 Carburetor:....
  • Oil feeding system: Mechanical plunger pump Sprocket Pitch – No. of teeth: 3/8in(9.38mm) – 6T Fuel Tank capacity: 230ml Engine Oil Tank capacity:....
  • Speed(max.): 11000rpm Idle speed: 3500rpm Guide Bar: 10in.(250mm) Saw chain: Pitch: 3/8 in., Gauge: 0.050 Vibrations level: 12.1m/s2 Bar Length: 10"....
  • Package: 1pc x Chainsaw body 1pc x Guide bar 1pc x Saw chain 1pc x guide bar Cover 1pc x oil fuel tank 1pc x T wrench 1pc x screwdriver 1pc x file 1pc....
Check Stock

TYFYB 39 X13 X10 Black Aluminum Heavy Duty Pick-Up Truck Bed 5 Bar Tread Tool Box Trailer Storage Tool Box With Lock & Keys

  • 39"(L) x 13"(W) x 10"(H) Overall Size；Surface Finish:Powdercoated Black Aluminum；5 Bar Tread Pattern Strengthens the Aluminum for Maximum....
  • Rigid Construction - 5 Bar Tread pattern strengthens the aluminum for maximum durability；Under Body Tool Box - This box conveniently mounts under....
  • Protective Lock Cap - The lock features a cap which will keep water or duct from entering the lock, ensuring the locks performance for years；Drop....
  • With Lock and 2 Keys: This aluminum box has a lock and 2 keys so you can safely use it to prevent things from being lost..
  • Perfect Tool Cabinet for Anywhere: This tool box can be mounted on a hitch rack, cargo rack of your camper, perfect for the tongue of your enclosed....
Check Stock

Monarch Abode 19192 Matte Black Hand Hammered Baxter Bar Prep Sink 15 inches

  • HANDCRAFTED HIGH QUALITY CONSTRUCTION: The Black Hand Hammered Baxter Bar Prep/Kitchen Sink is handcrafted by our skilled artisans to strike a balance of beautiful design with lasting performance. The bar sink is made of solid, high-quality aluminum that will stand the test of time..
  • STYLISH APPEARANCE AND DESIGN: The small bar sink is enhanced with hand hammered impressions and a modern black powder coated finish. The bar sink drop-in is a perfect upgrade your home, condo, apartment, or restaurant..
  • EASY INSTALL: Designed for easy DIY installation as a luxurious black bar sink. The single bowl kitchen sink includes a cutout template for installation.
  • ITEM OVERALL DIMENSIONS: Features one pre-drilled faucet hole measuring 1-1/4 in. Outer dimensions: 15.125 in x 15.125 in x 6.5 in, Inner dimension: 12 in x 11 in x 6.5 in..
  • STANDARD BAR/KITCHEN SINK DRAIN SIZE - 3.5 inches without overflow. As metal sinks are not as thick as porcelain or stone sinks, please make sure the drain you purchase has threading all the way to the top..
Check Stock

Autekcomma Chrome Finishing Roof Rack Cross Bars Compatible for Toyota Highlander XLE/Limited & SE/LE/LE Plus/LE Hybrid 2014 2015 2016 2017 2018 2019

  • 1.WE STRIKE TO GET YOUR SMILE. We put customer’ experience in prior ,instruction tips will mark on each bar for better installation. Offer a minutes....
  • 2.CONFIDENCE FROM PREMIUM QUALITY .Die-Casting mould aluminum base + 2mm thickness aluminum bar that offers max loading up to150lb. Chromed finishing....
  • 3.THE MOST MULTI-PURPOSE CROSS BAR. This crossbars is compatible for cargo carrier ,bike mounts, snowboards , roof box ,roof bag, kayak racks, canoe....
  • 4.ADD PLEASURE INTO YOUR TRIP. Effective dynamic design for reduce wind resistance and noise. High strength light-weight crossbars constructed by....
  • 5.PACKAGE INCLUDED: 1 pair silver crossbars , needful hardware ,Extra end cap cover x 2,Allen driver x2, instruction manual x 1.
Check Stock

OPT7 Aura Dreamcolor Underglow LED Chasing Lighting Kit w/ Remote, Aluminum Casing, Exterior Neon Accent Underbody Light Bar, Multi-Mode, IP67 Water-Resistant, Car Truck Pickup RV, DC 12V

  • [Dreamcolor Mode] Our RGB LED bar holds 252 - 5050 LED pcs on the bar, uses a built-in IC (Integrated Circuit) chip, like an aurora in the sky, can simultaneously display multiple colors..
  • [Aluminum Casing] - 4pcs aluminum casing light bar with 252 LEDs (2 x 36'' & 2 x 48'').
  • [Safe & Neat Installation] - 18w gauge inline fuse power harness battery install, keeps your vehicle safe and neatly done..
  • [Exclusive Light Bar] - RGBIC is far superior made with IP67 waterproof, dustproof material, output ultra bright..
  • [One-Year Warranty] - Lifetime technical support and one-year warranty, OPT7 always stand behind you. Note: This kit is not compatible with AURA Original LED strip connection or AURA PRO..
Check Stock

Envy Scooters Prodigy S9 Street Edition Compete Scooter (White)

  • LARGER-SIZED STREET EDITION FEATURES – makes this stunt scooter a step-up from the classic Prodigy with a wider and longer Aluminum Deck (L520mm/20.5” x W125mm/4.9”), and taller and wider Thermal Bar (H650mm/25.6” x W600mm/23.6”).
  • PERFECTLY SUITED for the INTERMEDIATE to ADVANCED rider looking to make an upgrade to a stunt scooter to progress within the street scene.
  • SOLID HEAT-TREATED T-STYLE THERMAL BAR – designed with the pro scooter rider in mind to make for ultimate durability with high-quality parts and features.
  • SPEED AND COMFORT – is what you will get with the fast and smooth 120mm GAP CORE wheels with a Nylon bolt on brake (5mm Brake Bolt).
  • NEW DIAMOND IHC FORKS made from high-grade aluminum give a new ‘feel’ to the Prodigy Street Edition and are compatible with up to 125mm x 30mm scooter wheels.
Check Stock

Envy Scooters Prodigy S9 Street Edition Compete Scooter (Gray)

  • LARGER-SIZED STREET EDITION FEATURES – makes this stunt scooter a step-up from the classic Prodigy with a wider and longer Aluminum Deck (L520mm/20.5” x W125mm/4.9”), and taller and wider Thermal Bar (H650mm/25.6” x W600mm/23.6”).
  • PERFECTLY SUITED for the INTERMEDIATE to ADVANCED rider looking to make an upgrade to a stunt scooter to progress within the street scene.
  • SOLID HEAT-TREATED T-STYLE THERMAL BAR – designed with the pro scooter rider in mind to make for ultimate durability with high-quality parts and features.
  • SPEED AND COMFORT – is what you will get with the fast and smooth 120mm GAP CORE wheels with a Nylon bolt on brake (5mm Brake Bolt).
  • NEW DIAMOND IHC FORKS made from high-grade aluminum give a new ‘feel’ to the Prodigy Street Edition and are compatible with up to 125mm x 30mm scooter wheels.
Check Stock

Envy Scooters Prodigy S9 Street Edition Compete Scooter (Black)

  • LARGER-SIZED STREET EDITION FEATURES – makes this stunt scooter a step-up from the classic Prodigy with a wider and longer Aluminum Deck (L520mm/20.5” x W125mm/4.9”), and taller and wider Thermal Bar (H650mm/25.6” x W600mm/23.6”).
  • PERFECTLY SUITED for the INTERMEDIATE to ADVANCED rider looking to make an upgrade to a stunt scooter to progress within the street scene.
  • SOLID HEAT-TREATED T-STYLE THERMAL BAR – designed with the pro scooter rider in mind to make for ultimate durability with high-quality parts and features.
  • SPEED AND COMFORT – is what you will get with the fast and smooth 120mm GAP CORE wheels with a Nylon bolt on brake (5mm Brake Bolt).
  • NEW DIAMOND IHC FORKS made from high-grade aluminum give a new ‘feel’ to the Prodigy Street Edition and are compatible with up to 125mm x 30mm scooter wheels.
Check Stock

NEW 9 pcs 1/2

  • 9 Piece boring bar set features C-6 carbide for use in harder materials but also works great in aluminum and other soft metals All shanks are held to 0.0000-0.0005" from the nominal diameter and made of special heat treated alloy steel. Shank Diameter- 1/2".
  • Contains: (3) pcs. 5/16" minimum bore (1 ea. 3/4" bore depth x 2-1/4" overall, 1 ea. 1-1/8" x 2-5/8", & 1 ea. 1-1/2" x 3").
  • Contains: (3) pcs. 7/16" minimum bore (1 ea. 1-1/8" bore depth x 2-5/8" overall, 1 ea. 1-11/16" x 3-3/16", & 1 ea. 2-1/4" x 3-3/4"), (3) pcs. 9/16" minimum bore (1 ea. 1-1/2" bore depth x 3" overall, 1 ea. 2-1/4" x 3-3/4", & 1 ea. 3" x 4-1/2").
Check Stock

Anodized Aluminum Miter T Track w/T-Bar Rail for Jigs Fixtures Sleds Router Tables and General Woodworking 32 inch MADE IN THE USA

  • ..., your band saw or simply building a sled, a standard ¾” x 3/8” thick bar will do the trick!.
  • The “T” shape on the Miter Track also accepts the T-bar. The T-bar has been designed to fit neatly into the miter track profile for use with jigs, fixtures or sleds. The T-bar is made from a solid piece of extruded aluminum and can be cut into sections and drilled as needed. Typical uses for the T-bar are fixtures like featherboards where the featherboard needs to be kept stationary to apply consistent pressure. The T-bar also works great for sleds and other sliding fixtures..
  • Miter T Track is often used in woodworking applications but can be used most anywhere throughout a workshop setting. It is the ideal solution for router tables in need of a miter slot for miter gauges. The ¾” wide slot accommodates most miter gauges which makes it super handy for any workshop. Many woodworkers and professionals alike build jigs or sleds with UHMW bars on the bottom that fit right into this miter track..
  • When we decided to start manufacturing aluminum tracks many years ago (well over 20 years), we thought that it was very important to do our best to keep the manufacturing process here in the United States. We are proud to say that even after 20 years,....
Check Stock