Top Xbee Breakout Board - BuyWiseBest.com

SainSmart USB Host Android ADK Shield 2.0 for Arduino UNO MEGA R3 Mega2560 Duemilanove Nano Robot

PREMIUM QUALITY MATERIAL ENSURES LONG TERM SERVICE--This USB Breakout Board is made of 100% brand new and high quality material ensures longer use.
USB TYPE A FEMALE BREAKOUT BOARD--Standard USB type A female socket.
4 PINS USB A BREAKBOARD BOARD--With 4 pins including VBUS, D+, D- and GND.
IDEAL TOOL FOR USB POWER SUPPLY AND BREADBOARD DESIGN--Great for DIY USB power supply, breadboard design, etc.

Easy to solder:The upgraded USB-C breakthrough board has powerful power,three times the power as much as previous USB. Easy to integrate the USB-C connector into your project without soldering every tiny SMD pad,Easy to solder to the through-board terminals.
Simple and sturdy construction:The USB-C breakthrough board can be reversible.That can easily solve the general frustrating problem of USB cables.The USB breakthrough board can adds resistance to the original foundation.
Convert efficiently:The USB Type-C Breakout Board contain VBUS, GND, CC1, CC2, D+ and D- pins,In total of 6 USB-C connector that can be connect 0.1" pitch connector.Worked perfectly, The board can provide up to 1.5A nominal power and up to 3A power.Depending on the upstream equipment.Can definitely be used to convert keyboards to USB-C Detachable.
Apply for:The USB Type-C board can be used to replace the charging port on the astro a50 headset.PCBs quality and the contacts soldered with ease.Used these to convert an old hardwired keyboard to removable usb-c. Worked perfectly.
Package content:5pcs High quality USB Type-C Breakout Boards+5pcs pin connector.

This breakout board is specially made for Raspberry Pi pico.
The gold-plated surface can prevent oxidation, high-quality gold-plated surface, easy to weld.
All holes have been electroplated to increase the strength..
The breakout board is equipped with Raspberry Pi pico, which is convenient for users to develop and integrate flexibly.
The package does not include the Raspberry Pi pico, you need to configure it yourself..

【Introduction】- The breakout board uses WS2812S chip, used for 5050 LED..
【Support】- This WS2812 Breakout Board supports high brightness and RGB color..
【Can Connect a Lot of Lights】- Built in chip, it can connect a lot of lights in series..
【Operation】- After connection in series, each light can control color independently..
【Power Supply】- No matter for how much lights, it only need one control cable and two power cables..

The TCA9548A adapter is connected to an I2C device with multiple identical addresses on the same I2C port on the main control board for normal communication and use.There are 8 I2C interfaces on one expander, and there are eight bidirectional transfer switches that can be controlled by I2C bus. This means that after 1 expander is transferred, 8 identical addresses can be connected to the same I2C port..
Expansion board TCA9548A compatible with IIC bus and system management bus (SMBus), active low reset input, support for hot insertion, low standby current, no glitch during power-up, support for voltages between 1.8V, 2.5V, 3.3V and 5V buses Level shifting, TCA9548A I2C IIC multiplexer breakout board depending on the contents of the programmable control registers, any single SCn/SDn channel or combination of channels can be selected..
12pcs TCA9548A I2C IIC Multiplexer Breakout Board 8 Channel Expansion Board for Arduino.

Serial Basic Breakout Board CH340G serial signal serial ic breakout development board usb micro b connector save space diy electronics projects micro b cable jumper wires.
Base on USB converter IC CH340G, there is a wide range of operating systems . You may need to install drivers the first time you connect the chip to your computer's USB port or when there are operating system updates..
The output voltage is 3.3v by default, there is a 3.3v signal, it can also be changed to 5V, changing to 5V will cause the board to output 5V and 5V signals on the VCC pin(3 .3v to 5V by a short circuit selection).
There are two LEDs on the board connected to TX (green) and RX (yellow) for faster viewing of serial traffic.
Suitable for: Arduino Pro Mini, our GPS module, cellular module and many other devices that use serial communication.

♞【Product】3 Axis nema23 stepper motor driver controller kit.
♞【Application】This cnc kit are widely used in engraving machine, printer,....
♞【Stepper Motor】23HS2430B Nema23 57 stepper motor.
♞【Driver】CW5045 driver Voltage: DC 24-50V.
Current: rated maximum output reaches: ±4.5A.
♞【5 Axis Breakout Board】5 Axis breakout boad with cables,this breakout board needs to be connected to the parallel port and USB port of the....
♞【Power supply】400W,36V/9.7A switching power supply.

Full access to all the pins of the Smooth Stepper Board. Connects directly to the Smooth Stepper (from Warp9). The board is provided with sockets that allow the Smooth Stepper Board to be plugged directly into this board. No ribbon cables required. When using the Smooth Stepper board there is no need to use an additional power supply to power the board. It will draw power from the Smooth Stepper board. Built-in Passive Low Pass Filters for the all inputs..
C25 Smooth Stepper Breakout Board with push lock terminals.

Plug the unit directly into your USB port and have it act as a gateway between your computer and the XBee..
This unit works with all XBee modules including the Series 1 and Series 2.5, standard and Pro version.

Easy to operate: Use this module to easily extend the Raspberry pi Zero project to the Internet of Things or industrial control applications.
There is a mark on the breakout board that can clearly identify the pin position, Breakout board is of excellent quality and adopts double-sided gold forming process.
The module is small in size and does not occupy other space. It is very convenient when making DIY circuits, and the wires can be easily inserted into the terminals.
Compatible with Raspberry Pi: This GPIO terminal block is compatible with Raspberry Pi 1 Model B+, Pi 2 Model B, Pi 3 Model B, Pi 3 Model B+, Pi 4 Model B, Pi Zero, Pi Zero-W.
Note: This project needs to be welded and assembled by yourself.

Powerful Atom quad-core processor with 2Gb ram and 16GB Flash on board.
Developer kit includes large breakout board and AI camera module.
Gigabit Ethernet, AC WiFi, Bluetooth, Hi Performance Audio, USB-2, USB-3, SD, GPIO.
Peripherals include 9-axis sensor, bluetooth and XMOS audio power-amp.
Boots Linux right out of the box. What will you make with it?.