Top Xy Milling Vises

4 Pcs Anchor Wire Vise Anchor Vise Grape Trellis 9 Gauge Metal Wire Galvanized Solid Wire for Tightening 8~11 Gauge Wire to Build Trellises, Vineyards, Fences and Arbors

  • Sufficient Quantity: our anchor clamp set includes 4 pieces anchor wire vises and 1 bundle of galvanized iron wire, the vises are suitable for 8 to 11 gauge wires, they are enough to meet your work and replacement needs.
  • Reliable Material: these anchor cable vises are made of aluminum, and the iron wire with galvanized technology has long term applicability.
  • The anchor cable vise can effectively avoid the iron wire from slipping out, so you can use it with confidence.
  • Size Information: the size of our wire cutters is about 6 x 3 x 3 cm/ 2.36 x 1.18 x 1.18 inches, they are suitable for 8 to 11 gauge wire, each wire vise is about 30 grams, the specification of iron wire is 9 gauge, each roll is 32.81 feet in length, the matching combinations are convenient for you to buy.
  • Wire Selection: it is recommended to use our galvanized metal wire, do not use wires with other coatings, in order to use wire cutters correctly, please pay attention and follow our suggestions.
  • Applicable Scenarios: our vise and bendable wire can be applied to build vineyards, fences, trees and so on, they can probably provide a nice using experience for your garden work.
Check Stock

Milling Cutter, 3.175x2x17mm Straight Shank Engraving Good Durability Spiral Milling Cutter Tungsten Steel Milling Cutter Milling Cutter Single for Repair Tool

  • Made of tungsten steel material, with high hardness and strength, wear resistance and corrosion resistance..
  • The milling cutter is a single‑flute spiral milling cutter with fast processing speed and good chip removal effect..
  • The blade adopts mirror grinding technology, the appearance is not rough, and the milling is glossy..
  • The milling cutter is mainly used for plane milling, notch milling, step face milling and profiling milling..
  • The kit contains 5 spiral milling cutters, with standard size, often used in CNC engraving machine..
Check Stock

Ladieshow MT2-FMB22 Face Mill Holder + 400R-50-22 CNC Lather End Milling Cutter + 10pcs APMT1604 Carbide

  • Sturdy and Durable: The end mill set is made of carbide material, with high hardness, high strength, not easy to deform and damage, good impact resistance and long service life.
  • High-Precision Machining: The milling cutter kit adopts high-precision machining technology, and the surface adopts new coating technology, which has good oxidation resistance and high temperature resistance.
  • Machining Range: Face CNC milling cutters are suitable for precision machining, roughing, flat and step machining and are the ideal toolkit for heavy duty CNC milling.
  • High Speed: Face end mills have better cleanliness and more stable accuracy, and the rotation and milling feed rates are 3 times faster than ordinary milling cutters.
  • Widely Used: Face milling cutter is a common main accessory for milling CNC machine tools, fixture milling machines, horizontal boring machines, ordinary boring and milling machines, drilling machines, bench drills and small machine tools.
Check Stock

ASZLBYM 11pcs RPMT10T3 MOE R5 Indexable Carbide Milling Inserts Blade Milling Cutter with 5/8\/16mm SRDPN1616H10 Indexable Carbide Milling Tool Holder Metal Lathe Cutting Tools

  • PACKAGE INCLUDES : You will receive 1pc SRDPN1616H10 5/8”/16mm shank diameter carbide lathe milling tool holder , 11pcs RPMT10T3 MOE indexable carbide milling inserts cutters and 1pc T15 wrench..
  • Material : The SRDPN1616H10 5/8" lathe milling tool holder material is 40Cr steel, it has the characteristics of durability, sturdiness and stability, and good anti-rust performance. The RPMT10T3 MOE indexable milling inserts cutter material is carbide, and the coating is CVD Al2O3 TICN, It has good toughness, wear resistance and high temperature resistance, the milling insert can be used for milling cast iron, steel parts and stainless steel..
  • Milling tool holder cutter size : Shank Diameter ( length×width ) : 5/8"*5/8"(16mm*16mm).
  • RPMT10T3 MOE carbide milling insert size : Insert Style : RPMT , thickness: 0.156" ≈ 3.97mm , diameter : 0.393≈ 10mm, P=11° degree..
  • Easy to store: the milling tool holder and carbide milling inserts are packed in a plastic container, safe and easy to store, please rest assured to buy!.
Check Stock

Yost Vises 445 Combination Vise | 4.5 Inch Jaw Width Utility Pipe and Bench Vise |Secure Grip with Swivel Base and Large Pipe Jaw Capacity | Made with Cast Iron and Steel U Channel Bar

  • COMBINATION VISE: The Yost Vises 445 4.5-inch utility combination pipe and bench vise is made from a 30,000 PSI cast grey iron with steel U channel bar. Equipped with a large anvil work surface. Also has as a replaceable hardened steel serrated top jaws and a large pipe capacity permanent serrated pipe jaw..
  • TECHNICAL SPECS: Jaw Width 4.5" (11.43 cm), Jaw Opening 4" (10.16 cm), Throat Depth 2.625" (6.6675 cm), Min Pipe Capacity .125" (0.3175 cm), Max Pipe Capacity 2" (5.08 cm)..
  • SWIVEL BASE: 360-degree rotatable swivel base with 2 lockdowns..
  • HOW TO USE: Make sure vise is securely mounted to the workbench and the swivel base lock is secure. Open the vise by turning the vise handle counterclockwise. Place item between the serrated jaws. Close the vise by turning the vise handle clockwise until the item is snug in the serrated jaws, continue to tighten until you can no longer move item. Don't over tighten as this may damage item and/or the vise. When finished working on the item, turn screw handle counterclockwise to release the item..
  • YOST VISES QUALITY: Every Yost Vises tool is engineered to have high standards of quality, strength, and durability. We value quality over quantity and manufacture products that are safe and easy to use. We offer lifetime te....
Check Stock

Yost Vises 34C Combination Vise | 6 Inch Jaw Width Heavy-Duty Utility Pipe and Bench Vise |Secure Grip with Swivel Base and Large Pipe Jaw Capacity | Made with Ductile Iron | Blue

  • COMBINATION VISE: The Yost Vises 34C 6-inch utility combination pipe and bench vise are made from 65,000 PSI Tensile Ductile Iron body parts. It has hardened, replaceable steel pipe jaws as well as hardened steel flat serrated jaws and continuous rolled thread on the main screw. The pipe jaws are set back to allow for the machinist's vise use..
  • TECHNICAL SPECS: Jaw Width 6" (15.24 cm), Jaw Opening 10" (25.4 cm), Throat Depth 7.5" (19.05 cm), Min Pipe Capacity 0.25" (0.635 cm), Max Pipe Capacity 6" (15.24 cm)..
  • SWIVEL BASE: Interlocking swivel base with 360-degree motion and 2 lockdowns..
  • HOW TO USE: Make sure vise is securely mounted to the workbench and the swivel base lock is secure. Open the vise by turning the vise handle counterclockwise. Place item between the serrated jaws. Close the vise by turning the vise handle clockwise until the item is snug in the serrated jaws, continue to tighten until you can no longer move item. Don't over tighten as this may damage item and or the vise. When finished working on the item, turn screw handle counterclockwise to release the item..
  • YOST VISES QUALITY: Every Yost Vises tool is engineered to have high standards of quality, strength, and durability. We value quality over quantity and manufacture products that ....
Check Stock

Yost Vises M10WW Rapid Action Woodworking Vise | Quick Release Lever for Quick Adjustments | 10 Inch Jaw Width | Made with Heavy-Duty Cast Iron | Blue

  • WOODWORKING VISE: The Yost Vises M10WW 10-inch Rapid Action Woodworking Vise is made from 30,000 PSI cast iron with chrome plated steel sliding T-bar handle and steel guide rails. Has a rapid action lever for quick adjustments..
  • TECHNICAL SPECS: Jaw Width 10.5" (26.67 cm), Jaw Opening 14.875" (37.7825 cm), Throat Depth 4" (10.16 cm)..
  • HOW TO USE: To open the vise turn the vise handle counterclockwise. This will move the front jaw away from the stationary jaw to close turn the vise handle counterclockwise. To use the quick release feature of this vise, move the lever toward the vise handle. This will disengage the nut and allow you to quickly open or close the vise. The bench dog can be moved in position by loosening the finger bolt on the front of the vise..
  • YOST VISES QUALITY: Every Yost Vises tool is engineered to have high stan....
Check Stock

BAP400R-50-22-4T Milling Cutter NT40-FMB22 Collet Chuck Holder Indexable End Mill APMT1604 Carbide Inserts for Milling Machines (#1)

  • Adopted New Coating Technology: New coating technology is adopted on the surface, which has good oxidation resistance and high temperature resistance, it can be used for a long time.
  • BAP400R Right-angle Milling Cutter: BAP400R right-angle milling cutter reduces blade wear and saves processing costs.
  • Fast Milling: Fast milling, screw off-position fastening designed, make the Milling Inserts and cutter fit tightly.
  • High Working Performance: This is a high precision Milling Cutter , strong rigidity, good processing effect.
  • High Hardness: The milling cutter is made of high quality material, high hardness with good impact resistance.
Check Stock

Yost Vises LV-4 Homeowner s Vise | 4.5 Inch Jaw Width with a 3 Inch Jaw Opening Home Vise | Secure Grip with Swivel Base | Assembled with a Combination of Powder Coated Cast Iron and Steel | Blue

  • HOME VISE: Is the perfect tool for your home workshop. Made from heavy duty 65, 000 PSI Ductile Iron castings, 3x stronger than cast iron vises..
  • TECHNICAL SPECS: Jaw Width: 5" (12.7CM) x Jaw Opening: 5" (12.7CM) x Throat Depth: 4" (10.2CM) x Pipe Capacity: 0.125” D x 3.5"D (0.32CM x 8.9CM)..
  • SWIVEL BASE: Vise head rotates 360° with respect to the vertical, locking at every 30° or (12) twelve different locking positions and equipped with a large 3.5" x 2.7" (8.9CM X 6.9CM) anvil work surface..
  • HOW TO USE: Make sure vise is securely mounted to the workbench and the swivel base lock is secure. Open the vise by turning the vise handle counterclockwise. Place item between the serrated jaws. Close the vise by turning the vise handle clockwise until the item is snug in the serrated jaws, continue to tighten until you can no longer move item. Don't over tighten as this may damage item and/or the vise. When finished working on the item, turn screw handle counterclockwise to release the item..
  • YOST VISES QUALITY: Every Yost Vises tool is engineered to have high standards of quality, strength, and durability. We value quality over quantity and manufacture products that are safe and easy to use. We offer lifetime tech support to back our quality guarantee..
Check Stock

Yost Vises 750-E Multi-Jaw Rotating Vise System | 2 in 1 Multipurpose Bench and Pipe Vise | Secure Grip with Swivel Base | Made with a Combination of Ductile Iron & Hardened Steel | Medium Blue

  • MULTI-JAW VISE: The Yost Vises 750-E 5 Inch medium duty 60,000 PSI ductile iron cast vise has a dual jaw system equipped with a bench jaw to perfectly secure your wood or metal works as well as other manufacturing applications and a pipe jaw for your piping and tubing projects such as cutting or threading. Also has a large anvil work surface..
  • TECHNICAL SPECS: Jaw Width 5" (12.7 cm), Jaw Opening 5" (12.7 cm), Throat Depth 3" (7.62 cm), Min Pipe Capacity .375" (0.9525 cm), Max Pipe Capacity 2.5" (6.35 cm)..
  • SWIVEL BASE AND VISE HEAD: 360 Degree rotatable swivel base with dual lockdowns. Head of vise rotates a full 360 degrees..
  • HOW TO USE: Make sure vise is securely mounted to the workbench and the swivel base lock is secure. Open the vise by turning the vise handle counterclockwise. Place item between the serrated jaws. Close the vise by turning the vise handle clockwise until the item is snug in the serrated jaws, continue to tighten until you can no longer move item. Don't over tighten as this may damage item and/or the vise. When finished working on the item, turn screw handle counterclockwise to release the item..
  • YOST VISES QUALITY: Every Yost Vises tool is engineered to have high standards of quality, strength, and durability. We value quality over....
Check Stock

Milling Cutter, Milling Tool, ZDZCYS22DL 10Pcs 3.175mm Handle Milling Tool Cemented Carbide 2-Flute Straight Milling Cutter

  • 【Durable】10pcs cemented carbide milling cutter with high hardness, durable in use.
  • 【Material】The milling cutter is made of high-quality cemented carbide materials with long service life.
  • 【Features】The milling cutter has the characteristics of light weight, small size, easy to use and easy to carry.
  • 【Application】2-blade milling cutter is suitable for processing wood, MDF, acrylic, PVC, EVA, foam, plywood, etc.
  • 【Characteristic】Milling tool has a smooth surface, no burrs, sharp edges, milling, holes, and cutting edges.
Check Stock

OSCARBIDE Carbide Inserts APKT1604 TiAlN Coated Indexable Milling Inserts APKT Style,10 Piece/Box

  • APKT 1604 carbide turning inserts,85 degrees parallelogram,Relief Angle 11 degrees,nose radius 1/32"..
  • Made of Tungsten Carbide,TiAlN Coated ,the cutting speed are 4-7 time faster than generic steel,and Sharpened on a diamond wheel to make it longer tool life, providing you a better experience and durable use and Better cut.
  • Designed for cast iron and non-ferrous materials,good for both finishing and roughing.
  • Used for indexable face mill and end mill,Performing square milling and side milling,ramping milling, helical milling, slotting milling, plunging milling..
  • These Insert fit for our Carbide Indexable End Mills and other same size indexable end mills, please search B07SG8JKDS or B099WPXW29 to buy this indexable end mills.
Check Stock