Top Yoke Track Roller Bearing

(6) Garage Door 2\ Nylon Rollers w/Cap 7\ Stem 13 Ball Bearing Heavy Duty by The ROP Shop

  • (Pack of 2) Replacement Garage Door Nylon Roller.
  • Specs - Roller Diameter: 1 13/16" for a 2" track. Stem Length: 4" (3.75" from bevel). Stem Diameter: 7/16". Single Load: 75 lbs. Ball Bearings: 13. Roller Material: Nylon. Roller Color: White. Refer to images 2 & 3 for more information.
  • Includes - (2) Sealed Nylon Garage Door Rollers.
  • Rollers are constructed from nylon that is softer and quieter than plastic or metal rollers and smoother than original equipment rollers. Features a reinforced dual-wall bearing cage, sealed precision ball bearing with backside protective dust shield. Plus double plating thickness on stem is designed for max performance and ultra-life weather protection. Garage door roller rated for up to 20,000 cycles on a 12' door.
  • Installation Tips - Method 1: Slightly bend track at the seam to remove, replace roller and move the door to do the next roller (repeat on other side). Method 2: Remove screws that attach brackets to your door, secure cable before releasing the bottom brackets that are under the cable spring tension, then clamp the cable to the track, slide out old rollers, place new rollers in their place and screw in backers.
Check Stock

Bont FX1 Roller Skate Wheels with 688 Mini Bearings - Derby and Indoor Speed Quad Skating - Pack of 8 with Bearings

  • The Bont FX1 roller skate wheel is an ultra-lightweight, ultra-high-performance roller skate wheel. With super high rebound urethane combined with a unique mini bearing hub for fast acceleration and quick laterals.
  • The Bont FX1 wheel is great for roller derby or indoor rink skating. It is one of the only wheels on the market that uses the smaller 688 or 167 bearings rather than the traditional 608 skate bearing..
  • The mini roller skate bearing saves 12 grams per bearing and a whopping 192 grams (6.8oz) on a set of skates. That is a pretty huge weight saving. The mini bearings also spool up faster than 608 bearings getting you up to speed sooner for greater acceleration.
  • The 688 mini roller skate bearing has an exceptionally fine polished bearing track surface and incredibly precise balls. The lightweight plastic cages allow for lower rolling resistance.
  • Standard 60mm diameter by 38mm wide with 92A hardness. Comes in a set of 8 with 688 bearings.
Check Stock

INA NATR15 Bearing Track Roller, 35X18X15 MM

  • Track roller with needle bearings supports high static and dynamic loads in track-type applications.
  • Full complement of bearings for higher radial load capacity than caged bearings.
  • Yoke-type rollers for use with heavier loads or where clevis mounting is preferred.
  • Thick outer ring helps minimize deformation under bending stresses.
  • Rubber seals to retain lubricant and for protection against contaminants.
Check Stock

Durable CF5 Cam Follower Needle Roller Bearing Bolt Kit Bearing Roller Needle Roller Bearing Bolt Outer Diameter 13mm/0.51inch(4Pcs)

  • Package Content:4 x Needle Roller Bearing.
  • Product type:Bolt type track roller needle bearing.
  • Application:Widely used in large automatic transmission devices,industrial robots,plastic machines,fitness equipment,printers,woodworking machinery etc..
  • Advantages:Made of high grade bearing steel,more durable and longer working life,Male thread type,with a cylindrical roller,have higher load capacity..
Check Stock

24 Pcs Nylon Garage Door Roller 1.8 Inch Blue Garage Door Replacement Wheels for 2 Inch Track 6200ZZ 4.7 Inch Stem Quiet Seals Bearings Garage Track Replacement for Residential Commercial Door

  • ...door roller is 1.8 inch for 2" track, 4.7 inch length stem, the thickness of the rollers is 1/2 inch.
  • Appropriate size can make the roller work more smoothly on the track, which can match the vast majority residential garage door.
  • Quiet and Durable: the precision ball bearing of nylon replacement garage roller is made of quality nylon material and 6200ZZ bearings, smooth and high load, sturdy and durable, the quality nylon material reduces noise greatly, ensuring your garage door runs smoothly and quietly.
  • What You Will Get: you will receive 24 pieces blue nylon garage door rollers.
  • Sufficient quantity to meet your daily uses needs and replacements, the dimension of garage door roller can match the vast majority residential garage door.
  • Sealed Garage Door Roller: these garage door wheels are design of the reinforced double wall bearing cap, the cap provides additional protection to the 6200ZZ preventing dust and grime, dampness to penetrate the bearing.
  • Effectively extend the service life of the product.
  • Easy to Install: our garage door replacement wheel is easy to install and....
Check Stock

Set of 10---2 Inch 13 Ball Nylon Garage Door Roller (7 Inch Stem)

  • A Quantity of 10 — 13 Ball Nylon Garage Door Rollers(7 inch stem) SEALED BEARING.
  • 13 ball bearing rating: 125lbs per roller @ 20,000 cycles 12′ door.
Check Stock

HardwareXsupply 2\ Nylon Sealed Garage Door Rollers, 6200ZZ High Performance Ball Bearing (10 Pack, 4\ Stem)

  • UPGRADED- Reinforce 6200ZZ bearing for high performance durability..
  • SEALED - Clear cap provide additional protection to the 6200ZZ preventing dust and grime to penetrate the bearing..
  • NYLON – 2” Nylon roller to provide smooth and ultra quiet operation..
  • SIZE - Roller diameter 1.75" for 2" track. 4" inch length stem..
  • TESTED - Roller specified to perform up to 100,000 cycles at 160Lbs load test..
Check Stock

Garage Door Torsion Spring Center Support Bracket Residential Mini USA Center Support Universal

  • A Quantity of 10 -- 13 Ball Nylon Garage Door Rollers(7 inch stem) SEALED BEARING.
  • 13 ball bearing rating: 125lbs per roller @ 20,000 cycles 12' door.
Check Stock

HardwareXsupply 2" Nylon Sealed Garage Door Rollers, 6200ZZ High Performance Ball Bearing (12 Pack, 4" Stem)

  • UPGRADED- Reinforce 6200ZZ bearing for high performance durability..
  • SEALED - Clear cap provide additional protection to the 6200ZZ preventing dust and grime to penetrate the bearing..
  • NYLON – 2” Nylon roller to provide smooth and ultra quiet operation..
  • SIZE - Roller diameter 1.75" for 2" track. 4" inch length stem..
  • TESTED - Roller specified to perform up to 100,000 cycles at 160Lbs load test..
Check Stock

ZEKOO 12 FT 4 Doors Bypass Barn Door Hardware Four Rollers Style Kit

  • ... double track can let each barn door silde on each track where you want, they will not have too much overlap between, it can let your openings show maximum display in the same length track, the two barn doors slide independently without affecting each other..
  • 【Why Choice Our Sliding Bypass Hardware】1.Roller Bearing is high purity bearing steel Gcr15, made of reinforced steel and electrophoretic, ring fixed structure and external dust cover, prevent steel ball from leaving the locus and oil leakage, keep roller lifetime lubricated.
  • Passed the test of opening - closing for 160000 times, wear-resisting, ensure the stability of the move and the wheel's fluency. 2.The rail is Pre-drill 16" apart hole on rail to line up standard studs..
  • 【Heavy duty construction ensures safety】Material thickness up to 1/4 inch (6.3cm) Solid carbon steel (High Standard Q235), multiple high temperature fine electrostatic powder spraying process black frosted, corrosion protection, antirust, anti-scratch. 8.8 grade Self-tapping and roller bolt make our hardware kit can hold two 230lbs doors comfortably. Door Stopper have rubber covered, good buffer effect, and educe the noise.The hanger wheel surface is covered with nylon, slide very quietly..
Check Stock

ZEKOO Rustic 5 FT Bypass Barn Door Hardware Sliding Steel Track for Double Wooden Doors Kit

  • ... double track can let each barn door silde on each track where you want, they will not have too much overlap between, it can let your openings show maximum display in the same length track, the two barn doors slide independently without affecting each other..
  • 【Why Choice Our Sliding Bypass Hardware】1.Roller Bearing is high purity bearing steel Gcr15, made of reinforced steel and electrophoretic, ring fixed structure and external dust cover, prevent steel ball from leaving the locus and oil leakage, keep roller lifetime lubricated.
  • Passed the test of opening - closing for 160000 times, wear-resisting, ensure the stability of the move and the wheel's fluency. 2.The rail is one complete 5FT Pre-drill 16" apart hole on rail to line up standard studs..
  • 【Heavy duty construction ensures safety】Material thickness up to 1/4 inch (6.3cm) Solid carbon steel (High Standard Q235), multiple high temperature fine electrostatic powder spraying process black frosted,corrosion protection, antirust, anti-scratch. 8.8 grade Self-tapping and roller bolt make our hardware kit can hold two 230lbs doors comfortably. Door Stopper have rubber covered, good buffer effect, and educe the noise.The hanger wheel surface is covered with nylon, slide very quietly..
Check Stock

ZEKOO 10 FT Four Doors Sliding Interior by Pass Barn Door Hardware Rustic Style Use for Wooden Kit

  • ... double track can let each barn door silde on each track where you want, they will not have too much overlap between, it can let your openings show maximum display in the same length track, the two barn doors slide independently without affecting each other..
  • 【Why Choice Our Sliding Bypass Hardware】1.Roller Bearing is high purity bearing steel Gcr15, made of reinforced steel and electrophoretic, ring fixed structure and external dust cover, prevent steel ball from leaving the locus and oil leakage, keep roller lifetime lubricated.
  • Passed the test of opening - closing for 160000 times, wear-resisting, ensure the stability of the move and the wheel's fluency. 2.The rail is Pre-drill 16" apart hole on rail to line up standard studs..
  • 【Heavy duty construction ensures safety】Material thickness up to 1/4 inch (6.3cm) Solid carbon steel (High Standard Q235), multiple high temperature fine electrostatic powder spraying process black frosted, corrosion protection, antirust, anti-scratch. 8.8 grade Self-tapping and roller bolt make our hardware kit can hold two 230lbs doors comfortably. Door Stopper have rubber covered, good buffer effect, and educe the noise.The hanger wheel surface is covered with nylon, slide very quietly..
Check Stock