Top You Young Machinery

10mm x 10mm Length 1M Black Plastic Open Type Cable Wire Carrier Drag Chain Towline R18 for 3D Printer and CNC Machines

  • The Cable Drag Chain is easy to install and repair, free movement, low noise, wear-resistant, high-speed movement.
  • You can link the cables with each other to form one long length you need.
  • Surface gloss,Low temperature resistance, wear resistance and corrosion resistance.
  • Suitable for reciprocating motion in occasions, with built-in cables, pipes, water pipes, etc.
  • The Drag chain has been widely used in CNC machine tools,electronic equipments, fire machinery, stone machinery, glass machinery, doors and windows machinery, counting devices, electrical machines, etc.
Check Stock

Heyiarbeit 10mm to 10mm Shaft Coupling Aluminium Flexible Plum Coupling D30 L35 Connector Flexible Coupler for 3D Printer CNC Machine and Servo Stepped Motor

  • [Technical Parameter] Shaft Usage: 10 mm / 0.39" to 10 mm / 0.39".
  • Total Size: 35mm x 30mm / 1.38" x 1.18" (LxD).
  • [High Quality] Made of high strength aluminum alloy, excellent bearing capacity, long service life.
  • Need no lubrication, convenient and quiet to use.
  • [Feature] Stable and reliable performance, with good vibration damping, buffering and electrical insulation performance.
  • [Application] Widely used in shafting transmission of various mechanical devices, such as pumps, fans, compressors, hydraulic machinery, petroleum machinery, printing machinery, textile machinery, chemical machinery, mining machinery, metallurgical machinery, aviation (helicopter), ship high-speed power transmission system, steam turbine, piston power mechanical transmission, etc.
Check Stock

uxcell R28 15mm x 15mm Black Plastic Cable Wire Carrier Drag Chain 1M Length for CNC 1 Hole

  • External Size: 20x23mm(0.787x0.906 inch).
  • Change Size: You could link the cables with each other to form one long length you need..
  • Reinforced nylon, low temperature resistance, wear resistance, corrosion resistance..
  • NOTE: When the moving terminal is bent as "U" shape, the longer part will lay flat. Or the tail of the chain will bend upward..
  • The Drag chain has been widely used in CNC machine tools, electronic equipment, fire machinery, stone machinery, glass machinery, doors and windows machinery, injection machines, robots, overweight transportation equipment, automated warehouses and so on..
Check Stock

4 Pcs Extra Long LM8UU Linear Ball Bearings LM8LUU,8mm Bore Dia,15mm OD,45mm Length with Double Side Rubber Seal Great for CNC,3D Printer

  • High Quality: Made of professional aluminum material for rails, durable and anti-corrosion..
  • Special Point: Strong rigidity, small friction coefficient, can support smooth sliding.
  • Size: Model: SCS10UU, Nominal Shaft Diamter (dr): 10mm.
  • Application: Widely used in electronic equipment,woodworking machinery, door and window machinery, packaging machinery, medical machinery, printing machinery and other equipment.
  • Service: Enjoy a smooth&worry-free return service within a month. Any questions feel free to contact us, we will try our best to help you..
Check Stock

Heyiarbeit 10x11mm Plastic Cable Wire Carrier Drag Chain 1M R28 with End Connectors Open Type for Electrical Machines CNC Black 1Pcs

  • Size: 10mm x 11mm/0.39" X 0.43"(Inner H x Outer W).
  • 【CUSTOM LENGTH】- You can change the length you need by connecting multiple drag chains or splitting a single drag chain.
  • 【FEATURE】- The appearance of this cable carrier chain is beautiful,and surface gloss.
  • Reinforced nylon, reduces the noise of the cable chain while moving, while increasing wear resistance.
  • Our drag chain is resistant to low temperature, wear and corrosion.
  • 【ADVANTAGE】- Drag chain is designed to surround and guide flexible electrical cables and hydraulic or pneumatic hoses connected to moving automated machinery, they reduce wear and stress on cables and hoses, prevent entanglement.
  • The cable drag chain is easy to install and repair, free movement, low noise, wear-resistant, high-speed movement.
  • 【APPLICATION】- The drag chain suitable for a variety of automation equipment, such as CNC machine tools, electronic equipment, fire machinery, stone machinery, glass machinery, doors and windows machinery, injection molding machines, robots, overweight transportation equipment, automated warehouses and so on.
Check Stock

10Pcs Female Rod End, Rod End Bearing Steel Female, M4 Right Hand Threaded Rod End Joint Bearing

  • HIGH QUALITY AND DURABLE - These miniature bearings are made of high quality bearing steel for durability and long service life..
  • 10PCS ROD END BEARING - There comes total 10 pieces miniature bearings which you may use for many different projects..
  • FEATURE - Features smooth operation, small error, low noise, high speed..
  • HIGH PERFORMANCE- High precision, stable performance, long life and high reliability..
  • WIDE RANGE OF APPLICATION - Widely used in electrical machinery, power tools, sports equipment, packaging machinery, food machinery, printing machinery, engraving machines, automation equipment, CNC equipment, and so on..
Check Stock

uxcell R28 15mm x 40mm (InnerH*InnerW) Black Plastic Wire Carrier Cable Drag Chain 1M Length for CNC

  • Internal Size: 15x40mm(0.59x1.574 inch)(InnerH*InnerW).
  • External Size: 20x49mm(0.787x1.929 inch)(OuterH*OuterW).
  • Change Size: You could link the cables with each other to form one long length you need..
  • Reinforced nylon, low temperature resistance, wear resistance, corrosion resistance..
  • NOTE: When the moving terminal is bent as "U" shape, the longer part will lay flat. Or the tail of the chain will bend upward..
  • The Drag chain has been widely used in CNC machine tools, electronic equipment, fire machinery, stone machinery, glass machinery, doors and windows machinery, injection machines, robots, overweight transportation equipment, automated warehouses and so on..
Check Stock

Heyiarbeit 35x100mm Plastic Cable Wire Carrier Drag Chain 1M R100 with End Connectors Open Type for Electrical Machines CNC Black 1Pcs

  • Size: 35mm x 100mm/1.38" X 3.94"(Inner H x Outer W).
  • 【CUSTOM LENGTH】- You can change the length you need by connecting multiple drag chains or splitting a single drag chain.
  • 【FEATURE】- The appearance of this cable carrier chain is beautiful,and surface gloss.
  • Reinforced nylon, reduces the noise of the cable chain while moving, while increasing wear resistance.
  • Our drag chain is resistant to low temperature, wear and corrosion.
  • 【ADVANTAGE】- Drag chain is designed to surround and guide flexible electrical cables and hydraulic or pneumatic hoses connected to moving automated machinery, they reduce wear and stress on cables and hoses, prevent entanglement.
  • The cable drag chain is easy to install and repair, free movement, low noise, wear-resistant, high-speed movement.
  • 【APPLICATION】- The drag chain suitable for a variety of automation equipment, such as CNC machine tools, electronic equipment, fire machinery, stone machinery, glass machinery, doors and windows machinery, injection molding machines, robots, overweight transportation equipment, automated warehouses and so on.
Check Stock

uxcell R28 15mm x 20mm (InnerH*InnerW) Black Plastic Wire Carrier Cable Drag Chain 1M Length for CNC

  • Internal Size: 15x20mm /0.59"x0.787" (InnerH*InnerW).
  • External Size: 20x28mm/0.787"x1.1"(OuterH*OuterW)Bending radius: R28.
  • Change Size: You could link the cables with each other to form one long length you need..
  • Can not be opened.Reinforced nylon, low temperature resistance, wear resistance, corrosion resistance..
  • NOTE: When the moving terminal is bent as "U" shape, the longer part will lay flat. Or the tail of the chain will bend upward..
  • The Drag chain has been widely used in CNC machine tools, electronic equipment, fire machinery, stone machinery, glass machinery, doors and windows machinery, injection machines, robots, overweight transportation equipment, automated warehouses and so on..
Check Stock

ZXMOTO Machinery Mover with 360 Degree Rotation Cap 6 Ton, 13,227LBs Capacity Industrial Dolly Machinery Skate with 4 Polyurethane Wheels

  • This machinery mover works great.Rugged all-steel construction. 360 degree rotation adds maneuverability..
  • The wheels roll smoothly and easily. The rollers on each one make it easy to turn the mover with a load on it. The skates allow you to easily move the machine into position to be required..
  • Smooth movement and 360 degree rotation improves work efficiency and safety. When something need to be moved, the heavy machine dolly skate roller machinery mover with 360 degree rotation cap is best choice for you..
  • Compact size for easy storage. Easy and safe transport of heavy machinery and household appliances..
  • Application: The machinery mover is an excellent tool for warehousing, distribution, transportation that are requested to move many large heavy items. It can also used at home if you need. Ideal for industrial and commercial applications..
Check Stock

Plastic Drag Chain Cable Carrier Closed Type with End Connectors R38 18 x 18mm L1000mm for Electrical CNC Router Machines

  • External Size: 23x28mm(OuterH*OuterW)；Bending radius: R38.
  • Change Size: You could link the cables with each other to form one long length you need..
  • Can not be opened.Reinforced nylon, low temperature resistance, wear resistance, corrosion resistance..
  • NOTE: When the moving terminal is bent as "U" shape, the longer part will lay flat. Or the tail of the chain will bend upward..
  • The Drag chain has been widely used in CNC machine tools, electronic equipment, fire machinery, stone machinery, glass machinery, doors and windows machinery, injection molding machines, robots, overweight transportation equipment, automated warehouses and so on..
Check Stock

Elcoho 15 Pack Handheld Magnifier Plastic Magnifying Glass for Reading Jewelry Home Office Desk Accessories with Storage Bag

  • Sufficient quantity: there are 15 pieces of black plastic magnifying glasses, very large in quantity that suitable for many people to use together.
  • we also provide a bag for your easy storage and carry around.
  • Material: the handle and lens fixing ring are made of plastic that protect your magnifying glass from falling off and smashing into pieces.
  • the lens is made of acrylic with good magnification, clear and durable.
  • Color and size: the black magnifying glass with 6X clear magnification, clear enough for your daily use.
  • each lens with the diameter of 6.5 cm/2.5 inches, with the thickness of 1.3 cm/0.5 inch, 12.5 cm/5 inches long, reasonable size that fits for most people to use and carry about.
  • This magnifying glass is a toy for fun for young people, not a scientific tool, please do not be too far away from the object you are observing.
  • note, the ideal visual distance is 3-5 cm, so please keep the observing distance within 5 cm.
  • Extensive uses: the magnifier can be used to read newspapers, maps, and observe plants and nature or check machinery equipments and more.
Check Stock