Top Z Wave Car Sensor
Aeotec Multisensor 6 & Ceiling Recessor, Z-Wave Plus 6-in-1 Motion, Temperature, Humidity, Light, UV, Vibration Sensor, Battery included
- 6-in-1 Zwave MultiSensor: smart motion sensors, z wave humidity, temperature sensor, Zwave light sensor, lux, UV, vibration sensor..
- Up to 2 year battery life with 2 batteries or power via USB. 1 x CR123A included in the box..
- Super-small at 1.65 inches. Can be installed in corner, in-wall, on shelf or recessed in ceiling with provided Recessor accessory..
- Works with certified Z-Wave gateways and tested with Fibaro, HomeSeer, Indigo 7, openHAB, SmartThings, and Vera..
- Z-Wave Plus certified. Certification number: ZC10-15070011.
Check StockMonoprice 700 Door/Window Sensor | Longer Wireless Range, Burglar Alert, Easy Installation, Ideal for Home, Garage, Apartment - Z-Wave Plus Series
- Easy Setup: Setup is as simple as scanning the QR code on the sensor with your smartphone, then following the step by step instructions..
- Powerful and Robust Security: The Z Wave Plus V2 Series 700 standard provides the highest level of security of any Z Wave standard. It supports Network Key, AES 128 bit encryption, ECDH key agreement protocol, Security 2 (S2), and SmartStart, which renders man in the middle hacking virtually impossible..
- Long Battery Life: The Z Wave Plus Series 700 standard delivers up to 50% longer battery life than previous Z Wave standards, allowing this sensor's battery to last for up to 10 years..
- Small and Compact: Measuring only 2.2" x 1.0" x 0.2" (56 x 26 x 6 mm), this is one of the smallest and most compact door/window sensors on the market..
- Longer Wireless Range: The Z Wave Plus Series 700 standard provides a wireless hop mode range of up to 800 meters (2,624 feet), more than 200 meters greater than the Series 500 standard..
Check StockTrane XL850, TCONT850AC52UA, by Trane, Cert ID: ZC08-14090003
- Frequency Region: U.S./Canada/Mexico, Z-Wave Library Version: 4.55.00.
- Device Categories: Thermostats,Controllers.
- Supported Command Classes: Association,Battery,Binary Sensor,Binary Switch,Clock,Configuration,Door Lock,Firmware Update MD V2,Thermostat Setpoint V2,User Code,Wake Up,Sensor Multilevel V2,Switch.
- Controlled Command Classes: Association,Battery,Binary Sensor,Binary Switch,Clock,Configuration,Door Lock,Firmware Update,Multilevel Sensor,Multilevel.
Check StockZooz 700 Series Z-Wave Universal Relay ZEN17 for Awnings, Garage Doors, Sprinklers, and More | 2 NO-C-NC Relays (20A, 10A) | Signal Repeater | Hub Required (Compatible with SmartThings and Hubitat)
- ... physical on/off control or use your Z-Wave hub (required, sold separately) for wireless control. Your smart speaker is NOT a Z-Wave hub. This product is NOT supported by Wink or Z-Wave alarm panels..
- 2 SMART INPUTS: Monitor 12-24 V or dry contact inputs separately from the dry contact outputs. Connect analog binary sensors to receive status updates in your Z-Wave hub from a connected door sensor, water sensor, HVAC system, or alarm panel. Use the inputs to trigger the outputs automatically..
- AUTOMATE ANYTHING: Add Z-Wave connectivity to up / down DC motors in screens, motorized blinds, or awnings. Perfect to automate your garage door opener (use a single ZEN17 to control up to 2 garage doors independently), commercial gates, gas fireplace, sprinklers, doorbell, outdoor lighting, pool pump, whole house fan, and any 1-240 V device up to 20 A..
- QUICK INSTALLATION: Power it with a 12-24 V AC/DC power source or a standard USB C cable (included) and a power supply (sold separately). Wall-mount ready. Jumper wires NOT included. Do NOT power with 110 V!.
- NEW 700 Z-WAVE: Enjoy better signal coverage and a stronger Z-Wave repeater for your mesh network with the latest 700 series chip. It comes with S2 authenticated security and SmartStart for easy pairing. R....
Check StockZwave Door Sensor Window Sensor, Z-Wave Plus Enabled Aeotec 3-1 Door Window Sensor 7 Pro, Zwave Hub Required, Gen 7, White (Door/Window Sensor 7 Pro)
- Smallest 3-in-1 Zwave Door Sensor Window Sensor. MultiSensors include magnetic contact, dry contact relay, and a tilt sensor. The tilt detection must be in operation with the magnet sensor in its description.40% smaller than previous generation at only 2.8”x0.75”x0.7” (main body).
- 3 year+ battery life powered by 1 x 1/2 AA battery. Optimised to use up to 66% less battery power to communicate than previous generations..
- With a SmartStart enabled gateway, you can connect it to your ZWave hub by simply scanning its QR code. From there, stick it to your door and Door / Window Sensor 7 is ready to power your home and protect it..
- Zwave Window Sensor 7 is powered by the speed enhancements that come from Z-Wave Plus and Z-Wave S2 enabling it to wireless communicate 50% faster and up to 67% further in real-world use..
- Compatible with Samsung SmartThings, Vera, Zipabox, HomeSeer, Ring, Open Z-Wave, Nexia, Domoticz and more., Frequency: 908.40 MHz, 916.00 MHz, ID: ZC12-20080085.
Check StockFirst Alert Smoke Detector and Carbon Monoxide Detector Alarm | Z-Wave
- Help keep your family safe with this battery-operated smoke and carbon monoxide combination alarm. This easy-to-install smoke and carbon monoxide combination alarm connects with other Z-Wave compatible alarms and a Z-Wave hub (sold separately).
- Integrated wireless alarm system is Iris compatible to send you mobile alerts and emails, so you’re aware of dangers after the alarm is activated, whether you’re home or away.
- Alarm features photoelectric smoke-sensing technology optimized to detect larger smoke particles produced by smoldering fires, and an electrochemical carbon monoxide sensor.
- Certified for use with Nexia Home Intelligence, Ring Home Security System, and other third party Z-Wave systems.
- Includes test/silence button, side-access battery door, plus a tamper-resistant battery drawer and pins that lock the alarm to the mounting bracket.
- Certified for use with Nexia Home Intelligence or other Z-Wave systems.
- Combination Smoke and Carbon Monoxide protection that alerts you whether you are home or away.
- Photoelectric smoke sensor helps reduce false alarms such as from cooking or shower steam.
Check StockAeotec Siren 6, Z-Wave Plus S2 Enabled Zwave Siren Safety Speaker, Wall-Mounted Sound & Light Security Intruder Zwave Alarm with Backup Battery, 110dB
- Aeotec Zwave Siren 6 is your home smart indoor siren. Built with Z-Wave Plus S2 to be a smart home security siren, it features a 110dB speaker coupled with 1,000 lumens visual light alert strobe. Can be used as siren for security alarm, smoke sensor, and CO sensors via Z-Wave.
- Pre-loaded 6 security sounds, 8 safety sounds, and 30 tones in total. Each tone is volume adjustable between 80dB and 110dB.
- 4-hour backup battery lets Siren 6 work even when power is turned off.
- Can also be used as doorbell by pairing with Aeotec Button. Can use up to 3 zwave buttons, each sold separately.
- 5-Compatible with certified Z-Wave gateways including: Samsung SmartThings, HomeSeer, Open Z-Wave, Zipabox and more(Not compatible with Vera). Z-Wave Plus and Z-Wave S2 certified for quicker response time, better wireless range up to 490 feet in open space, and additional wireless security encryption. Z-Wave Plus certification number: ZC10-19046417..
Check StockHomeSeer HS-MS100+ G2 Z-Wave Plus Motion Sensor
- MOTION SENSOR: Sends Z-Wave commands back to the hub when motion has been sensed and when motion has not been sensed for a period of time..
- EASY TO INSTALL: Includes 1-screw magnetic mount for easy installation anywhere in your home..
- SECURE: Includes Z-Wave S2 encryption for the highest level of security..
- COMPATIBILITY: Works with most Z-Wave hubs. Device handler available for SmartThings new app users..
Check StockHomeSeer HS-LS100+ Z-Wave Plus Leak Sensor
- LEAK SENSOR: Sends Z-Wave commands back to your hub when water is sensed or has not been sensed for a period of time..
- TWO MOUNTING OPTIONS: Simply place the unit where you want it or attach it to the provided cable probe wall mount for even greater accuracy..
- SECURE: Works with Z-Wave S2 encryption for the highest level of security..
- COMPATIBILITY: Works with most Z-Wave hubs. Device handler available for SmartThings new app users..
Check StockFIBARO Motion Sensor Z-Wave Plus Multisensor-Movement Temperature Light Intensity Accelerometer FGMS-001 doesn t work with HomeKit
- All you need: dependable motion alerts, quick light reports, real-time temperature readings, and vibration notifications sent straight to your z-wave....
- And more: all data is transmitted to your system using encrypted signals, protected by tamper alerts. With the multifunctional led, you can access....
- Hub required: this sensor will work beautifully with any open z-wave system like smart things, Vera, nexia, home center lite, or home seer. It is not....
- Ultra small: install the smallest 4-in-1 sensor anywhere without ruining the view. It attaches to any flat surface with a single screw or a piece of....
- You're covered: this is a z-wave plus certified and ul listed device created and built in Europe from quality materials. Support portal and....
Check StockAeotec Multisensor 6 Z-Wave Plus 6-in1 motion temperature humidity light UV vibration sensor
- 6-in-1 Z-Wave Plus MultiSensor: motion, humidity, temperature, light lux, UV, vibration sensor..
- Super-small at 1.8 inches. Can be installed in corner, in-wall, on shelf or in downlight..
- Works with certified Z-Wave gateways and tested with Fibaro, Indigo 7, openHAB, SmartThings, Vera..
- Z-Wave Plus certified. Certification number: ZC10-15070011.
Check StockSensative Z-Wave Plus Indoor/Outdoor Flood Prevention and Water Sensor Strips Drip Works with SmartThings
- Ultra-thin Z-Wave Plus sensor notifies you when water leaks or freezing temperatures are detected.
- Included temperature and light sensors monitor ambient temperature and light.
- Communicates with Z-Wave devices up to 131 feet (40 meters).
- Compatible with most Z-Wave controllers, plus Ring, Raspberry Pi and more.
Check Stock