Top Z Wave Gas Sensor

Zooz 700 Series Z-Wave Plus 4-in-1 Sensor ZSE40 (Motion / Light / Temperature / Humidity)

  • 4 SMART SENSORS IN 1: This compact device detects and reports motion, temperature, humidity, and light level to your smart home app. Compatible Z-Wave hub required, sold separately..
  • NEW 700 SERIES VERSION: The included CR123A battery makes the sensor lasts much longer than any previous version. Updated motion detection allows you to get even quicker activity reports. New Z-Wave chip for better performance..
  • CUSTOMIZE IT: Choose from 7 levels of motion sensitivity, adjust the motion clear delay time, and pick from 3 different LED indicator modes (your hub needs to support advanced parameter input)..
  • SECURITY FIRST: This sensor is equipped with the latest S2 authenticated security and signal encryption. It's Z-Wave Plus 2 certified to ensure it complies with the highest industry standards. Supports SmartStart inclusion with a unique identifying PIN and QR code..
  • WILL IT WORK WITH MY HUB? This sensor is NOT supported by Wink, Vivint, ADT Pulse, Qolsys, or other Z-Wave alarm panels. It will work great with open systems like Hubitat, HomeSeer, Home Assistant, and compatible with SmartThings Hub..
Check Stock

Aeotec Multisensor 6 & Ceiling Recessor, Z-Wave Plus 6-in-1 Motion, Temperature, Humidity, Light, UV, Vibration Sensor, Battery included

  • 6-in-1 Zwave MultiSensor: smart motion sensors, z wave humidity, temperature sensor, Zwave light sensor, lux, UV, vibration sensor..
  • Up to 2 year battery life with 2 batteries or power via USB. 1 x CR123A included in the box..
  • Super-small at 1.65 inches. Can be installed in corner, in-wall, on shelf or recessed in ceiling with provided Recessor accessory..
  • Works with certified Z-Wave gateways and tested with Fibaro, HomeSeer, Indigo 7, openHAB, SmartThings, and Vera..
  • Z-Wave Plus certified. Certification number: ZC10-15070011.
Check Stock

Monoprice 700 Door/Window Sensor | Longer Wireless Range, Burglar Alert, Easy Installation, Ideal for Home, Garage, Apartment - Z-Wave Plus Series

  • Easy Setup: Setup is as simple as scanning the QR code on the sensor with your smartphone, then following the step by step instructions..
  • Powerful and Robust Security: The Z Wave Plus V2 Series 700 standard provides the highest level of security of any Z Wave standard. It supports Network Key, AES 128 bit encryption, ECDH key agreement protocol, Security 2 (S2), and SmartStart, which renders man in the middle hacking virtually impossible..
  • Long Battery Life: The Z Wave Plus Series 700 standard delivers up to 50% longer battery life than previous Z Wave standards, allowing this sensor's battery to last for up to 10 years..
  • Small and Compact: Measuring only 2.2" x 1.0" x 0.2" (56 x 26 x 6 mm), this is one of the smallest and most compact door/window sensors on the market..
  • Longer Wireless Range: The Z Wave Plus Series 700 standard provides a wireless hop mode range of up to 800 meters (2,624 feet), more than 200 meters greater than the Series 500 standard..
Check Stock

Trane XL850, TCONT850AC52UA, by Trane, Cert ID: ZC08-14090003

  • Frequency Region: U.S./Canada/Mexico, Z-Wave Library Version: 4.55.00.
  • Device Categories: Thermostats,Controllers.
  • Supported Command Classes: Association,Battery,Binary Sensor,Binary Switch,Clock,Configuration,Door Lock,Firmware Update MD V2,Thermostat Setpoint V2,User Code,Wake Up,Sensor Multilevel V2,Switch.
  • Controlled Command Classes: Association,Battery,Binary Sensor,Binary Switch,Clock,Configuration,Door Lock,Firmware Update,Multilevel Sensor,Multilevel.
Check Stock

Zwave Door Sensor Window Sensor, Z-Wave Plus Enabled Aeotec 3-1 Door Window Sensor 7 Pro, Zwave Hub Required, Gen 7, White (Door/Window Sensor 7 Pro)

  • Smallest 3-in-1 Zwave Door Sensor Window Sensor. MultiSensors include magnetic contact, dry contact relay, and a tilt sensor. The tilt detection must be in operation with the magnet sensor in its description.40% smaller than previous generation at only 2.8”x0.75”x0.7” (main body).
  • 3 year+ battery life powered by 1 x 1/2 AA battery. Optimised to use up to 66% less battery power to communicate than previous generations..
  • With a SmartStart enabled gateway, you can connect it to your ZWave hub by simply scanning its QR code. From there, stick it to your door and Door / Window Sensor 7 is ready to power your home and protect it..
  • Zwave Window Sensor 7 is powered by the speed enhancements that come from Z-Wave Plus and Z-Wave S2 enabling it to wireless communicate 50% faster and up to 67% further in real-world use..
  • Compatible with Samsung SmartThings, Vera, Zipabox, HomeSeer, Ring, Open Z-Wave, Nexia, Domoticz and more., Frequency: 908.40 MHz, 916.00 MHz, ID: ZC12-20080085.
Check Stock

Zooz Z-Wave Plus Power Switch ZEN15 for 110V AC Units, Sump Pumps, Humidifiers, and More

  • POWERFUL PLUG: The only Z-Wave Plug that lets you safely control and monitor heavy-duty 110V appliances from your Z-Wave smart home system. Connect your refrigerator, humidifier or dehumidifier, AC unit, fan, sump pump, or a gas clothes dryer to Z-Wave. NEW: 45 degree angled plug so you can fit 2 Smart Switches in a single receptacle!.
  • POWERFUL Z-WAVE: With built-in Z-Wave Plus signal repeater and range test tool, the Power Switch will boost your whole Z-Wave network while keeping it protected with AES signal encryption..
  • POWERFUL CONTROL: Monitor energy use of connected appliances in live mode or over time with W, kWh, A, and V reports (your Z-Wave hub needs to support this feature). NOTE: It is NOT a power outage monitor! Quick status reports to the controller and on/off state recovery after power failure..
  • POWERFUL HARDWARE: Made from high-quality components that will last, even when it's very cold or very hot (14 - 104F, indoor use only). ETL certified: complies with North American electrical safety standards. Extra-thick flexible cord is perfect for installations with no immediate access to a receptacle..
  • COMPATIBILITY: Use the Power Switch with any certified Z-Wave gateway for simple on/off control (Wink, Z-Wave alarm panels). Advanced settings and....
Check Stock

First Alert Smoke Detector and Carbon Monoxide Detector Alarm | Z-Wave

  • Help keep your family safe with this battery-operated smoke and carbon monoxide combination alarm. This easy-to-install smoke and carbon monoxide combination alarm connects with other Z-Wave compatible alarms and a Z-Wave hub (sold separately).
  • Integrated wireless alarm system is Iris compatible to send you mobile alerts and emails, so you’re aware of dangers after the alarm is activated, whether you’re home or away.
  • Alarm features photoelectric smoke-sensing technology optimized to detect larger smoke particles produced by smoldering fires, and an electrochemical carbon monoxide sensor.
  • Certified for use with Nexia Home Intelligence, Ring Home Security System, and other third party Z-Wave systems.
  • Includes test/silence button, side-access battery door, plus a tamper-resistant battery drawer and pins that lock the alarm to the mounting bracket.
  • Certified for use with Nexia Home Intelligence or other Z-Wave systems.
  • Combination Smoke and Carbon Monoxide protection that alerts you whether you are home or away.
  • Photoelectric smoke sensor helps reduce false alarms such as from cooking or shower steam.
Check Stock

Aeotec Siren 6, Z-Wave Plus S2 Enabled Zwave Siren Safety Speaker, Wall-Mounted Sound & Light Security Intruder Zwave Alarm with Backup Battery, 110dB

  • Aeotec Zwave Siren 6 is your home smart indoor siren. Built with Z-Wave Plus S2 to be a smart home security siren, it features a 110dB speaker coupled with 1,000 lumens visual light alert strobe. Can be used as siren for security alarm, smoke sensor, and CO sensors via Z-Wave.
  • Pre-loaded 6 security sounds, 8 safety sounds, and 30 tones in total. Each tone is volume adjustable between 80dB and 110dB.
  • 4-hour backup battery lets Siren 6 work even when power is turned off.
  • Can also be used as doorbell by pairing with Aeotec Button. Can use up to 3 zwave buttons, each sold separately.
  • 5-Compatible with certified Z-Wave gateways including: Samsung SmartThings, HomeSeer, Open Z-Wave, Zipabox and more(Not compatible with Vera). Z-Wave Plus and Z-Wave S2 certified for quicker response time, better wireless range up to 490 feet in open space, and additional wireless security encryption. Z-Wave Plus certification number: ZC10-19046417..
Check Stock

HomeSeer HS-MS100+ G2 Z-Wave Plus Motion Sensor

  • MOTION SENSOR: Sends Z-Wave commands back to the hub when motion has been sensed and when motion has not been sensed for a period of time..
  • EASY TO INSTALL: Includes 1-screw magnetic mount for easy installation anywhere in your home..
  • SECURE: Includes Z-Wave S2 encryption for the highest level of security..
  • COMPATIBILITY: Works with most Z-Wave hubs. Device handler available for SmartThings new app users..
Check Stock

HomeSeer HS-LS100+ Z-Wave Plus Leak Sensor

  • LEAK SENSOR: Sends Z-Wave commands back to your hub when water is sensed or has not been sensed for a period of time..
  • TWO MOUNTING OPTIONS: Simply place the unit where you want it or attach it to the provided cable probe wall mount for even greater accuracy..
  • SECURE: Works with Z-Wave S2 encryption for the highest level of security..
  • COMPATIBILITY: Works with most Z-Wave hubs. Device handler available for SmartThings new app users..
Check Stock

FIBARO Motion Sensor Z-Wave Plus Multisensor-Movement Temperature Light Intensity Accelerometer FGMS-001 doesn t work with HomeKit

  • All you need: dependable motion alerts, quick light reports, real-time temperature readings, and vibration notifications sent straight to your z-wave....
  • And more: all data is transmitted to your system using encrypted signals, protected by tamper alerts. With the multifunctional led, you can access....
  • Hub required: this sensor will work beautifully with any open z-wave system like smart things, Vera, nexia, home center lite, or home seer. It is not....
  • Ultra small: install the smallest 4-in-1 sensor anywhere without ruining the view. It attaches to any flat surface with a single screw or a piece of....
  • You're covered: this is a z-wave plus certified and ul listed device created and built in Europe from quality materials. Support portal and....
Check Stock

Aeotec Multisensor 6 Z-Wave Plus 6-in1 motion temperature humidity light UV vibration sensor

  • 6-in-1 Z-Wave Plus MultiSensor: motion, humidity, temperature, light lux, UV, vibration sensor..
  • Super-small at 1.8 inches. Can be installed in corner, in-wall, on shelf or in downlight..
  • Works with certified Z-Wave gateways and tested with Fibaro, Indigo 7, openHAB, SmartThings, Vera..
  • Z-Wave Plus certified. Certification number: ZC10-15070011.
Check Stock