Top Z wave Enabled Outlets
GE 45603 Z-Wave Technology Wireless Lighting Control Fluorescent Light & Appliance Module
- The switch enables you to wirelessly control to turn lights on and off, schedule a timed event or create a custom scene from anywhere in the world, at any time of the day..
- Features one always-on pass-through AC outlet and one Z-Wave enabled outlet..
- Space-efficient, side-plug design does not block lower outlet or obstruct placement of furniture..
- Easily control lighting with your mobile device or computer using any Z-Wave certified gateway, or control lighting on location with the manual push-button control or a Z-Wave certified remote..
- Compatible with the following Z-Wave certified Hubs: SmartThings, Pulse, Trane, Wink, Alexa, Nexia, Honeywell, HomeSeer, Smart Security, Harmony, Vera, Connect, Iris. Works with Amazon Alexa and Google Home..
Check StockGE Enbrighten Z-Wave Plus Dual Outlet Smart Plug On/Off Switch, Grounded Outlets Controlled Together, Built-in Repeater / Range Extender, Zwave Hub Required, Works with SmartThings, Wink, Alexa, 14282
- Wirelessly schedule and control 2 lamps or small appliances together from anywhere, at any time with any mobile device..
- Smart Switch contains two Z-Wave controlled outlets allowing control of two devices at the same time (Not independent of each other)..
- Up to 50% improved wireless range, 250% faster processor, 400% more memory and energy efficiency over Z-Wave Classic products..
- Space-efficient design does not block second outlet or obstruct furniture placement..
- Requires a Z-Wave certified gateway, providing remote access from any mobile device – compatible with Iris, ADT Pulse, SmartThings, Nexia, Alexa and more!.
Check StockNortek GoControl WD500Z5-1: Z-Wave Wall Dimmer Switch 500W 908.42 MHz 120VAC 15A
- The WD500Z5-1 Wall Mounted Dimmer allows remote ON/OFF control and dimming of connected lights. The Z-Wave Wall Mount Dimmer is easily wired in place of a standard wall dimmer. This device requires a Neutral connection. The Wall Mounted Dimmer integrates with other Nortek Security & Control Z-Wave enabled products, and can also act as a wireless repeater to ensure that commands intended for another device in the network are received (useful when a device would otherwise be out of radio range)..
- Replaceable Trim Ring The WD500Z5-1 Wall Mount Switch has a field replaceable trim ring - the color of the device can be altered with the Trim Ring Kit model in black, brown, almond and ivory. Auto-Sense: Unique to Nortek Security & Control, the Auto-Sense feature allows for local lamp activation independent of the Z-Wave controller status..
- Maximum Load: 500 Watts for control of permanently installed lighting fixtures only (Not for control of receptacles) Signal (Frequency): 908.42 MHz Range: Up to 100 feet line of sight between the wireless controller and/or the closest Z-Wave device Input: 120v 15A 60Hz.
- Network wide inclusion Scene: Command class Security beaming Requires a Neutral Auto-Sense feature built-in Replaceable trim ring design.
Check StockNewOne Z-Wave Plug, 500 Series Smart Plug, Compatible with SmartThings, Wink, Alexa, Google Assistant
- Z-Wave hub required: Work with Z-Wave certified hub, such as SmartThings, Hubitat, Vera and Wink. Z-Wave Frequency: 908.42MHz. FCC & ETL listed..
- Timer and schedule: Control lights and small applications to come on or turn off via a schedule at certain time of the day to meet your needs and reduce your electricity bill, set up custom scenes with other devices to make a smart home automation..
- Compact Size: Mini size design makes it portable and you can make the most of your wall outlets. Control your home applications with 15A, 125 VAC grounding receptacle for use..
- Voice Control: ALEXA & GOOGLE ASSISTANT COMPATIBLE (requires a Z-Wave certified hub). CANNOT connect directly with ECHO PLUS!.
- Easy to Setup: No wiring required. Simply plug in the device to a wall outlet and connect to your hub for convenient smart outlet features..
Check StockHoneywell Z-Wave Plus Smart On/Off Light and Appliance Switch, Dual Outlet Plug-In, 2 Controlled Together | Repeater Range Extender| ZWave Hub Required - SmartThings, Wink, and Alexa Compatible, 39342
- WIRELESSLY CONTROL & SCHEDULE LIGHTS & OTHER DEVICES – Schedule timed events for connected devices. Customize scenes for day or night, home or away. Wirelessly control switch from anywhere through your smartphone, tablet, PC or Z-Wave remote..
- 2 SIMULTANEOUSLY CONTROLLED GROUNDED OUTLETS – features 2 grounded outlets that can be controlled at the same time (NOT SEPERATLEY) and a manual ON/OFF & program physical button. Works with all LED, CFL, halogen and incandescent bulbs and other devices..
- REQUIRES A Z-WAVE CERTIFIED HUB – Compatible with the following Z-Wave Hubs: Honeywell, SmartThings, Pulse, Trane, Wink, Nexia, Honeywell, HomeSeer, Harmony Home Hub Extender, Vera, Fibaro, Vivint and ADT..
- ALEXA COMPATIBLE (HUB REQUIRED) – Requires an Alexa supported hub for voice control with Amazon Echo Products (Alexa device and hub are sold separately). Cannot connect directly with ECHO PLUS (Only ZigBee products can connect directly to Echo Plus)..
- EASY SETUP – simply plug the module into any in-wall outlet, then connect your lights or devices to the smart outlets located on the side of the plug-in (one outlet on left and right side). Space saving design will leave the bottom outlet free to use when plugged into t....
Check StockFIBARO Double Switch 2 Z-Wave Plus Smart Remote Relay for 2 Devices, FGS-223, doesn't Work with HomeKit
- To be installed in wall switch boxes or electrical outlets making your existing switch/outlet compatible with your Z-Wave network.
- Works with various types of switches – momentary, toggle.
- Monitors your power and energy consumption (Home Center 2 or Home Center Lite may be required).
- Z-Wave Certified: Cert ID: ZC10-16095203/ Frequency Region: U. S. /Canada/Mexico, Z-Wave Library Version: 4. 55. 00.
Check StockENERWAVE ZWN-RSM2-PLUS-NEW Z-Wave Plus Dual Module, Hidden Smart Switch, Single Pole, 120-277VAC, 10A Per Relay, Neutral Wire Required, ZWN-RSM2-PLUS, Black (New Version), White
- Enerwave Z-Wave Plus Dual Relay is the most advanced and customizable module you can add to your existing appliances and lights. Module can be installed in wall boxes behind switches and outlets or in ceiling boxes behind ceiling fans or chandeliers. Hidden relay allows you to use original switches and decorative wall plates.
- Remotely turn your appliances (lights, fans) on and off from an internet-connected smartphone, tablet, or computer. Program Z-Wave relay switch in scenes, groups, and associations. Dynamic scheduling and control from anywhere. Z-Wave hub required.
- Z-Wave Plus, featuring 67% improvement in range, 250% more bandwidth, Over The Air (OTA) firmware updates. Backwards compatible with existing Z-Wave devices.
- 120-277VAC, 10A maximum load per relay. Not compatible with security panels such as Honeywell Panel, NORTEK (2GIG) Security & Control Panel. ETL-listed, FCC compliant. Dimensions: length 2.03” x width 1.72” depth 0.62”.
- Get into IoT with the best home automation device. Connect your Z-Wave hub to Alexa or Google Assistant for full voice control. Compatibility with Alexa, Google Assistant, or IFTTT is dependent on the Z-Wave hub that is installed.
Check StockMinoston Z-Wave Switch On/Off Toggle Wall Light Switch Works with SmartThings, Wink, Support 3-Way Installation, Signal Repeater, Required Z-Wave Hub, White(MS12Z)
- Voice Control: This Z-Wave smart toggle on/off switch is compatible with Alexa Echo and Google Home. REQUIRES AN ALEXA SUPPORTED HUB for voice control with Echo Products. CANNOT connect directly with ECHO PLUS..
- Z-Wave certified gateway: The MS12Z is compatible with Samsung Smartthings, the Wink Hub, and all certified Z-Wave controllers..
- Work with: This Z-Wave enabled universal switch works for most residential lighting control. It supports LED, CFL,incandescent and halogen bulbs. Supported voltage - 120 VAC..
- Wireless control: Turn lights on/off, schedule, or group the light from multiple switches all with a smartphone app, automatically turn lights on when you are home, and off when you are away..
- Installation Requires: hard-wired connections. Neutral wire required for single-pole and 3-way installation Ca This Z-Wave switch works w/existing (dumb) switch for a 3-way wiring scenario..
Check StockGE Enbrighten Z-Wave Plus Dual Smart Plug Dimmer, Polarized Outlets Controlled Together, Built-in Repeater/Range Extender, Zwave Hub Required, Works with SmartThings, Wink, and Alexa, 14280
- ALEXA COMPATIBLE – REQUIRES AN ALEXA SUPPORTED HUB for voice control with Echo Products (Alexa device and hub sold separately). CANNOT connect directly with ECHO PLUS (Only ZigBee products can connect directly to Echo Plus)..
- Requires a Z-Wave certified gateway. Compatible with the following Z-Wave certified Hubs: SmartThings, Wink, ADT Pulse, Trane, Vivint, Nexia, Honeywell, HomeSeer, Harmony Home Hub Extender, Vera, Connect and Iris. Works with Alexa for voice control (hub required.
- Wirelessly schedule, control and adjust the brightness of any two dimmable table or floor lamps from anywhere, at any time – space-saving design does not block second outlet access or obstruct furniture placement..
- Dual outlet smart dimmer features two Z-Wave controlled outlets allowing control of two devices at the same time (cannot be controlled individually)..
- Dimmer customizes lighting output and creates the perfect ambiance for any room – Works with dimmable LED, CFL, halogen and incandescent bulbs.
Check StockGE Enbrighten Z-Wave Plus Smart Outdoor Switch, 1-Outlet Plug-In (2nd Gen.), Weather-Resistant, Works with Alexa, Google Assistant, for Landscape & Seasonal Lighting, ZWave Hub Required, 14298,Black
- ... control Enjoy the convenience of voice control with Google Assistant or Amazon Alexa when connected through a compatible Z-Wave hub..
- Convenient design reduced size from previous outdoor plug-in Z-Wave switches and blends into any setting while the high-quality drop cable is ideal for use with covered outdoor outlets. Dual keyhole brackets offer secure, simple installation options..
- Range extender The switch repeats your Z-Wave signal from your hub or other Z-Wave device to extend your range by up to 150ft. Extended signal range increases your home automation coverage to enhance your control..
- LED, CFL, incandescent and halogen The smart switch is compatible with all types of light sources. Enjoy the full benefit of LED, CFL, incandescent and halogen lights..
- Universal compatibility Z-Wave Plus and all previous Z-Wave generations work together to allow continued expansion of your home-automation network..
Check StockEnbrighten, Light Almond, Plus Smart Receptacle, Compatible with Alexa, Google Assistant, Tamper-Resistant, 1 Z-Wave + 1 Always On Outlet, ZWave Hub Required, 14297
- TAMPER RESISTANT – For increased security, tamper-resistant outlets prevent foreign objects from being inserted any slot individually. The smart device is ideal for homes with pets or small children and protects against common injuries associated with electrical receptacles..
- RANGE EXTENDER – The hardwired outlet repeats your Z-Wave signal from your hub or other Z-Wave device to extend your range by up to 150ft. Extended signal range increases your home automation coverage to enhance your control..
- BULB COMPATIBILITY – For improved versatility, the smart control is compatible with all types of light sources. Enjoy the full benefit of LED, CFL, incandescent and halogen lights..
- UNIVERSAL COMPATIBILITY – Z-Wave Plus and all previous Z-Wave generations work together to allow continued expansion of your home-automation network..
- EASY INSTALLATION – Requires indoor in-wall installation with hardwired connections. NEUTRAL WIRE REQUIRED. Wallplate not included. Operating temperature range 32-104 degrees Fahrenheit..
Check StockAeotec Z-Stick 7 Plus, Zwave Plus USB to Create Z-Wave hub, Gateway Controller with 700 Series ZWave, SmartStart and S2, Works with Raspberry Pi 4, Compatible with Home Assistant
- Works with Raspberry Pi, Windows, Mac, Linux to create a zwave hub for control of Z-Wave and Z-Wave Plus devices..
- German engineered to use Aeotec exclusive Gen7 and 700 series technologies. Offers ZWave SmartStart and S2 security..
- Faster, further. Z-Stick 7 wirelessly transmits up to 250% further in open-place space and with 18% faster CPU.
- Compatible with Z-Wave enabled, home automation software including Home Assistant and Indigo 7. No software included..
Check Stock