Top Z wave Motion Detectors

HomeSeer HSM200 Z-Wave Motion, Temperature and Light Sensor with RGB LED Indicator

  • Z-WAVE PLUS MULTISENSOR: Reports Motion, Temperature, Light Levels With Wireless Z-Wave Commands.
  • ANNUNCIATOR: RGB LED May Be Programmed To Glow 7 Different Colors When Things Happen In Your HomeSeer Controlled Smart Home.
  • LINE POWERED: Just Plug It Into Any 120-Volt US Style Receptacle | No Batteries To Replace.
  • WORKS AS REPEATER: Expands The Range And Performance Of Your Z-Wave Network.
  • COMPATIBILITY: Works with HomeSeer, Hubitat, Home Assistant and SmartThings (with HomeSeer Edge Driver). NOT FOR USE WITH Wink or Vera..
Check Stock

Zooz Z-Wave Plus Q Sensor ZSE11 | Motion, Temperature, Humidity, Light (Hub Required)

  • 4 SMART SENSORS: Get motion alerts and monitor temperature, humidity, and light to take your smart home to the next level. Use this device as the trigger to lighting automations, security alerts, or climate control. It's as versatile and as quick to report as can be. Compatible Z-Wave hub required (sold separately)..
  • FLEXIBLE MOUNT: Use the included mounting bracket to adjust the sensor's field of view and ensure precise monitoring. Power the sensor with batteries (included) or a micro USB cable (sold separately). Always use a single power source only. Works as a Z-Wave repeater when included on USB power..
  • Z-WAVE COMPATIBILITY: Most basic Z-Wave systems aren't advanced enough to display multisensors correctly. The ZSE11 Q Sensor is supported by: SmartThings (with a custom handler, instructions included with the product), Hubitat, Home Assistant, Indigo, Vera, and HomeSeer. Please do NOT buy this device if your hub isn't listed here, it will not be recognized by your system..
  • MINIMAL DESIGN: Simple and modern look to compliment any interior. This sensor is small enough for discreet monitoring of your home, office, or warehouse space..
  • MORE SECURITY: Includes S2 Authenticated Z-Wave security and SmartStart for the safest communication possible. Back by a ....
Check Stock

Aeotec Multisensor 6 with Battery, Z-Wave Plus 6-in-1 Motion, Temperature, Humidity, Light, UV, Vibration Sensor

  • 6-in-1 Zwave MultiSensor: smart motion sensors, z wave humidity, temperature sensor, Zwave light sensor, lux, UV, vibration sensor..
  • Up to 2 year battery life with 2 batteries or power via USB. 1 x CR123A included in the box..
  • Super-small at 1.65 inches. Can be installed in corner, in-wall, on shelf or recessed in ceiling with Recessor accessory..
  • Works with certified Z-Wave gateways and tested with Fibaro, HomeSeer, Indigo 7, openHAB, SmartThings, and Vera..
  • Z-Wave Plus certified. Certification number: ZC10-15070011.
Check Stock

Samsung Electronics F-ADT-STR-KT-1 SmartThings ADT Wireless Home Security Starter Kit with DIY Smart Alarm System Hub, Door and Window Sensors, Motion Detector- Alexa Compatible, White

  • DIY home security system: Easy To Install panel with wireless sensors that can be integrated in minutes with automated Fast Response alarms to instantly notify authorities.
  • On the go mobile control: receive instant updates with text and email alerts and access to advanced system control from your smartphone or computer.
  • 24/7 peace of mind: optional, no contract ADT professional monitoring services with Police dispatch provides unbeatable protection for your family.
  • 4 Piece Bundle: 7 Inch touchscreen ADT security hub, two ADT door and window detectors, and ADT motion detector for complete security solution.
  • Automate your home: works with zigbee, Z Wave, and IP network protocols and a wide range of smart devices including cameras, lights, door locks, thermostats (Alexa & Google home compatible).
  • NOTE : KINDLY REFER THE USER GUIDE AVAILABLE BELOW & VIDEO AVAILABLE BELOW THE IMAGES FOR ANY ASSISTANCE.
Check Stock

Aeotec Multisensor 6 & Ceiling Recessor, Z-Wave Plus 6-in-1 Motion, Temperature, Humidity, Light, UV, Vibration Sensor, Battery included

  • 6-in-1 Zwave MultiSensor: smart motion sensors, z wave humidity, temperature sensor, Zwave light sensor, lux, UV, vibration sensor..
  • Up to 2 year battery life with 2 batteries or power via USB. 1 x CR123A included in the box..
  • Super-small at 1.65 inches. Can be installed in corner, in-wall, on shelf or recessed in ceiling with provided Recessor accessory..
  • Works with certified Z-Wave gateways and tested with Fibaro, HomeSeer, Indigo 7, openHAB, SmartThings, and Vera..
  • Z-Wave Plus certified. Certification number: ZC10-15070011.
Check Stock

Zooz Z-Wave Plus S2 Motion Sensor ZSE18 with Magnetic Mount, Works with Vera and SmartThings

  • EXTRA FEATURES: Adjustable motion sensitivity and retrigger time. Built-in Z-Wave range test tool for easier network troubleshooting. Vibration reports on SmartThings and other selected gateways..
  • 2 POWER SOURCES: Runs on a single battery for up to a year (depending on traffic and settings) OR on micro USB cable (NOT INCLUDED). Acts as signal extender when connected to USB..
  • FLEXIBLE DESIGN: Extremely small and light, the sensor sits in a perfectly shaped magnetic mounting base for precise and firm positioning..
  • CERTIFIED SECURE: Uses the latest S2 Z-Wave protocol and AES-128 signal encryption. Z-Wave Plus chip for longer range and increased battery life..
Check Stock

Minelab Gold Monster 1000 Universal Metal Detector with 2 Search Coils, Waterproof

  • KIT INCLUDES: Minelab Gold Monster 1000 Metal Detector | 10x6" DD Waterproof Search Coil | 5" DD Waterproof Search Coil | Headphones | Lithium-Ion Battery | 8 x AA Batteries | Lens Cleaning Cloth | Minelab 2 Year Control Box & Coil Warranty.
  • 45 KHZ VLF & 24-BIT SIGNAL PROCESSOR: This primary combination greatly boosts sensitivity to gold beyond that of other single frequency VLF detectors over a wide range of nugget sizes, without introducing excess noise and false signals..
  • IMPROVED DISCRIMINATION: The GOLD MONSTER 1000 also has improved ferrous/non-ferrous discrimination and copes better with conductive (salty) soils than higher frequency detectors, making it the perfect choice to maximise your gold recovery..
  • VERY LOW FREQUENCY: VLF (Very Low Frequency) is a conventional single frequency sine wave continuous transmission technology. This is the traditional type of technology used in most basic metal detectors. Single frequency sine wave detectors create an electro-magnetic field, which is transmitted into the ground in a continuous wave. The receive signal processing has improved enormously. ​.
Check Stock

FIBARO Motion Sensor Z-Wave Plus Multisensor-Movement Temperature Light Intensity Accelerometer FGMS-001 doesn t work with HomeKit

  • All you need: dependable motion alerts, quick light reports, real-time temperature readings, and vibration notifications sent straight to your z-wave....
  • And more: all data is transmitted to your system using encrypted signals, protected by tamper alerts. With the multifunctional led, you can access....
  • Hub required: this sensor will work beautifully with any open z-wave system like smart things, Vera, nexia, home center lite, or home seer. It is not....
  • Ultra small: install the smallest 4-in-1 sensor anywhere without ruining the view. It attaches to any flat surface with a single screw or a piece of....
  • You're covered: this is a z-wave plus certified and ul listed device created and built in Europe from quality materials. Support portal and....
Check Stock

Aeotec Range Extender 6, Z-Wave Plus repeater

  • Z-Wave Plus wireless signal repeater and range extender. Compatible with Z-Wave and Z-Wave Plus..
  • Amplifies and repeats weak signals boosting the range and reliability of weak Z-Wave devices..
  • Plug in to 110 volt wall socket. Small design so it does not block other outlets.
  • Compatible with all Z-Wave gateways including Control4, Fibaro, SmartThings, and Vera..
  • Z-Wave Plus certified. Certification number: ZC10-16095239DescriptionYou use Z-Wave to manage your smart home. You use Range Extender 6 to keep Z-Wave reliable. Aeotec's Range Extender 6 works seamlessly to amplify and repeat weak Z-Wave and Z-Wave Plus signals. Simply plug it into a power socket, connect it to your Z-Wave network, and it automatically starts improving any poor Z-Wave signals that are in range. As it's custom desgined as a wireless signal booster, Range Extender 6 performs better than other Z-Wave devices that offer simply repeating.
  • it amplifies the signal too. Designed to use Z-Wave Plus, unlike previous editions Range Extender 6 can work with advanced Z-Wave features such as encryption and security devices such as door locks while remaining compatible with older versions of Z-Wave. It repeats signals 250% faster than other signal repeaters and can repeat Z-Wave signals up to 492....
Check Stock

GoControl WD500Z-1 Z-Wave 500-Watt Wall-Mount Dimmer Switch

  • Z-wave & Manual Control For Connected Lights.
  • White.This device requires a neutral connection.
  • Easily replace existing standard switch to add a Z-Wave controlled lighting dimmer. Compatible with any Z-Wave certified gateway.
  • Linear Z-Wave products provide up to 100 feet range between the wireless controller and/or the closest Z-Wave device.
  • Linear has been providing best-in-class home & business control solutions for over 50-years and is a leading worldwide mfg.. of Z-Wave products.
  • Compatible with incandescent and most dimmable fluorescent, halogen, Xenon and LED fixtures and The wires are pre-cut for easy stripping..
Check Stock

GoControl/Linear GD00Z-4 Z-Wave Garage Door Opener Remote Controller, Small, Black

  • Go Control z-wave products provide up to 100 feet range between the wireless controller and/or the closest z-wave device.
  • Nortek security & control/Go Control has been providing best-in-class home & business control solutions for over 50-years and is a leading worldwide mfg. . of z-wave products.
  • Garage door position sensor frequency: 345 MHz.
  • This product requires the use and pre-installation of a Z wave HUB..
  • Add Z-Wave control to your current garage door opener. Compatible with virtually any automatic garage opener w-sectional garage door.
  • Linear Z-Wave products provide up to 100 feet range between the wireless controller and/or the closest Z-Wave device.
  • Provides both audible and visual warnings prior to door movement.
  • Linear has been providing best-in-class home & business control solutions for over 50-years and is a leading worldwide mfg.. of Z-Wave products.
  • Specifications - Power: 120VAC, 50/60 Hz, Garage door position sensor frequency: 345 MHz, Z-Wave Frequency: 908.42 MHz.
Check Stock

Peanut Butter SmartSticks 3 Pack Bundle

  • LATEST Z-WAVE TECH: SmartStick+ Includes a 700 Series Z-Wave Module (v7.17x firmware) and is Z-Wave Plus V2 Certified.
  • SUPPORTS Z-WAVE S2 SECURITY: Includes Smart Start Inclusion (Requires Smart Start Compatible Hub or Software).
  • Z-FLASH COMPATIBLE: Works Nicely with HomeSeer Z-Flash OTA Firmware Updater.
  • Z-WAVE PLUS (V2) PERMORMANCE: Longest Range, Fastest Transmission Speed, Best Bandwidth.
  • SUPPORTS NETWORK BACKUP & RESTORE: Easily restore or move your network to another SmartStick+ (requires HomeSeer hub).
Check Stock