Top Zinc Plated Hex Head Screws
Glvaner M6-1.0mm (100 pcs) Thread Size Stainless Steel Hex Nuts Hexagon Nuts Plain Finish Full Thread
- Material: 304 stainless steel (A2-70) and no exterior finish, greater strength and corrision resistance performance than regular stianless steel or zinc plated fasteners..
- Feel free to contact us if you have no idea about what size to choose..
- Hex nut is most commonly used nut, normally installed to the end of a bolt or other precision screws. You could also find the matched screws with different head types in our shop..
Check Stock#8 x 1/2\ Hex Washer Head Self-Drilling Tek Screw Zinc Plated Steel for Attaches Sheet Metal Steel or Steel to Metal - Box of 100
- HIGH QUALITY ZINC PLATED STEEL: Made of 100% high quality durable steel with hard zinc plating, built to last years with no wear and tear.
- RUST RESISTANT: Zinc Plating provides an excellent corrosion resistant shell for a long lasting cost effective fastener.
- CONVENIENCE: Hex Washer Head Sheet Metal Screws are known to be convenient and versatile. Great to have while working with sheet metal environment. Suitable for indoor and outdoor applications.
- For use in Steel, Sheet Metal, and attaches Metal or Steel to Metal or Sheet Metal Steel. Installed with 1/4" Hex Driver.
- Amazon Protected Money-Back Satisfaction Guaranteed.
Check StockHilitchi 100-Pcs M6 x 15/20 / 25/30 / 35mm Zinc Plated Hex Drive Socket Cap Furniture Barrel Screws Bolt Nuts Assortment Kit for Furniture Cots Beds Crib and Chairs
- ★ High Quality Zinc Plated Furniture Bolts Screws Nuts Kit.
- Barrel Nuts Size: Total Length 12 mm / 0.47”, Outer Diameter: 9.5mm / 0.37”, Threaded Hole Diameter 6 mm/ 0.24”.
- Size Include: M6 x 15mm / 20mm / 25mm / 30mm / 35mm.
- ★ Package Content: 100-Piece / 50 Pairs (Include 50pcs M6 Barrel Nuts).
- ★ The Bolts for Joining Wood, Boards, Kitchen Worktops, Cabinets, Cupboards and A Variety of Other DIY Projects..
Check StockGlarks 280Pcs Internal Tooth Starlock Push On Locking Washers Speed Clips Fasteners Assortment Kit
Check StockGlvaner (10 Sets) M10-1.5 x 25mm Thread Length Flat Round Head Socket Head Cap Screws with Hex Locknuts 304 Stainless Steel Furniture Screws Projects
- Package Includes: 10 Pcs M10 Screws and 10 Pcs M10 Hex Locknuts.
- Material: 304 stainless steel (A2) and no exterior finish, greater strength and corrision resistance performance than regular stianless steel or zinc plated fasteners..
- Included 10 pcs free same size M10 Hex Locknuts to help save your time and money to find nuts.The locknuts are also made of 304 stainless steel and could be found seperately in our shop for your needs..
Check StockEl Tornillo Y La Tuerca
- ... machine screw: Screw: 25pcs 8-32*1 1/2", 25pcs 8-32*3/4", 25pcs 8-32*1/2", 100pcs flat washers, 100pcs nuts.
- B. 6-32 machine screws: Screw: 25pcs 6-32*1 1/2", 25pcs 6-32*3/4", 25pcs 6-32*1/2", 100pcs flat washers, 100pcs nuts.
- √ [Reliable Zinc-Plated Steel. More Than 20 Years of Experience in Fastener Tool Production] Knob and Pull machine screws are zinc-plated steel construction. Zinc-Plated Truss Head Combo Drive Cabinet and Knob Screws will provide durability and corrosion resistance..
- [Purpose] Assorted nuts and bolts suitable for common project applications: renovation, fence, storage, cabinet, frame and DIY projects. Commonly used in machinery and electrical appliances. Connect the knob or knob to the surface of the cabinet door or drawer..
- √ [Come With A High Hardness Storage Box, Easy To Use And Storage, More Tidy] 100% brand new pan head nut and bolt, all screws and nuts are packed in a compact box and can be viewed through a separate plastic box. Easy to install and durable..
Check Stock100PCS M7x50mm Hex Socket Countersunk Head Self Tapping Connecting Screws Allen Flat Head Furniture Confirmat Screws Carbon Steel Zinc Plated
- COUNTERSUNK HEAD: The design of the head allows an aesthetic and permanent connection and a perfect connection of the screw with the furniture panel..
- DESIGN: Have a large shoulder under the head that locks the screw into the wood and prevents pulling through into softer materials. It have a blunt point, need to make a 7mm hole and then screw in..
- DURABLE SCREWS: Connecting screws can be removed and reinstalled several times without loss of holding power..
- WIDE APPLICATIONS: Mainly used in the furniture industry, such as cabinets, chairs, or other types of the box construction, etc.
- PACKAGE & MATERIAL: 100pcs M7x50mm flat head hex socket confirmat style self tapping connecting screws. Made of carbon steel material, zinc plated surface, sturdy and durable..
Check StockHeavy Duty Leveler Legs w/Lock Nuts - Leveling Feet for Furniture, Cabinets, & Workbench - 4 Pack
- YOU GET - 4 Legs, 16 Installation screws (#10 x 3/4"), 5mm hex wrenchDescriptionGot a 8,000 lb. workbench that needs leveling?... Read On!.
- D.H.S. is pleased to offer a leveler that's tough as nails, but as easy to install as it is to adjust..
- Housings are made from 14 ga. (.080"), zinc plated steel. Each has a 7/16" wide ledger that hooks under the cabinet. This ensures the load gets carried directly on the leveler, not the screws. BTW the screws we provide are no joke. They're 3/4" long #10 Philips head (nickel plated), perfect for supporting a bookcase with plywood sides or a workbench with 4 x 4 legs..
- The legs have a 10mm dia. (a heavy 3/8") shaft that adjusts from 0" to 2-1/2". The feet are 1-1/4" dia. and spin freely on the threaded shaft. This allows them to tilt if your floor is really bad. Adjustments are easier too, as you won't be fighting the friction of the entire foot rubbing against the floor as it's being turned. Black polyethylene caps protect your floor and block any moisture from getting to the foot..
- These are a MUST for the workshop or garage, especially if vibrating equipment is involved. Just level the piece out and then snug the nuts up against the bottom ....
Check StockMicro Traders 100PCS M7x70mm Hex Socket Countersunk Head Self Tapping Connecting Screws Allen Flat Head Furniture Confirmat Screws Carbon Steel Zinc Plated
- COUNTERSUNK HEAD: The design of the head allows an aesthetic and permanent connection and a perfect connection of the screw with the furniture panel..
- DESIGN: Have a large shoulder under the head that locks the screw into the wood and prevents pulling through into softer materials. It have a blunt point, need to make a 7mm hole and then screw in..
- DURABLE SCREWS: Connecting screws can be removed and reinstalled several times without loss of holding power..
- WIDE APPLICATIONS: Mainly used in the furniture industry, such as cabinets, chairs, or other types of the box construction, etc.
- PACKAGE & MATERIAL: 100pcs M7x70mm flat head hex socket confirmat style self tapping connecting screws. Made of carbon steel material, zinc plated surface, sturdy and durable..
Check Stockiexcell 300 Pcs SAE 1/4-20 UNC Stainless Steel 304 Hex Socket Button Head Cap Screws Bolts Washers Nylon Inserted Self-Locked Hex Lock Nuts Assortment Kit
- ✔ Includes 100 Pcs, 10 Sizes, Hex Socket Button Head Cap Screws: 1/4-20 x 3/8, 1/4-20 x 1/2, 1/4-20 x 5/8, 1/4-20 x 3/4,1/4-20 x 7/8, 1/4-20 x 1, 1/4-20 x 1-1/4, 1/4-20 x 1-1/2, 1/4-20 x 1-5/8, 1/4-20 x 2.
- Screw Head Style : Button, Screw Drive Style: Internal Hex drives, Known as Hex Socket Drives, Hex Size: 5/32", Head Diameter : 7/16", Head Height : 1/8", Thread Pitch : 20 TPI, Thread Dia. : 1/4".
- ✔ Includes 100 Pcs, 1/4-20 ANSI/ASME B18.16.6 Self-Locked Hex Lock Nuts, Nylon Inserted, Self Locking, Loose Unexpected Will NOT Occur.
- ✔ Includes 100 Pcs Φ1/4 Inches Washers: Add More Touch Area to Meet Special Condition In Some Cases and Protect Parts from Being Damaged.
- ✔ Includes 1 Pcs Hex Key, Hex Size: 5/32", to Drive These Screws Conveniently and Easily..
- ✔ Material of Screws, Nuts and Washers: Stainless Steel 304, High Strength and Anti-corrosion in Various Environments ✔ Material of hex key: chrome-vanadium steel, nickel plated✔ Package: All These Screws, Nuts, Washers and Hex Key Packed In a Sturdy Easy-use Plastic Storage Case, Organized Conveniently and Easily.
Check Stockiexcell 900 Pcs Metric M3/M4/M5 x 8/10/12/16/20 Alloy Steel 10.9 Grade Hex Socket Button Head Cap Screws Bolts Nuts Washers Assortment Kit, Black Oxide Finish
- ✔ Includes 300 Pcs, 15 Sizes, Hex Socket Button Head Cap Screws: M3 x 8, M3 x 10, M3 x 12, M3 x 16, M3 x 20, M4 x 8, M4 x 10, M4 x 12, M4 x 16, M4 x 20, M5 x 8, M5 x 10, M5 x 12, M5 x 16, M5 x 20.
- Screw Drive Style: Internal Hex Drives, Known as Hex Socket Drives, Hex Size: 2.0 mm(M3), 2.5 mm(M4), 3.0 mm(M5).
- ✔ Includes 300 Pcs, 3 Sizes Nuts, M3-P0.5, M4-P0.7, M5-P0.8, Meet Different Applications.
- ✔ Includes 300 Pcs, 3 Sizes Washers, Φ3, Φ4, Φ5: Add Touch Area to Meet Special Condition In Some Cases and Protect Parts from Being Damaged.
- ✔ Includes 3 Pcs Hex Key: 1 Pcs Hex Size: 2.0 mm for M3 Screws, 1 Pcs Hex Size: 2.5 mm for M4 Screws, 1 Pcs Hex Size: 3.0 mm for M5 Screws, to Drive These Screws Conveniently and Easily.
- ✔ Material of Screws: Alloy Steel, Black Oxide Finish, High Strength And Anti-rust.
- Strength Grade: 10.9 Grade, Tensile Strength: 1040N/mm², Hardness: HRC 32-39 ✔ Material of Nuts and Washers: Alloy Steel, Black Oxide Finish ✔ Material of Hex Key: Chrome-Vanadium Steel, Nickel Plated, Higher Strength And Anti-rust ✔ Package: These Screws, Nuts, Washers and Hex Keys Packed In a Sturdy Easy-use Plastic Storage Case, Organized Conveniently and Easily.
Check StockArchitectural Mailboxes 5525P 53\ In Ground Mailbox Post, Pewter
- Accommodates 1-mailbox (duo, tri or quad spreader plates available separately).
- Designed with a 4 in. square cross-section of heavy-gauge steel tubing with a mounting plate welded on top.
- Commercial grade, powder-coated pewter finish.
- Includes 4 zinc-plated steel hex-head bolts 3/8 in. - 16 thread size, 1 in. L, 4 zinc-plated 3/8 in. thread size nuts and zinc-plated washers.
Check Stock