Top Zinc Plated Steel Conduit Locknuts

Manufacturer Morris Products Codes 17454 Post Base Channel 4 Hole Square – for 1-5/8” Strut – Side Orientation, Galvanized Steel – 6” x 6” Base – Pack of 3

  • Material:Conduit hangers are made of zinc-plated iron,durable to use..
  • Conduit hanger ensure that the rigid conduit and EMT conduit are securely secured to the mounting surface..
  • High-quality and durable conduit hangers with bolt..
  • Used to secure and suspend EMT, rigid conduits from overhead supports..
Check Stock

1/2 Npt Nonmetallic Liquid-Tight 180-Degree Electrical Conduit Connector Fitting,,UL Listed, (6 PACK) (1/2-180D)

  • THESE non-metallic connectors are molded from nylon 6 type, flammability rating 94V-2: temperature index 125 ° C.
  • NO disassembly is required, simplifying the installation of the wire, the installer can simply tighten the dome sealing nut by pushing the conduit or pipe onto the ferrule.
  • O-RINGS and steel locknuts for indoor and outdoor use, complete conduit / connector system reusable.
  • METAL connectors are resistant to salt water, weak acids, gasoline, alcohol, oil, grease and common solvents.
Check Stock

1-1/2inch Nonmetallic Liquid-Tight Electrical Conduit Connector Fitting,,UL Listed, (2 PACK) (1-1/2inch 180d)

  • THESE non-metallic connectors are molded from nylon 6 type, flammability rating 94V-2: temperature index 125 ° C.
  • NO disassembly is required, simplifying the installation of the wire, the installer can simply tighten the dome sealing nut by pushing the conduit or pipe onto the ferrule.
  • O-RINGS and steel locknuts for indoor and outdoor use, complete conduit / connector system reusable.
  • METAL connectors are resistant to salt water, weak acids, gasoline, alcohol, oil, grease and common solvents.
Check Stock

Canomo Silver Finish Make-A-Lamp Kit 3-Way with 8 Inch Harp, 2 Pieces 12" Lamp Pipe, and All Parts Needed and Instructions for DIY Lamp Design or Repair…

  • Include a 3-Way turn knob socket, 8 inch silver detachable harp, 8 foot UL listed clear cord set, finial, lamp pipe kit and all hardware. Includes instructions for wiring..
  • Silver finish socket has optional side hole in bottom cap in case you cannot run wire through your lamp base..
  • Contains two each: 1/8-IP x 12″ threaded pipe, 1/8-IP couplings, 1/8-IP locknuts, 1/8-IP knurled locknuts, washers.
  • Great for DIY projects and for repair and replacement of broken, tarnished or silver lamp parts..
  • Create a custom lamp with your own lamp base or re-wire a lamp with our new parts kit..
Check Stock

Canomo Antique Brass Finish Make-A-Lamp Kit 3-Way with 8 Inch Lamp Harp, 2 Pieces 12" Lamp Pipe, and All Parts Needed and Instructions for DIY Lamp Design or Repair

  • Contains two each: 1/8-IP x 12″ threaded pipe, 1/8-IP couplings, 1/8-IP locknuts, 1/8-IP knurled locknuts, washers.
  • Great for DIY projects and for repair and replacement of broken, tarnished or lamp parts..
  • Antique brass finish socket has optional side hole in bottom cap in case you cannot run wire through your lamp base..
  • Create a custom lamp with your own lamp base or re-wire a lamp with our new parts kit..
  • Include a 3-Way turn knob socket, 8 inch antique brass detachable harp, 8 foot UL listed clear cord set, finial, lamp pipe kit and all hardware. Includes instructions for wiring..
Check Stock

Halex, 1 in. Electrical Metallic Tube (EMT) 2-Hole Strap , 61610B, 50 per pack

  • Secures EMT conduit to wood, masonry or other similar surfaces where load bearing is required.
  • Corrosion resistant for indoor or outdoor use.
Check Stock

Canomo 2 Sets Lamp Making Kit Lamp Wiring Kit with 8 Inch Harp, 2 Pieces 12\ Lamp Pipe, and All Parts Needed and Instructions for DIY Lamp Design or Repair, Black

  • Package Include 2 Packs: 3-Way turn knob socket, 8 inch black detachable harp, 8 foot UL listed blak cord set, finial, lamp pipe kit and all hardware. Includes instructions for wiring..
  • Three-Way Socket Lamp Making/Repair Kit is made of high-quality metal which ensures premium quality and a classic look. The Lamp Kit is UL and CUL safety rated for Indoor location use.
  • Create a custom lamp with your own lamp base or re-wire a lamp with our new parts kit..
  • Contains two each: 1/8-IP x 12" threaded pipe, 1/8-IP couplings, 1/8-IP locknuts, 1/8-IP knurled locknuts, washers.
  • Great for DIY your own lamp and for repair and replacement of broken, tarnished or lamp parts..
Check Stock

Canomo Black Finish Make Lamp Kit Lamp Lighting kit 3-Way with 8 Inch Harp, 2 Pieces 12\ Lamp Pipe, and All Parts Needed and Instructions for DIY Lamp Design or Repair

  • Package Include a 3-Way turn knob socket, 8 inch black detachable harp, 8 foot UL listed black cord set, finial, lamp pipe kit and all hardware. Includes instructions for wiring..
  • Three-Way Socket Lamp Making/Repair Kit is made of high-quality metal which ensures premium quality and a classic look. The Lamp Kit is UL and CUL safety rated for Indoor location use.
  • Create a custom lamp with your own lamp base or re-wire a lamp with our new parts kit..
  • Contains two each: 1/8-IP x 12" threaded pipe, 1/8-IP couplings, 1/8-IP locknuts, 1/8-IP knurled locknuts, washers.
  • Great for DIY your own lamp and for repair and replacement of broken, tarnished or lamp parts..
Check Stock

Klein Tools D333-8 Conduit Locknut and Reaming Pliers

  • Pliers tighten 1/2-Inch (13 mm) and 3/4-Inch (19 mm) EMT or 1/2-Inch (13 mm) rigid locknuts.
  • Reams and smoothes both inside and outside of conduit.
  • Knurled jaws at nose tip pull wire or fish tape and machined nose fits snugly into locknut wings.
  • Forged in the USA with custom, US-made tool steel for maximum durability.
Check Stock

1/4 -20 Nylon Insert Hex Lock Nuts Allen Hex Drive 304 Stainless Steel 18-8 Full Thread Coarse Thread UNC Pack of 25

  • Package: 25 PCS 1/4"-20 Nylon Insert Hex Stainless Locknuts.
  • Made of 304 Stainless Steel (no coating outside) which is superior to regular steel and any zinc plated fasteners, provides good strength and corrosion resistance in bad environments..
  • Will NOT COME LOOSE: With a nylon insert inside, the lock nuts greatly reduce loosening under vibrations and torque..
Check Stock

Morris Products 2 Hole EMT Pipe Strap – 1/2 Inch - Secures EMT Conduit - Zinc-Plated Steel - Reinforced Rib, Holes – Snap-On Installation – 100 Pieces

  • SECURE CONDUIT: Ensure that your conduit is safely secure with these 2-hole EMT Pipe Straps that feature reinforced holes and a reinforced rib for extra strength..
  • DURABLE CONSTRUCTION: Morris Products’ EMT Pipe Straps are manufactured from zinc-plated steel for ultimate durability. Each pipe strap is cULus listed..
  • SIZE AND QUANTITY VARIETY: Choose the exact size you need with the variety from Morris Products that includes ½”, ¾”, 1”, 1 ¼”, 1 ½” and 2”. Quantities range from 5 EMT pipe straps to 100 in each pack..
  • SIMPLIFIED INSTALLATION: Take less time to complete each task with the snap-on installation of these EMT pipe straps that easily secure EMT conduit..
  • COLLECTION OF COMPREHENSIVE ELECTRICAL TOOLS: Morris Products is proud to feature a variety of electrical tools and applications that range from wire connectors and non-insulated ferrule to nylon cable ties and cable splicers..
Check Stock

Rubber Cushion Strut Clamp 1" NOM (1-1/8" OD) for Mounting Copper Piping, PEX Pipe, CVPC Tubing to Strut Channels [5 Pack]

  • [QUALITY] Zinc plated to prevent corrosion, the heavy duty steel strut clamp brackets with attached bolt and nut clamp securely over a hard rubber cushion to nearly surround the sides of a pipe or tube..
  • [PROTECTIVE RUBBER CUSHION] The hard rubber cushion protects pipe and tube by absorbing shock caused by vibration and temperature changes, reduces unwanted noise, insulates pipe and tubing from metal surfaces, and prevents galvanic corrosion..
  • [APPLICATION] Insert pipe or tube into rubber cushion inside steel strut brackets. Mount strut clamp legs to 1" NOM (1-1/8" OD) strut channels. Attach nut to bolt and tighten..
  • [CONTENTS] Each of the 5 clamps contain two heavy duty zinc plated steel half brackets with attached bolt, a nut, and protective rubber cushion..
  • [VERSATILE] Use for 1" NOM (1-1/8" OD) copper pipe, PEX pipe, CPVC tube, and other conduit tube, hose, and wire applications. Can be hung vertically and horizontally on walls and ceilings. Compatible with unistruts in 1-5/8", 7/8", 13/16" heights..
Check Stock