Top boring Bar Clamping System

BESSEY KRE3550 PAIR 50' K Body REVO Parallel Bar Clamp Now With Hex Key Clamping

  • Two (2) 50" KRE3550 clamps: 50" of clamping capacity, a 3-3/4" throat depth, a 10" to 52-1/2" spreading capacity, and up to 1700 lbs. of clamping force!.
  • Newly-designed 2-part handle can receive a hex key or driver in its end to provide more clamping force if desired, or just easier clamping for those who have issues with wrist strength..
  • Improved operating jaw design means once you put it in place, it stays in place and is ready for clamping..
  • Comes equipped with three removable pressure caps for the clamping surfaces that are glue-, paint-, and solvent-resistant and help provide protection for delicate work-pieces.
  • and two adjustable and removable work-piece supports on the bar prevent any contact between the bar and your project..
  • Easily converts to spreader without tools!.
Check Stock

BESSEY KRE3531 PAIR 31' K Body REVO Parallel Bar Clamp Now With Hex Key Clamping

  • Two (2) 31" KRE3531 clamps: 31" of clamping capacity, a 3-3/4" throat depth, a 10" to 36-1/2" spreading capacity, and up to 1700 lbs. of clamping force!.
  • Newly-designed 2-part handle can receive a hex key or driver in its end to provide more clamping force if desired, or just easier clamping for those who have issues with wrist strength..
  • Improved operating jaw design means once you put it in place, it stays in place and is ready for clamping..
  • Comes equipped with three removable pressure caps for the clamping surfaces that are glue-, paint-, and solvent-resistant and help provide protection for delicate work-pieces.
  • and two adjustable and removable work-piece supports on the bar prevent any contact between the bar and your project..
  • Easily converts to spreader without tools!.
Check Stock

BESSEY KRE3524 PAIR 24' K Body REVO Parallel Bar Clamp Now With Hex Key Clamping

  • Two (2) 24" KRE3524 clamps: 24" of clamping capacity, a 3-3/4" throat depth, a 10" to 28-3/4" spreading capacity, and up to 1700 lbs. of clamping force!.
  • Newly-designed 2-part handle can receive a hex key or driver in its end to provide more clamping force if desired, or just easier clamping for those who have issues with wrist strength..
  • Improved operating jaw design means once you put it in place, it stays in place and is ready for clamping..
  • Comes equipped with three removable pressure caps for the clamping surfaces that are glue-, paint-, and solvent-resistant and help provide protection for delicate work-pieces.
  • and two adjustable and removable work-piece supports on the bar prevent any contact between the bar and your project..
  • Easily converts to spreader without tools!.
Check Stock

YG-1 P15202 Spade Drill Straight Shank Holder, Straight Flute, 0.318\ Shank Diameter, 31/32\-1-3/8\ Drill Insert Range

  • ☞This product is the main accessory of coordinate boring machine, horizontal boring machine, ordinary boring and milling machine, boring and milling CNC machine tools. It can be used for boring, boring outer circle, boring end face, boring stepped hole, boring inner hole end face, cutting inner hole and ring groove on outer circle, etc..
  • ☞Precise control and free adjustment: The scale of the dial is clear, and the circle is divided into 100 equal parts. The movement of each scale is 0.005mm, the diameter is 0.01mm, and the operation is simple..
  • ☞Select material with high hardness. Using 40CrMo material, it has strong rigidity, special surface treatment, high hardness, good seismic performance, suitable for high speed, and guarantees the density of hole processing..
  • ☞The boring range of the complete set of boring tools: 10-150mm, and the diameter of the boring tool bar is 50mm. Precision fine-tuning: 0.01mm (one revolution of 0.02mm), adjustable stroke 20mm. The boring bar easily and directly enters the boring head hole..
  • ☞The refined boring bar is made of alloy steel, which has strength and toughness, good hardenability, and no obvious temper brittleness. After quenching and tempering, it has obvious impact resistance. The taper design of the b....
Check Stock

Phimosis Stretching Rings kit (3 mm to 38 mm) - Includes 20 Rings

  • ✔Product Name: Bore 7/8" Two-Piece Clamping Shaft Collar Carbon Steel.
  • ✔ID: 7/8", Outside Diameter: 1-5/8", Height: 1/2",With 1/4-28 Set Screw.
  • ✔Package Content: 4-Pieces 7/8" Double Split Shaft Collars with 4Pcs Set Screw.
  • ✔it's suitable for use in various applications, including in the manufacturing industry to locate components on a conveyor belt system, the automotive industry to situate components in automobile power steering assemblies, and the hobby craft industry to hold wheels on axles in remote control vehicles, and so on..
Check Stock

Jeremywell 1' Bore Double Split Shaft Collar Black Oxide Set Screw Style (4 PCS)

  • Style: Two-Piece Clamping Collar, Double Split.
  • This shaft collar is suitable for use in various applications, including in the automotive industry to situate components in automobile power steering assemblies, the manufacturing industry to locate components on a conveyor belt system, and the hobby craft industry to hold wheels on axles in remote control vehicles, among others..
  • Corrosion resistance (Black oxide painting ) Applicable to both soft or hard shaft material, Easy to mount..
Check Stock

Double Split Shaft Collar 1\ Bore Width 1/2 Inch Oxide Set Style Black (2 Pcs)

  • Double Shplit Shaft Collar 1" Bore Width 1/2 Inch Oxide Set Style Black (2 Pcs).
  • Product Name : Bore 1" Two-Piece Clamping Shaft Collar Carbon Steel.
  • Outside Diameter : 1-3/4"(1.75 Inch/ 44.45mm).
Check Stock

Jeremywell 5/8\ Bore Double Split (0.63) Shaft Collar Black Oxide Set Screw Style (4 PCS)

  • Style: Two-Piece Clamping Collar, Double Split.
  • This shaft collar is suitable for use in various applications, including in the automotive industry to situate components in automobile power steering assemblies, the manufacturing industry to locate components on a conveyor belt system, and the hobby craft industry to hold wheels on axles in remote control vehicles, among others..
  • Corrosion resistance (Black oxide painting ) Applicable to both soft or hard shaft material, Easy to mount..
Check Stock

Summit Collars Double Split Shaft Collar 3/4\ Bore OD 1-1/2 Oxide Set Screw Style | Black | Pack 4 Pieces

  • Specification - Bore 3/4 Inch Double Split Shaft Collar Oxide Set Screw Style Pack of 4PCS.
  • Product Name - Bore 3/4" Two-Piece Clamping Shaft Collar Carbon Steel.
  • Sizes - Bore Diameter: 3/4" (0.75 Inch / 19.05mm).
  • Outside Diameter : 1-1/2"(1.5 Inch/ 38.1mm).
Check Stock

Jorgensen Cabinet Master 24-inch 90° Parallel Jaw Bar Clamp, 2-pack…

  • Tips: The jaws are not parallel when opened, they are preset by an inclination of +/-0.5°, when you tight up and clamp the items, the clamps will be parallel..
  • Perfect Parallel jaw design for, 90-Degree clamping of materials, glue-ups of materials, general purpose clamping of wood, composites, plastics, light metals, and mixed materials, can be attached to work surfaces using this clamp..
  • Deep 3-3/4 inch jaw depth for optimized pressure distribution. Secure locking system prevents jaws from slipping. Features ergonomic designed 2 component molded soft grip handle..
  • Rapid action jaw opening and closing, simple raise handle away from steel rail and slide moveable jaw to desired point, reverse movable jaw for spreading..
  • This Jorgensen bar clamp set is ideal for flat panel, box, cabinet, frame and panel doors assemblies or any other project that requires squareness or evenly applied pressure..
Check Stock

KZNANZN Double Split Shaft Collar 1\ Bore Width 1/2 Inch Oxide Set Style Black (4 Pcs)

  • ✔Product Name: Bore 1" Two-Piece Clamping Shaft Collar Carbon Steel.
  • Outside Diameter: 1-3/4"(1.75 Inch/ 44.45mm).
  • ✔Package Content: 4-Pieces 1" Double Split Shaft Collars with 4Pcs Set Screw.
  • ✔it's suitable for use in various applications, including in the manufacturing industry to locate components on a conveyor belt system, the automotive industry to situate components in automobile power steering assemblies, and the hobby craft industry to hold wheels on axles in remote control vehicles, and so on..
Check Stock

NEW 9 pcs 1/2

  • 9 Piece boring bar set features C-6 carbide for use in harder materials but also works great in aluminum and other soft metals All shanks are held to 0.0000-0.0005" from the nominal diameter and made of special heat treated alloy steel. Shank Diameter- 1/2".
  • Contains: (3) pcs. 5/16" minimum bore (1 ea. 3/4" bore depth x 2-1/4" overall, 1 ea. 1-1/8" x 2-5/8", & 1 ea. 1-1/2" x 3").
  • Contains: (3) pcs. 7/16" minimum bore (1 ea. 1-1/8" bore depth x 2-5/8" overall, 1 ea. 1-11/16" x 3-3/16", & 1 ea. 2-1/4" x 3-3/4"), (3) pcs. 9/16" minimum bore (1 ea. 1-1/2" bore depth x 3" overall, 1 ea. 2-1/4" x 3-3/4", & 1 ea. 3" x 4-1/2").
Check Stock