Top 16mm Nozzle

16 Pieces Brass Misting Nozzles Kit Atomizing Nozzle Kit 0.4 mm Orifice 2 Points 1/4 Inch Lock Misting Nozzles with 4 Pieces Plug for Patio Misting System Outdoor Cooling System Garden Water

  • Package content: comes with 16 x spray seats, 16 x nozzles, 4 x plugs, these spray cooling systems directly use water for spraying and cooling, without electricity, and can save much watering time compared with manual watering, enough for you and your family to use.
  • Brass misting nozzle: 10/24 thread, 0.015 inch/ 0.4 mm orifice, brass body, including self-sealing O-ring, can be applied without any leak-proof tape or sealant, the nozzle can produce very fine fog to cool the air and lower the temperature in the hot summer.
  • Reliable brass: the outdoor misting nozzle tees is made of brass material, which has high efficiency, anti-rust and anti-fog performance.
  • Other parts are made of polypropylene material, with good sealing, no leakage, stable and firm, long service life.
  • Maintenance and cleaning: hard water, lime and calcium may cause clogging of the atomizing nozzle.
  • Dip it in vinegar and warm water to clean the nozzle regularly.
  • When the misting nozzle is blocked by impurities, it can be completely disassembled, which makes it easy to clean.
  • Wide applications: 1/4 inch lock misting nozzles kits are very suitable for agriculture, terraces, greenhouses, swimming pools, lawns, gardens, cooling systems, irrigation (flowers, grass, vegetable watering), balcon....
Check Stock

Makita PR00000034 1-3/8\ Welding Nozzle

  • WELDING NOZZLE SUPPORT: PVC floor round welding nozzle with wheels, can be used with welding wire, with rollers to guide the welding seam straighter..
  • WELDING NOZZLE WITH WHEEL: The welding nozzle with wheel can be directly fixed on the hot air gun. When there is a wheel, the wheel can be directly attached to the gap, and the gap can be filled evenly along the line of the gap, which can solve the manual filling of the weld. The filling is not straight..
  • WELDING ROD SPECIFICATIONS: Hot Air Gun Welding Nozzle can use 3mm/4mm/5mm..
  • WELDING NOZZLE WITH WHEEL ADAPTER: 8mm inner diameter of the heat gun nozzle, which can be matched with any other welding nozzle with an outer diameter of 8mm..
  • MATERIAL: 304 stainless steel alloy, with good corrosion resistance and heat resistance, can withstand high temperatures of 800-1000℃, will not rust, oxidize, and deform under high temperature for a long time. It is an ideal accessory for plastic welding..
Check Stock

Funrous 3D Printer Nozzle Cleaning Kit, Stainless Steel and Brass Compatible with Mk8 Extruder Nozzles 0.2mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm Cleaning Tool for Cr-10, Ender 3/ V2 Ender3 Pro (37 Pcs)

  • Nozzle Cleaning Kit: you will get 32 ​​MK8 nozzles (including 4 hardened steel nozzles, 11 stainless steel nozzles and 17 brass nozzles), 5 nozzle cleaning needles (0.15mm), 5 cleaning brushes (0.15mm), 1 nozzle wrench, 1 L shaped socket wrench and 2 tweezers, sufficient quantity for you to conveniently replace it in time and achieve quality printing.
  • And the input diameters of nozzles are 0.2 mm, 0.4 mm, 0.5 mm, 0.6 mm, 0.8 mm and 1.0 mm.
  • Wide Compatibility of 3D Printer Extruder Cleaning Kit: MK8 extruder nozzle is suitable for 3D printer Makerbot, CR-10, MK8 and RepRap, Ender 3, Ender 2, Prusa I3, Prusa 3 and other 1.75 mm PLA ABS 3D printers.
  • Reliable Material: the mk8 nozzle set is made of quality hardened steel, brass and stainless steel, strong and reliable, with higher hardness and rust resistance, wear resistance, heat resistance, easy to install and replace, serving you for a long life.
  • Useful Nozzle Wrench 3D Printer Kit: the 0.15mm nozzle cleaning needle is made of stainless steel, flexible and sturdy, easy to bend into the nozzle without breaking, and greatly dealing with the blockage of the nozzle at the h....
Check Stock

4 Pcs Soldering Nozzles for Hot Air Gun SMD Rework Station 853d 862d Replacement

  • [Great Compatibility]: 4 Pieces of hot air gun nozzles include 3 round nozzles of 5mm, 8mm and 10mm and 1 square nozzle of 13mm, compatible for 853D, 878D soldering station and other hot air guns, applicable to our soldering station models: YES0367, YES0368, YES0369, YES0370, YES0371, YES0372, YES0373, YES0374, YES0375, any inquiry is welcome.
  • [Practical Usage]: Nozzles of different size and shape are ideal for regulating the hot wind size and shape to heat different kinds of electronic components, 24mm diameter nozzle interface adapts to many hot air guns, easy to be installed.
  • [Useful Lock Screw]: With lock screw for locking the nozzle firmly to avoid hot air flow out from the gap between the nozzle and the heat gun air outlet steel pipe, and reduce temperature irregularity.
  • [Durable Material]: Sturdy and durable metal material not easy to rust and damage, suitable for long time use.
  • [Soldering Nozzle Size]: 3 Round nozzles sizes are 5mm, 8mm, 10mm.
Check Stock

HAKKA BROTHERS 2 in 1 Sausage Stuffer Machines 7LB/3L Sliver

  • Equipped with Two fill rates system , easy to use and quick..
  • 5 different diameter S/S nozzle (Φ10 mm, Φ16 mm, Φ22 mm, Φ32 mm, Φ38 mm)..
  • 3 different size for Churro Maker Parts..
  • All parts that contact food directly are reach up SGS food hygiene standard.
Check Stock

Melonsun 300pcs Foam Cleaning Swab Sticks for Inkjet Printer, Camera, Optical Lens, Guns

  • ... enables the swabs to resist from corrosion during cleaning and make fast absorption of contaminants onto the swab head. Long and sturdy handle provides good control of balance and excellent flexibility, not easy to break..
  • ✅USE for PRINTERS & OPTICAL EQUIPMENT- Great for cleaning and maintenance of inkjet printer nozzle, photo machine nozzle, inkjet printer grating, microscopes, photo machine grating, camera, optical sensors. No static electricity, low volatility, no damage to the nozzle and grating..
  • ✅MULTIPLE USES- More widely use for cleaning printers, electronics, gun, auto and aviation applications, banking machines, gaming machines, A/C vents and vents around your kitchen range..
  • ✅SATISFACTION GUARANTEE- We provide a 100% satisfaction guarantee. If for any reason you are unhappy with our product, just send us a message. Our customer service is available 24/7, and we will quickly respond to any questions or concerns..
Check Stock

Wangdd22 15pc/Set 1.75mm Teflon Throat Tube+0.4mm Extruder Nozzle Print Heads+Heater Blocks Hotend for MK8 Makerbot Anet A8 3D Printer

  • Pack of 5 x 3D Printer Extruder Hotend 30mm Length 1.75mm Nozzle Inputting Tube( for MK8 Makerbot Reprap Prusa I3 3D Printer) and 5 x 3D Printer 0.4mm....
  • 0.4mm Extruder Brass Nozzle Print Head: Color - Golden.
  • Compatibility: compatible with all 1.75mm PLA ABS 3D Printer.
  • Quanlity:15pcs/lot (5 piece 1.75mm Nozzle Inputting Tube,5 piece 3D Printer 0.4mm Extruder Brass Nozzle Print Head,5 piece Heater Blocks Hotend).
Check Stock

Hakka 2 in 1 Sausage Stuffer and Spanish Churro Maker Machines 11LB/5L

  • Equipped with Two fill rates system , easy to use and quick..
  • 5 different diameter S/S nozzle (Φ10 mm,Φ16 mm,Φ22 mm,Φ32 mm,Φ38 mm)..
  • All parts that contact food directly are reach up SGS food hygiene standard..
Check Stock

16 Pieces 3D Printer Nozzle Wrench Cleaning Kit,10 Nozzle Cleaning Pins with Storage Box 2 Tweezers 2 Cleaning Copper Wire Brushes 2 L-Shaped Wrench Tool for 3D Printer Accessories

  • 3D printer nozzle cleaning kit: you will get 10 pieces stainless steel nozzle cleaning pins in 5 sizes, 2 pieces cleaning copper wire brushes in....
  • Nozzle cleaning pins: there are 5 different sizes, including 0.15 mm, 0.25 mm, 0.35 mm, 0.4 mm and 0.5 mm, allowing you to choose according to your....
  • Cleaning copper wire brush: the brush is suitable for 3D printer nozzle hot bed cleaning and rust removal.
  • When you use 3D printer nozzle brush to....
  • Wrench and tweezer: 6 mm 7 mm L-shaped hexagonal wrench tool can be applied for fastening nozzles, and 6 mm wrench is compatible with mk8 nozzle.
  • Quality material: cleaning pins are made of stainless steel, and wire brushes are made of copper wire, sturdy and flexible, not easy to break and....
Check Stock

LEM Products 1219 20-Pound Motorized Sausage Stuffer w/4 Stuffing Tubes Stainless Steel

  • 5 different diameter S/S nozzle (Φ10 mm,Φ16 mm,Φ22 mm,Φ32 mm,Φ38 mm).
  • Equipped with Two fill rates system , easy to use and quick..
  • Pressure release valve controls flow of meat for perfect sausages.
  • All parts that contact food directly are reach up SGS food hygiene standard..
Check Stock

Hakka Brothers Sausage Stuffers and Sausage Makers 15L

  • Equipped with Two fill rates system , easy to use and quick.
  • All parts that contact food directly are reach up SGS food hygiene standard.
  • 4 different diameter S/S nozzle 2/3" inch(16 mm), 5/8" inch(22 mm), 1-1/4" inch(32 mm) and 1-1/2"inch(38 mm).
  • All Stainless Stell Sausage Stuffer (All Stainless Steel Base Plate, Cylinder, Stuffing Tubes & Canister. Piston includes an air release).
Check Stock

Onyehn 22pcs/Lots A8&A2 3D Printer Part Each 5PCS 0.4mm Extruder Nozzle Print Head+1.75mm Teflon Throat Tube+Heater Blocks Hotend for MK8 Makerbot Reprap

  • Pack of 5 x 3D Printer Extruder Hotend 30mm Length 1.75mm Nozzle Inputting Tube( for MK8 Makerbot Reprap Prusa I3 3D Printer) and 5 x 3D Printer 0.4mm....
  • 0.4mm Extruder Brass Nozzle Print Head: Color - Golden.
  • Compatibility: compatible with all 1.75mm PLA ABS 3D Printer.
  • Quantity:22pcs/lot (5x 3D Printer Nozzle Throat Tube 5x Nozzle Print Heads 5x Heater Blocks Hotend 5x M6 nuts 2x Hex Key Wrenches (for MK8 Makerbot....
Check Stock