Top 2 54mm Pitch Connector

ALAMSCN 30 Pairs JST-XH Connector Kit, XH 2.54mm 2/3 / 4/5 Pin Header Male and Female Connectors Plug Adapter with Flat Wire Cable 150mm 24AWG Compatible with JST XH

  • Quantity: 10 x 2pin male plug with cable + 10 x 2pin female plug.
  • 10 x 3pin male plug with cable + 10 x 3pin female plug.
  • 5 x 4pin male plug with cable + 5 x 4pin female plug.
  • 5 x 5pin male plug with cable + 5 x 5pin female plug. 30pairs in total..
  • 24 AWG JST XH 2.54mm 2/3/4/5 pin micro male connector match well with female connector, easy to install and usem, meet your different installation needs..
  • Material: Tinned copper wire, plastic head at each end..
  • Widely used in mini RC helicopter，LED strips，electrical appliances, automobiles, robots, lighting, toys,batteries etc..
Check Stock

uxcell IDC Rainbow Wire Flat Ribbon Cable 16 Pins 148cm Length 2.54mm Pitch Type-C

  • 16 Pins Connector Flat Ribbon Cable, 2.54mm Pitch.
  • Connector Type: Type C (Please refer to the last picture).
  • Easily and directly inserted into PCB. Ribbon cable saves space and time on circuit interconnecting assemblies..
  • The Conductor ribbon cable separate easily for clean terminations with standard wire connectors, jacks and pins..
  • Applying to digital cameras, digital camcorders, laptops, LCD TVs, LCD monitors..
Check Stock

USB Female Type-B Port 4-Pin Right Angle PCB DIP Jack Socket-White 10 Pack by MUZHI

  • As the carrier of the IC chip, the IC connector can replace the chip and PCB board for repeated welding and disassembly without damaging the chip, achieving the effect of saving IC cost and time.
  • When installing,first solder the chip to the IC connector, and then solder the IC connector to the PCB board.
  • when you need to install or replace the chip, directly remove the connection between the IC connector and the PCB board, without changing the chip and connector Connection..
  • Advantages-IC connector has strong vibration and heat resistance, can withstand repeated welding and disassembly, convenient installation, and easy to use.
  • Noted - The spacing and line spacing of the connector holes must be the same as the spacing and line spacing of the chip pins.
Check Stock

uxcell F/F IDC Connector 26 Pin Flat Ribbon Cable 2.54mm Pitch 20 Inch Length

  • Connector Type: 26 Pin Female to Female IDC Connector.
Check Stock

uxcell 2 Pieces FC34P IDC Socket Extension Flat Ribbon Cable, 34Pin 30 cm Length

  • Package Content : 2 x Flat Ribbon Cables.
Check Stock

uxcell IDC Rainbow Wire Flat Ribbon Cable 10 Pins 128cm Length 2.54mm Pitch 2pcs Type-B

  • 10 Pins Connector Flat Ribbon Cable, 2.54mm Pitch.
  • Connector Type: Type B (Please refer to the last picture).
  • Easily and directly inserted into PCB. Ribbon cable saves space and time on circuit interconnecting assemblies..
  • The Conductor ribbon cable separate easily for clean terminations with standard wire connectors and pins..
  • Applying to digital cameras, digital camcorders, laptops, LCD TVs, LCD monitors..
Check Stock

ARCELI Prototype Screw/Terminal Block Shield Board Kit for Arduino MEGA 2560 R3 DIY Soldered

  • PCB: FR-4 fiber glass PCB, dual copper layers, size 120mm x 78mm. Pads grid / pitch 2.54mm / 0.1", hole diameter 0.8mm. Terminal block pitch 3.5mm / 0.138", hole diameter 1.2mm..
  • Terminal Block: Pitch 3.5mm / 0.138" mini terminal blocks, total 84 pins(3pole x24pcs, 2pole x6pcs ). Wire range 26~16AWG, strip length 5mm, screws M2 steel, pin header and cage brass..
  • Female Header Socket: Pitch 0.1"/2.54mm, pin length 15mm / 0.59" Single row 10pin x1pcs, singal row 8pin x 5pcs, dual row 18pin x1pcs..
  • Note: This is not original Arduino product.it only a substitute accessories from ARCELI.
Check Stock

uxcell 17pcs DIP IC Chip Socket Adaptor Round 28 Pin 2.54mm Pitch Dual Row 15.24mm Row Pitch

  • Row to Row Distance(Approx):15.24mm/ 0.6".
  • As the carrier of the IC chip, the IC connector can replace the chip and PCB board for repeated welding and disassembly without damaging the chip, achieving the effect of saving IC cost and time.
  • When installing,first solder the chip to the IC connector, and then solder the IC connector to the PCB board.
  • when you need to install or replace the chip, directly remove the connection between the IC connector and the PCB board, without changing the chip and connector Connection..
  • Advantages-IC connector has strong vibration and heat resistance, can withstand repeated welding and disassembly, convenient installation, and easy to use.
  • Noted - The spacing and line spacing of the connector holes must be the same as the spacing and line spacing of the chip pins.
Check Stock

uxcell 34P 34 Way 2.54mm Pitch F/F IDC Extension Flat Ribbon Cable Gray 66cm Long

  • Connector Type: 34 Pin Female to Female IDC Connector.
Check Stock

uxcell 20pcs DIP IC Chip Socket Adaptor Solder Type 2.54mm Pitch Dual Row 8 Flat Pin 7.6mm Row Pitch

  • As the carrier of the IC chip, the IC connector can replace the chip and PCB board for repeated welding and disassembly without damaging the chip, achieving the effect of saving IC cost and time.
  • When installing,first solder the chip to the IC connector, and then solder the IC connector to the PCB board.
  • when you need to install or replace the chip, directly remove the connection between the IC connector and the PCB board, without changing the chip and connector Connection..
  • Advantages-IC connector has strong vibration and heat resistance, can withstand repeated welding and disassembly, convenient installation, and easy to use.
  • Noted - The spacing and line spacing of the connector holes must be the same as the spacing and line spacing of the chip pins.
Check Stock

QLOUNI Crimping Tools Kit, Dupont Ratcheting Crimper Plier Set with 1094 Pcs 2.54mm Dupont Connectors and 460 Pcs 2.54mm JST-XH Connectors - Male Female Crimp Pins Adaptor Assortment Kit

  • [What You Get] In this crimping tool kit, it include a ratchet crimping tool designed for insulated and non-insulated 0.25-1mm cord pin end terminals,1094 PCS 2.54mm dupont connectors, 460 PCS 2.54mm JST-XH connectors and 5m 10-wire ribbon cable. You can choose what you need for your work..
  • [1094PCS Dupont connectors and 460PCS JST-XH connectors] 1094Pcs 2.54mm Pitch JST SM 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10pin terminals, 18-26 AWG wire assortment kit. 460Pcs 2.54mm JST-XHP 2 / 3 / 4 / 5 / 6 Pin Housing with 2.54mm JST XH Male/Female Pin Header..
  • [Easy to Use] There is a ratcheting mechanism design for this insulated terminals crimping tool, one-hand operation could make a perfect crimp without too much effort. The ratcheting function allows to secure a wire connector while you can insert the wires into the crimp..
  • [High Quality Material] This wire crimper is made of premium industrial grade high strength chrome vanadium steel which is treated with black oxidation, rust and corrosion resistance, strong and durable for long time use. Handle is made of soft rubber..
  • [Widely Application] widely used for speakers, monitors, household appliances, LED lighting, copiers, FAX machines, medical equipment, computers, electronic toys, batteries, circuit boards..
Check Stock

Gikfun 2PCS Flat Ribbon Cable 2.54mm Pitch 2 Row 10 Pin Female to Female Wires IDC Ribbon Connector for Arduino EK1282

  • 2.54MM use for USB ASP ISP JTAG AVR wire IDC Flat Ribbon DATA Cable.
  • Applying to digital cameras, digital camcorders, laptops, LCD TVs, LCD monitors, suitable for most Atmel AVR jtag debuggers, in-system programmers, isp download, etc..
  • Package Content: 2 x 70cm Flat Ribbon Cable 2.54mm Pitch 2 Row 10 Pin Female to Female Wires IDC Ribbon Connector.
  • Ribbon cable saves space and time on circuit interconnecting assemblies. The Conductor ribbon cable separate easily for clean terminations with standard wire connectors, jacks and pins..
Check Stock