Top 2 pc Shaft Low Torque

TEKTON 3/8 Inch Drive Click Torque Wrench (10-80 ft.-lb.) | 24330 & 1/4 Inch Drive Click Torque Wrench (20-200 in.-lb.) | 24320

  • Includes 1-pc. 3/8 in. drive torque wrench.
  • Product manual with torque conversion chart.
  • Wrench emits a click that can be heard and felt when the preset value is reached.
  • High-contrast dual-range scale is easy to read, even in low light.
  • Reversible ratchet head drives in both directions and measures torque in clockwise direction.
  • Includes 1-pc. 1/4 in. drive torque wrench.
Check Stock

Nb Ball Spline Nut 13 mm Bore Dia x 36 mm L

  • Low friction: The ball does not cycle and can achieve rolling motion with minimal friction..
  • High precision linear movement: as part of shaft and nut, the clearance in rotation direction can be adjusted to ensure accuracy..
  • Transferable rotating torque: the ball rolls on the ball groove of the spline shaft and moves in a straight line while transferring the rotating torque..
  • Compact design: even a single shaft mechanism can move in a straight line, while keeping the nut in the direction of rotation without deviation..
  • Large bearing capacity and long service life: Because the rolling surface adopts r-shaped ball groove matching with the ball diameter, the contact area is large, the bearing capacity is strong and the service life is long..
Check Stock

Witproton Ball Splines with Both Ends Stepped and Tapped 13mmX250mm 1pc

  • Low friction: The ball does not cycle and can achieve rolling motion with minimal friction..
  • High precision linear movement: as part of shaft and nut, the clearance in rotation direction can be adjusted to ensure accuracy..
  • Transferable rotating torque: the ball rolls on the ball groove of the spline shaft and moves in a straight line while transferring the rotating torque..
  • Compact design: even a single shaft mechanism can move in a straight line, while keeping the nut in the direction of rotation without deviation..
  • Large bearing capacity and long service life: Because the rolling surface adopts r-shaped ball groove matching with the ball diameter, the contact area is large, the bearing capacity is strong and the service life is long..
Check Stock

CTS Pot, 500k Audio, Long Split Shaft (4 Pack)

  • Genuine CTS pots, the brand used by nearly every American guitar company for half a century!.
  • 500k 10% audio-taper, mimics the logarithmic way humans perceive changes in volume better than any other taper..
  • 24-tooth knurled split-shaft, for 24-tooth plastic knobs that push on. Included brass sleeves convert shafts to quasi solid-shaft, for knobs with setscrews..
  • 3/8-32 bushing thread is 3/8" diameter, 1/2" long. For rear-routed guitars..
  • CTS low torque design (dimpled back) is easy to turn..
Check Stock

TEKTON 1/4 Inch Drive Click Torque Wrench (20-200 in.-lb.) | 24320 & 1/4 Inch Drive Hex Bit Socket Set, 10-Piece (2-8 mm) | SHB90102

  • Product 1: Includes 1-pc. 1/4 in. drive torque wrench.
  • Product manual with torque conversion chart.
  • Product 1: Wrench emits a click that can be heard and felt when the preset value is reached.
  • Product 1: Permanently marked, high-contrast dual-range scale is easy to read, even in low light.
  • Product 1: Reversible ratchet head drives in both directions and measures torque in clockwise direction.
  • Product 2: Includes 10-pc. 1/4 in. drive hex bit sockets: 2, 2.5, 3, 4, 4.5, 5, 5.5, 6, 7, 8 mm.
  • Product 2: S2 steel bit is press-fit into the socket for a straight, permanent connection that can't loosen over time.
  • Product 2: 6-sided hexagonal tip is machined to precise tolerances for an exact fit with hex fasteners.
  • Product 2: Large, clear die-stamped size marking is easy to read and can’t wear off.
Check Stock

Greartisan DC 12V 60RPM 7Kg.cm 8mm Single Shaft Self-Locking Reversible Worm Gear Motor with Cable, High Torque Speed Reduction Motor, Turbine Electric Gearbox Motor

  • 【High Torque & Lower Noise】: Long carbon brush high life, high precision gear design, small size, high torque, low noise, high efficiency..
  • 【Positive-Negative Rotation】This type is miniature High Torque Electric Worm Gear DC Motor, which can change shaft rotation direction while the wiring positive andnegative be changed..
  • 【Self-Locking】: Turbo worm geared motor with self-lock, that is, in the case of motor without electric, the output axis is fixed, self-lock..
  • 【Versatile】: The reducer output shaft arranged vertically with the motor shaft, whole motor output is relatively short,can be widely used in various of occasions that require special installation size..
  • 【Application】: Boat, Car, Fan, Home Appliance, BBQ, Machinery and equipment, automation instruments, electric curtain, stage lighting, counter, faucet, safe, wet towel dispenser, vending machines, automatic monitoring and other modern art..
Check Stock

COMOWARE 20V Cordless Drill, Electric Power Drill Set with 1 Batteries & Charger, 3/8” Keyless Chuck, 2 Variable Speed, 266 In-lb Torque, 17+1 Position and 34pcs Drill/Driver Bits

  • 【20 Voltage & 2 Variable Speeds】 Higher voltage means more torque-spinning strength to overcome resistance. This 2 variable-speed ( 0-350 & 0-1300 RPM ) cordless drill with an adjustable clutch gives you the versatility for drilling different materials and using a variety of bits. The low speed is for driving screws, the high speed is for drilling holes..
  • 【25+1 Position Clutch & 266 In-lbs Max Torque】 This cordless drill's clutch provides precise control for drilling, which helps to prevent sinking a screw too deep, stripping out the head of a screw or even breaking a screw shaft. 17-Torque allows for various applications and additional 1-torque for drilling..
  • 【1500mAh Batteries & 60min Fast Charger】20V 1500mAh Lithium-Ion battery packed with higher capacity indicator lets you finish your job smoothly with long lasting performance. 1.5A 1-hour fast charger keeps your drill constantly running..
  • 【3/8” Keyless Metal Chuck & LED Work Light】A 3/8-inch cordless drill accepts a wide range of bits, making it versatile for common tasks around the house. Drill has keyless chuck that you can tighten or loosen by hand. The Forward/Reverse switch allows you to either screw or replace/remove bits for your purposes. LED Light for increased visibility....
Check Stock

Dremel 9100-21 Fortiflex 2.5 Amp Flex Shaft Powerful Rotary Tool Kit- Hands-Free Speed Control for Precision Crafts & Projects, Detail Sander, Polisher, Engraver, Etcher

  • HIGH PERFORMANCE MOTOR : High-torque, smooth-running, powerful 2.5 amp (1/5 HP) motor provides high torque at low speeds. Perfect for large jobs..
  • HANDS-FREE VARIABLE SPEED CONTROL : Provides maximum power with variable speed range of 0 – 23,000 RPM, controlled through the foot pedal allowing for hands-free control. Ideal for carving, cutting, engraving, smoothing, polishing and sanding applications..
  • HEAVY DUTY FLEXIBLE SHAFT: Features a bearing system for maximum durability and cool operation..
  • VERSATILE ROTARY TOOL KIT : Includes Fortiflex Motor Unit, variable speed foot pedal, heavy duty flex shaft, hand-piece with integrated chuck, wall hook, and 21 genuine Dremel accessories ideal for cutting, carving/engraving, cleaning/polishing, sanding, and sharpening/grinding applications..
  • 2 YEAR WARRANTY & US-BASED CUSTOMER SERVICE : Available by chat, email, phone or visit us at our service center in Racine, WI.
Check Stock

Sprinkler Head Trimmer, 6 in

  • Low friction: the ball does not circulate, and it can achieve rolling motion with minimal friction..
  • It can perform high-precision linear motion: as a component of the shaft and the nut, the gap in the rotation direction can be adjusted to ensure accuracy..
  • Rotating torque can be transmitted: the ball rolls on the ball groove of the spline shaft, and it can move linearly while transmitting the rotating torque..
  • Compact design: Even with a single-axis mechanism, it can move linearly while keeping the nut in the direction of rotation without deviation..
  • Large load capacity and long service life: Because the rolling surface is made of R-shaped ball groove in line with the diameter of the ball, the contact area is large, the load capacity is strong, and the service life is long..
Check Stock

TEKTON 1/2 Inch Drive Click Torque Wrench 25-250 ft.-lb | 24340

  • Includes 1-pc. 1/2 in. drive torque wrench.
  • Product manual with torque conversion chart.
  • Wrench emits a click that can be heard and felt when the preset value is reached.
  • Permanently marked, high-contrast dual-range scale is easy to read, even in low light.
  • Reversible ratchet head drives in both directions and measures torque in clockwise direction.
  • Durable all-steel construction has no plastic parts to break or wear out.
Check Stock

uxcell 10mm to 10mm Bore Rigid Coupling Set Screw L22XD16 45# Steel,Shaft Coupler Connector,Motor Accessories

  • Connection Diameter: 10mm to 10mm, Total Length: 22mm /0.87 inch, Outside Diameter : 16mm/ 0.63 inch.
  • Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies..
  • Top tight type rigid coupling with 2/4 screws to hold the shaft tightly.
  • high torque with rigidity, low inertia and excellent sensitivity..
  • NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use..
  • Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling..
Check Stock

uxcell 8mm to 8mm Bore Rigid Coupling Set Screw L22XD14 45# steel,Shaft Coupler Connector,Motor Accessories

  • Connection Diameter: 8mm to 8mm, Total Length: 22mm /0.87 inch, Outside Diameter : 14mm/ 0.55 inch.
  • Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies..
  • Top tight type rigid coupling with 2/4 screws to hold the shaft tightly.
  • high torque with rigidity, low inertia and excellent sensitivity..
  • NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use..
  • Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling..
Check Stock