Top 24mm Nozzle

Pressure Washer Extension Wand, Aihand 24FT Telescoping Power Washer Wand with Gutter & Brush Cleaner Attachment, 7 Spray Nozzle Tips, 2 Hose Inlet Adapters & Belt Harness, 4000 PSI

  • ...le belt support harness. This helps you have better control of the pressure washer gutter cleaner and reduces the strain on your neck, arms and back. No need to climb ladders, it makes your cleaning job safer and more efficient, allowing you to clean in comfort.
  • 【7 Spray Nozzle Tips】Aihand offers 7 different spray angles to make it easy to reach hard-to-reach areas. Nozzle kit includes 4 high pressure stainless steel quick connect nozzles (0°red nozzle, 15° yellow nozzle, 25°green nozzle, 40°white nozzle), one low pressure nozzle (65°black soap nozzle) and 2 jet stream tips (Blue tip for rinse mode, Pink tip for soap mode). They meet your cleaning needs in a variety of situations such as roofs, cars, fences, walls, windows, etc.
Check Stock

Baomain ZU05S 6mm Vacuum Ejector Push in One Touch Tube Type Pneumatic Fitting

  • Type: Push in Tube Type(Without Exhaust).
Check Stock

High Pressure 3/16\ Threaded Outdoor Anti-drip Fogging Spray Head Misting System Nozzle, Orifice 0.3mm 10-Pack

  • High Quality Material: The misting nozzles are made of brass with stainless steel orifice, anti-rust, durable, leak-proof, the mister nozzle is best choice for outdoor use with cold water.
  • Wide Usage: Widely apply for garden, patio, lawn misting system, outdoor cooling, greenhouse, humidification, spraying disinfectant, epidemic prevention, deodorant air purification, small fountain, outdoor cooling system, agriculture irrigation system, etc..
  • Dimension: Thread size is UNC 10-24, Orifice diameter is 0.4mm.
  • Easy to Install: The brass misting nozzles are easy to install, which can be easily screw into any 10/24 UNC threaded mist nozzle opening.
  • Leak-proof, self-sealing o-ring included with each brass nozzle.
Check Stock

Makita PR00000034 1-3/8\ Welding Nozzle

  • WELDING NOZZLE SUPPORT: PVC floor round welding nozzle with wheels, can be used with welding wire, with rollers to guide the welding seam straighter..
  • WELDING NOZZLE WITH WHEEL: The welding nozzle with wheel can be directly fixed on the hot air gun. When there is a wheel, the wheel can be directly attached to the gap, and the gap can be filled evenly along the line of the gap, which can solve the manual filling of the weld. The filling is not straight..
  • WELDING ROD SPECIFICATIONS: Hot Air Gun Welding Nozzle can use 3mm/4mm/5mm..
  • WELDING NOZZLE WITH WHEEL ADAPTER: 8mm inner diameter of the heat gun nozzle, which can be matched with any other welding nozzle with an outer diameter of 8mm..
  • MATERIAL: 304 stainless steel alloy, with good corrosion resistance and heat resistance, can withstand high temperatures of 800-1000℃, will not rust, oxidize, and deform under high temperature for a long time. It is an ideal accessory for plastic welding..
Check Stock

50PCS Brass Misting Nozzles for Outdoor Cooling System 0.012' Orifice (0.3 mm) 10/24 UNC

  • Operation Pressure:4-70kg/cm (60-995 psi) flow rate:80-145l/min (21-38gpm)..
  • Save Water: Minimal water use of 1/2 gallon of water per hour per nozzle, which fits for low pressure mister system..
  • Package Quantity: 50Pack. The orifice of these mister nozzles is 0.012 inch/0.3 mm. Screw into any 10/24-threaded mist nozzle opening..
  • High Quality & Leak Proof: These misting nozzles made of brass, never rust. Best choice for outdoor use with cold water. Each nozzle is equipped with a leak proof O-ring, so no tape or sealant is required..
  • Wide Application: The brass misting nozzle is widely applied to outdoor cooling system, agriculture irrigation system, green house, landscaping, small fountain, etc..
Check Stock

Funrous 3D Printer Nozzle Cleaning Kit, Stainless Steel and Brass Compatible with Mk8 Extruder Nozzles 0.2mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm Cleaning Tool for Cr-10, Ender 3/ V2 Ender3 Pro (37 Pcs)

  • Nozzle Cleaning Kit: you will get 32 ​​MK8 nozzles (including 4 hardened steel nozzles, 11 stainless steel nozzles and 17 brass nozzles), 5 nozzle cleaning needles (0.15mm), 5 cleaning brushes (0.15mm), 1 nozzle wrench, 1 L shaped socket wrench and 2 tweezers, sufficient quantity for you to conveniently replace it in time and achieve quality printing.
  • And the input diameters of nozzles are 0.2 mm, 0.4 mm, 0.5 mm, 0.6 mm, 0.8 mm and 1.0 mm.
  • Wide Compatibility of 3D Printer Extruder Cleaning Kit: MK8 extruder nozzle is suitable for 3D printer Makerbot, CR-10, MK8 and RepRap, Ender 3, Ender 2, Prusa I3, Prusa 3 and other 1.75 mm PLA ABS 3D printers.
  • Reliable Material: the mk8 nozzle set is made of quality hardened steel, brass and stainless steel, strong and reliable, with higher hardness and rust resistance, wear resistance, heat resistance, easy to install and replace, serving you for a long life.
  • Useful Nozzle Wrench 3D Printer Kit: the 0.15mm nozzle cleaning needle is made of stainless steel, flexible and sturdy, easy to bend into the nozzle without breaking, and greatly dealing with the blockage of the nozzle at the h....
Check Stock

20 Pack Brass Misting Nozzles Replacement Heads, Low Pressure Atomizing Misting Sprayer for Patio Lawn, Landscaping, Dust Control, Outdoor Cooling Mister System, 0.016\(0.4mm) Orifice, 10/24 UNC

  • The Misting Nozzle is made of brass materials and self-sealing o-ring included which is anti-rust, durable and leak-proof. It is good choice for outdoor use with cold water..
  • The orifice of the Brass Mist Nozzle is 0.4mm（0.016"), so it will produce tiny and soft mist to make excellent cooling misting in hot summer..
  • The thread of the Mister Nozzles is standard 10/24 UNC. It can match many kinds of tee connectors widely. Such as the 1/4" tee connector, standing misting nozzle connector and so on..
  • The Brass Misting Nozzles are easy to install, which can be easily screw into any 10/24 UNC threaded mist nozzle opening.
  • The nozzles are widely used to make outdoor cooling system, fan misting, agriculture irrigation system, humidification, deck/porch cooling misting, standing misting system, trampoline misting, etc..
Check Stock

RuoFeng Mister Nozzles Brass For Outdoor Cooling System Low-Pressure Atomizer 22 pcs Orifice 0.008\ (0.2 mm) 10-24 UNC

  • 22 Pcs Brass Misting Nozzles For Outdoor Cooling System, Greenhouse, Landscaping and Dust Control.This type of nozzle is applied in the low pressure.
  • This misting nozzle does not need to use air compressed, can use liquid pressure to form a very fine mist, excellent misting effect, energy and water saving, low cost, good effect, no leakage.
  • It is used a sturdy brass body with stainless steel orifice,Use of precision nozzle keypunch, sophisticated production,strong durability.
  • Operation Pressure:20-70kg/Cm .Flow Rate:80-145l/Min (21-38GPM).Minimal Water Use Of 1/2 GPH Per Nozzle.
  • Thread size:10-24 UNC，Orifice：0.008" (0.2 mm).
Check Stock

Wangdd22 15pc/Set 1.75mm Teflon Throat Tube+0.4mm Extruder Nozzle Print Heads+Heater Blocks Hotend for MK8 Makerbot Anet A8 3D Printer

  • Pack of 5 x 3D Printer Extruder Hotend 30mm Length 1.75mm Nozzle Inputting Tube( for MK8 Makerbot Reprap Prusa I3 3D Printer) and 5 x 3D Printer 0.4mm....
  • 0.4mm Extruder Brass Nozzle Print Head: Color - Golden.
  • Compatibility: compatible with all 1.75mm PLA ABS 3D Printer.
  • Quanlity:15pcs/lot (5 piece 1.75mm Nozzle Inputting Tube,5 piece 3D Printer 0.4mm Extruder Brass Nozzle Print Head,5 piece Heater Blocks Hotend).
Check Stock

Melonsun 300pcs Foam Cleaning Swab Sticks for Inkjet Printer, Camera, Optical Lens, Guns

  • ... enables the swabs to resist from corrosion during cleaning and make fast absorption of contaminants onto the swab head. Long and sturdy handle provides good control of balance and excellent flexibility, not easy to break..
  • ✅USE for PRINTERS & OPTICAL EQUIPMENT- Great for cleaning and maintenance of inkjet printer nozzle, photo machine nozzle, inkjet printer grating, microscopes, photo machine grating, camera, optical sensors. No static electricity, low volatility, no damage to the nozzle and grating..
  • ✅MULTIPLE USES- More widely use for cleaning printers, electronics, gun, auto and aviation applications, banking machines, gaming machines, A/C vents and vents around your kitchen range..
  • ✅SATISFACTION GUARANTEE- We provide a 100% satisfaction guarantee. If for any reason you are unhappy with our product, just send us a message. Our customer service is available 24/7, and we will quickly respond to any questions or concerns..
Check Stock

16 Pieces 3D Printer Nozzle Wrench Cleaning Kit,10 Nozzle Cleaning Pins with Storage Box 2 Tweezers 2 Cleaning Copper Wire Brushes 2 L-Shaped Wrench Tool for 3D Printer Accessories

  • 3D printer nozzle cleaning kit: you will get 10 pieces stainless steel nozzle cleaning pins in 5 sizes, 2 pieces cleaning copper wire brushes in....
  • Nozzle cleaning pins: there are 5 different sizes, including 0.15 mm, 0.25 mm, 0.35 mm, 0.4 mm and 0.5 mm, allowing you to choose according to your....
  • Cleaning copper wire brush: the brush is suitable for 3D printer nozzle hot bed cleaning and rust removal.
  • When you use 3D printer nozzle brush to....
  • Wrench and tweezer: 6 mm 7 mm L-shaped hexagonal wrench tool can be applied for fastening nozzles, and 6 mm wrench is compatible with mk8 nozzle.
  • Quality material: cleaning pins are made of stainless steel, and wire brushes are made of copper wire, sturdy and flexible, not easy to break and....
Check Stock

Gaahleri Airbrush Kit, Airbrush Gun Dual-Action Gravity 1/2 & 1/4 oz Fluid Cup, 0.35 & 0.5 mm Needle, Cost-Effective Air Brush Set Makeup Nail Art Painting Model Coloring Cake Decor

  • .... It is more convenient to disassemble and clean, while still maintaining impressive performance. It is a value-for-money product that exceeds your expectations..
  • [ Quick Self-Centering Structure & 8 MAC System ] The Airbrush Gun features a quick self-centering drop-in nozzle structure, making it much easier to clean and less clogging. The 8 Micro-Air-Channel ( MAC ) System in Nozzle ensures intricate detail work and reliable performance for daily use..
  • [ Smooth Inner Cup & Replaceable Needle Nozzle Sets ] This Airbrush Gun features a replaceable fluid cup with a capacity of 1/2 oz and 1/4 oz. The smooth inner surface of the cup minimizes paint buildup and simplifies the cleaning process for maximum efficiency. Additionally, the set includes both 0.35mm and 0.5mm needle nozzle options to accommodate a wide range of uses and meet all your airbrushing needs..
  • [ 100% User Experience & 50% the Cost ] As a versatile product that combines the benefits of a quick self-centering structure, outstanding performance, expandable dual-diameter nozzle and needle set, and 2 replaceable gravity fluid cups, this airbrush can und....
Check Stock