Top 3 0 Tft Touch Screen
DIYmalls ILI9341 3.2 inch TFT LCD Display Screen Module 3.3V Resistive Touch Panel 320x240 w/SD Card Slot for Mega 2560 only
- ILI9341 tft display has 40 pins, so it is not compatible with uno r3 and nano..
- ILI9341 display works at 3.3V. If you use it with mega 2560, please insert TFT 3.2 shield, not directly connect board with tft lcd module..
- You may need to set a suitable parameter in sketches to use this 3.2" touch screen, but it is not a difficult task..
- If you have any problem, please contact seller as follow: click "DIYmalls"(you can find "Sold by DIYmalls" under Buy Now button), in the new page, click "Ask a question"..
- ili9341 3.2 inch tft lcd can not work with esp32 board due to no SPI interface..
Check StockCiyoo N1 IP67Waterproof Fitness Smartwatch for Women ,Fitness Tracker Watch with Heart Rate Monitor Step Sleep Tracker Jewelry Watch White
- Fashion Design -Fashion women appearance design, low-key and simple watch strap and flip the wrist screen switch, show a unique charm design.Finally,....
- The intelligent LED display design allows you to quickly and easily adjust the pattern with your fingertips. The bracelet will vibrate to remind you....
- Large screen full touch, TFT true color screen.
- High Sensitivity Touch Screen - The 0.66 inch white light level screen allows information to be clear on the screen.With the round screen operation,....
- Convenient Health Count —This journey smart watches, by scanning or code, “Droihealth " in the app store market search in real-time records your....
Check StockBIGTREETECH Upgrade PITFT50 V2.0 Graphic Smart Display DSI Interface 5 inch LCD Touch Screen Suitable for Raspberry Pi
- 1) This is a 5-inch LCD touch screen with a resolution of 800 x 480 for Raspberry-Pi. The display area can reach 108 x 64.8mm..
- 2) Adapt to the Raspberry-Pi DSI display interface, directly driven by DSI.
- with a capacitive touch panel. Supports 5-point touch..
- 3) The unique hole design on the back allows you to install the Raspberry-Pi directly. PI TFT50 display adopts Raspberry-Pi power supply design, no external power supply is needed..
- 4) The PI TFT50 display supports hardware backlight adjustment, and the backlight brightness can be adjusted by rotating the potentiometer behind the screen..
- 5) If you encounter any problems after receiving the product, please contact us via Amazon. We have professional technical after-sales personnel to solve your problems. Thanks for your cooperation..
Check StockNaroote Display Module, TFT LCD Touch Panel Serial Port Module + ILI9341 5V/3.3V 2.8\ 240x320 -Product Quality Assurance
- Easy to Program - Includes complimentary GUI Software that makes programming fast and easy for engineers. This can reduce your project's time and expense. The LCD touch screen can easily create an intuitive touch interface by adding png/jpg/bmp/svg/gif image files as your background and defining functions by components. It's easy even for beginners..
- Lots of Powerful Upgrades - New Launch Civil Series 4.3" TFT LCD module can be controlled by any MCU. This offers 1 G Hz Cortex A8 CPU driving device and 128 Flash memory for HMI projects. You also get RS232/TTL UART Interface and USB port. This is an excellent choice for your Arduino and Raspberry Pi projects..
- Clear, Detailed, Hi Res HD - Our Smart HMI TFT LCD display offers excellent 480x272 high resolution with 4-wire resistance touch screen. Rich 262K (18bit) color for high color restore. Rectangular ratio 16:9 display format conversion. 70°/70°/50°/70° wide viewing angle, adjustable brightness(300 cd/m²) , TTF Font and contrast (500:1) offers you the ultimate project experience to accomplish more with improved results..
- Ultimate TFT LCD Display Module for Industry - SCBRHMI Intelligent TFT-LCD Module Model STWC043WT-01 is a customer favorite for a wide range of industrial and business appl....
Check StockReplacement Nintendo DS Stylus In Black pack of 2 by Mars Devices
- Compatible With: For Nintendo DS Lite Or Resistive TFT Touch Screen. For Arudino TFT Screen..
- Keep your screen free from scratches and fingerprints..
- Easily snaps inside a convenient storage slot on the back..
Check StockSmeg CMSU4104S Linea Aesthetic Fully Automatic Built-In Coffee System, 24-Inches
- DESIGN: “Mystic-gray” glass finish, Full-color TFT touch screen display, 4 LED lights.
- FEATURES: Adjustable coffee size (5 levels) and temperature (3 levels), Frothing nozzle for cappuccino Multi-language display,.
- DIMENSIONS(HxWxD): 17 13/16 x 23 1/2 x 18 1/4-Inches.
- ELECTRICAL SPECIFICATIONS: Tension/frequency: 120 V.
- ADDITIONAL INFORMATION: Water tank capacity: 81 oz, Coffee bean container capacity: 0.77 lbs.
Check StockAMOLED 2023 New HK8 Pro Max Ultra Smart Watch Men Series 8 49mm 2.12 Inch High Refresh Rtae AMOLED Screen NFC IWO Smartwatch Women Black
- APP RDFit Compatible System (Compatible System) Android4.4 (inclusive) and above, IOS9.0 (inclusive) and above FLASH memory (FLASH memory) RAM: 192KB, ROM: 256KB Flash: 128M.
- Type (Type) TFT Screen size (screen size) 2.16 inches Pixel (Resolution) 420*486 IPS Touch type (Type) full screen touch BT BT5.0.
- NFC support Gravity sensor (G-Sensor) support.
- Battery type (Type) lithium polymer Capacity 350mAh Charging Method Wireless Charging.
- Waterproof level (Waterproof Level) IP68 Charging time (Charging time) about 3H Life time (Life time) about 5-7 days in use, 30 days in standby.
Check StockGeekworm for Raspberry Pi 4 Model B, 3.5 inch Touch Screen with ABS Case and Pi 4 Heatsinks Kit, Max 50FPS 480x320 Pixel Monitor TFT Touch LCD (Support Raspbian, Ubuntu, Kali, Retropie System)
- For the document and download information, refer to Geekworm WiKi search (3.5_LCD_B)..
- Note: 1. The Raspberry Pi 4B mother board and cooling fan is not included in all the packing list. 2. The black ABS case only suitable for this 3.5 inch screen with Raspberry Pi 4 Model B, do not support other Raspberry Pi versions. Not support install cooling fan..
- Physical resolution 320 x 480, with resistive touch control.
- it supports up to 125MHz SPI signal input, showing stable and no flicker.
- Support Raspbian/Ubuntu/Kali/Retropie system, provide driver and image, please refer to WiKi(user manual)..
- LCD Interface: SPI (up to 125MHz SPI input, Max FPS: 50Mhz).
Check StockHopoocolor OHSP350P Spectrometer 350-800nm PPFD Meter PAR Quantum Meter for LED Grow Lights Full Spectrum
- 1.Wavelength Range : 400-700nm; Wavelength Interval : 10nm ; Semiband Width: 10nm ;Measured Reflectance Range: 0-200;%.
- 2.Illuminant:D65, A, C, D50, D55, D75, F2, F7, F11.
- 3.Data Port: USB, Bluetooth 4.0 ; Data Storage Standard: 2000 Pcs, Sample: 20000 Pcs.
- 4.High electronic hardware configuration: 3.5-inch TFT color LCD,Capacitive Touch Screen, concave grating, 256 Iimage Element Double Arrays CMOS Image Sensor.
- 5. Perfect combination of beautiful appearance and the human body mechanics structural design.
Check StockGeeekPi Raspberry Pi 4 TFT 3.5 inch Touch Screen with Case, Raspberry Pi Fan and Heatsinks, 320x480 Resolution LCD Display for Raspberry Pi 4 Model B (Raspberry Pi Board NOT Included)
- This kit contains an ABS case and a 3.5 inch resistive touch screen. It’s fully compatible with Raspberry Pi 4 Model B. NOTE: Raspberry Pi Board NOT Included! The fan and screen can not be installed at the same time..
- The 3.5 inch resistive touch screen can be directly inserted into any version of the Raspberry Pi boards, but the ABS case is only compatible with Raspberry Pi 4B.
- The resolution of 3.5 inch touch screen can be adjusted by software.
- The screen support 125MHz SPI signal input, the refresh rate is about 50fps which is enough to play the videos or games and display stable without flicker.
- It supports Raspbian, Ubuntu, and Kali system, the drivers and image are provided freely..
- Package includes: 1x ABS Case for Raspberry Pi 4B, 1x 3.5 inch TFT resistive touch screen, 1x Aluminum heatsinks, 1x Touch Pen, 1x 30x30x7mm cooling fan (NOTE: this fan can not be installed with 3.5 inch screen at the same time).
Check Stock5 inch Touchscreen Monitor for Raspberry Pi DSI LCD Screen 800×480 Display for Raspberry Pi 4B 3B+ 3A+ 3B 2B B+ A+ CM3/3+ Compatible with Raspbian Ubuntu Kali WIN10 IoT RetroPie
- 5 inch capacitive touch display for Raspberry Pi, 800×480 resolution,TFT wide angle, toughened glass touch panel.
- 5 inch TFT screen capacitive touch control, support up to 5-points touch.
- Supports Pi 4B/3B+/3A+/3B/2B/B+/A+, another adapter board is required for CM3/3+, supports Raspbian/Ubuntu/Kali and WIN 10 IoT, driver-free.
- Mipi DSI interface, refresh rate up to 60Hz.
Check StockSOEKS ECOVISOR F2 Nitrate Tester for Food Meat Fish and TDS Water Tester for Personal Safety & Food Industries
- Nitrate reading range: 20 to 5,000mg/kg | Temperature compensation: 0 °C to 30 °C.
- Measurement deviation: ±12 %, max | Water quality Measuring....
- Temperature compensation: 0 °C to 30 °C | Measurement deviation, from the final value: ±12 %.
- Display: Color touch screen TFT 320 x 240 pixels |.
- Power supply: 2-AAA batteries | Voltage supply range 2 - 3.5 V Battery charging current: 300 mA | Power required from the power supply or USB: Max.....
- Reading type: Nitrate, Water content | Product type: Multi tester | Dim: 21 x 54 x 147 mm.
- Supply Scope: SOEKS Ecovisor F2,Rechargeables,Battery charger PC Cables, User manual | Applications: To check nitrate content in vegetables, meat,....
Check Stock