Top 304 Seamless Pipe

MroMax Expansion Lifting Eyebolt M10x60mm Eye Ring Bolt 3.54\ Length 304 Stainless Steel Expansion Bolts with Nuts Eye Hooks Anchor Fastener for Concrete Wall Masonry Ceiling Silver 2Pcs

  • 10 standard M6x80mm, please refer to the picture for detailed dimensions..
  • 304 stainless steel, corrosion-resistant, can also be used in humid places, strong and durable..
  • The expansion screw is a solid structure, and the punch is formed at one time, with a large bearing capacity and extremely strong tensile strength.
  • the expansion pipe is cut by seamless steel pipe, which has a large tensile force after expansion, which is strong and safe..
  • Application: This heavy-duty torque control shield anchor Hardware Tools for Wall Building is suitable for concrete masonry and solid brickwork,ceiling,expansion sleeve anchor bolt heavy duty fixing anchors suitable for fences, anti-theft, doors and windows, rain sheds, air -conditioning fixed, home decoration, engineering, etc..
  • Note: Expansion bolts must be installed on a relatively hard base plate, and the soft and easy to fall off places are unstable, such as the gap of the lime soil of the wall. All expansion pipes should enter the wall.. As long as the threaded part is long enough, the sleeve part will be deeper and stronger..
Check Stock

Mojiate Made Outboard Steering System 14' Boat Steering Cable 14 Feet Marine Steering System 3/4'' Shaft with Stainless Steel 13.5 Inch Wheel for Yachts and Waterborne Vehicles

  • 【Rotary Steering System】The boat steering systems have excellent performance and can make the ship steering more precise..
  • 【Durable Material】Made of cast steel and 304 stainless steel seamless pipe and corrosion-resistant materials，durable and steady..
  • 【Flexible Screw】 It can be adjusted according to customer's own needs. It can suits many types of people..
  • 【Complete Accessories】Rotary Helm, 14' Steering Cable, Hardware, 90 Degree Bezel Kit, Standard 3/4'' tapered steering shaft..
  • 【Steering Wheel】Steering wheel with hub , center cap with Knob,13.5" Size..
Check Stock

Bessey VAC-6 Angle Plates (6-Pack)

  • 【SIZE】- Fit Pipe Diameter: 14mm/ 0.55".
  • 【MATERIAL】- Made of 304 high-grade stainless steel. After punching, bending, and integral molding, the structure increases the rib structure to improve the strength of the pipe clamp. Fastened and durable.
  • 【APPLICATION】- Widely used in plumbing, petrochemical, power supply, and other pipeline laying, fixing all kinds of pipelines on wood, masonry, or similar surfaces.
  • 【USAGE】- Choose the corresponding inner height of the pipe clamp according to the OD of the pipe, determine the hole according to the hole dia and position of the pipe clamp, and lock the fastening screw. A layer of soft gasket can be placed on the inner side of the pipe clamp and the pipe fittings, the effect will be better.
  • 【PACKAGE CONTENT】- 20Pcs × Rigid Pipe Straps.
  • Note: Mounting screws are not included here.
Check Stock

AMZCNC Compact Bender Kit with Reverse Bending Attachment for 1/4 - 7/8 Tube and Pipe Bending Premium Ratcheting Tube Bender

  • 【High quality material】: The main body of the tube bender of The copper tube bending tool kit is made of stainless steel, which is pressure....
  • 【Wide range of application】: This pipe bender tool kit is suitable for pipe benders of 1/4"-7/8", applicable pipe materials: copper pipe, aluminum....
  • 【Easy to install】: The pipe bender is easy to install, easy to assemble and operate, and easy to get started. Support pipe diameter: 1/4.
  • 【Ergonomic design】: CT-999 pipe bender conforms to ergonomic design. The kit is made of 304 stainless steel, steel fiber, iron and other....
  • 【Complete accessories】: The pipe bender kit has a variety of tools to meet different needs. The kit includes 1 x Bender, 7 x Fiber Wheel, 1 x Pipe....
Check Stock

Champion Cutting Tool Corp Circular Saw Blade 8\

  • New & innovative, RZR Cermet tipped circular saw blades cut faster and 2X longer than standard carbide tipped blades. Cermet = a ceramic and metal compound that resists heat and friction.
  • Feature 2X more teeth than standard cutting blades to cut through tough 304 stainless steel.
  • Feature 2x more teeth than standard cutting blades to cut through tough 304 stainless steel.
  • Special 2-step saw body design and unique laser slits reduce vibration, noise and increase stability. Ideal for cutting stainless steel plate, angle iron, pipe, all thread/rebar and more..
  • Max thickness of cut= 1/8".Please note that when cutting pipe or tubing, "max thickness of cut" refers to wall thickness, not overall diam..
Check Stock

MroMax Expansion Lifting Eyebolt M12x80mm Eye Ring Bolt 4.72\ Length 304 Stainless Steel Expansion Bolts with Nuts Eye Hooks Anchor Fastener for Concrete Wall Masonry Ceiling Silver 2Pcs

  • 10 standard M8x80mm, please refer to the picture for detailed dimensions.003cbr003e.
  • 304 stainless steel, corrosion-resistant, can also be used in humid places, strong and durable.003cbr003e.
  • The expansion screw is a solid structure, and the punch is formed at one time, with a large bearing capacity and extremely strong tensile strength.
  • the expansion pipe is cut by seamless steel pipe, which has a large tensile force after expansion, which is strong and safe. 003cbr003e.
  • Application: This heavy-duty torque control shield anchor Hardware Tools for Wall Building is suitable for concrete masonry and solid brickwork,ceiling,expansion sleeve anchor bolt heavy duty fixing anchors suitable for fences, anti-theft, doors and windows, rain sheds, air-conditioning fixed, home decoration, engineering, etc.003cbr003e.
  • Note: Expansion bolts must be installed on a relatively hard base plate, and the soft and easy to fall off places are unstable, such as the gap of the lime soil of the wall. All expansion pipes should enter the wall. . As long as the threaded part is long enough, the sleeve part will be deeper and stronger.003cbr003e.
Check Stock

PATIKIL Thermowell Pipe Immersion Well 1/4 ID 9/32 OD 20 Stainless Steel 304 for Weldless Thermowell Brewing Thermometer 2pcs

  • Thermowell pipe is mainly used for sensor protection pipe. Temperature sensors are placed in thermowell pipes, which can be used to measure temperatures, such as water tank temperature measurement and temperature measurement during the brewing.
  • Thermowell pipe, is in size of : 6mm/0.24-inch inner dia, 7mm/0.28-inch outer dia, 500mm/20-inch length.
  • 304 stainless steel material, sturdy and durable, not easy to rust.
  • Easy to use, easy to install and operate.
  • Steps of installation: 1. Choose the right size thermowell pipe.
  • 2. Remove the thermowell pipe to be replaced.
  • Please pay attention to choose the appropriate size of thermowell pipe, especially the diameter and length of the thermowell pipe.
Check Stock

Dernord 2 Inch (OD64) Tri-clamp Ripple Heating Element Electric Water Heater 5500W 240V

  • Stainless Steel Tri-clover Clamp 2 Inch (OD64), fit 2″(51mm) pipe if that pipe has a 2″ flange for triclamp.
  • With SUS304 Materials Cap,easy to Install and fits Standard 2″ tri-clover coupler of American.
  • Nylon Cable Gland Joint Adjustable Locknut for PG21 Wire OD 12.5mm to 18mm.
  • SUS304 Tri-clamp Ripple Foldback heating element provides 5500w 240v of power.
  • Resists dry firing, lime deposits, and sand that would burn out ordinary elements.
Check Stock

Rodeel 24 PCS Fishing Leaders Wire with 49 Strands Tooth Proof Stainless Steel with swivels

  • Package Content:24pcs fishing wire leaders rigs.
  • Length: 25cm/0.82inch,Line Diameter: 1mm/0.04inch,Steel wire Pulling Force:40KG/88.18LB.
  • Material:High-strength stainless steel wire +hot air pipe.
  • Design - 8-ring interface ring solves the winding problem, and use hot air pipe to wrap the snap and swivel, remain stable underwater, fish loading rate is higher.
  • Lamination fishing line- 304 stainless steel 49 stranded wire，very soft and strong. The 49 strand design makes it very durable, and the 304 lamination stainless steel wire used will not rust..
Check Stock

Round 4-1/4Inch Shower Drain, 304 Stainless Steel Brushed Gold Shower Floor Drain, Quadrato Pattern Grate Removable,Includes Drain Flange Kit

  • [Size] 4-1/4Inch 2.36" central outlet. 20-25 L/min high flow capability, solving ponding problem for bathroom, pool effectively. Thicken steel cover offer a good sealing ability,Strong and sturdy. Base flange connects to drain pipe, fit standard U.S. plumbing connection..
  • [Material] This round drain shower made standard 304 stainless steel, base flange made of PVC construction. Drain surface plating brushed finished, protect against corrosion, scratches and rust for long-lasting durability..
  • [Installation] Round shower drain outlet easy to unload, fits US NO HUB Drain Base System. Can be used in bathroom, kitchen,hotel,pool, balconies, outdoor,garage, basement and toilet etc..
  • [Design] The round drain cover with grid design to enhance water flowing. Prevent large items from falling,Removable hair strainer.Embedded design offer a invisible and seamless look on your floor. Thicken steel cover offer a good sealing ability..
Check Stock

Twotrees J-Head V6 Hot End Full Kit 1.75mm 12V RepRap 3D Printer Extruder Parts Accessories 0.4mm Nozzle

  • 【1】Applicability & compatibility: compatible with all 1.75mm V6 Makerbot 3D printer.
  • NTC connector with terminal, easy to intall..
  • 【2】Anti-leakage & anti-blocking design: extruder nozzle connect connect with the tube seamless, prevent print material from leaking or blocking ..
  • 【3】Heat resistant & ventilation: 12V/40W NTC heater, avoid NTC burn and break frequently, 304 stainless steel material nozzle throat and high quality resistor whose temperature can up to 280°C, 12V high speed fan, radiating quickly ..
  • 【4】Specification: brass material extruder nozzles, output diameter 0.3mm/ 0.4mm/ 0.5mm, input diameter (filament) 1.75mm ..
  • 【5】Package include: all metal V6 hotend 12v / 40w / 1.75mm / 0.4mm extruder full kit (V6 printhead + fan + fan cover + PTFE tube + pipe fitting), 1 pieces brass extrusion nozzles (1×0.4mm ) and a v6 heating block, a 2-part Teflon tube in the nozzle neck made of stainless steel..
Check Stock

DNYSYSJ Kitchen Commercial Sink with 2 Bowls,2 Compartment Utility Sink with 2 Drainer & 2 Shelves,304 Stainless Steel Freestanding Kitchen Sink

  • 【Main Parameters】Color: silver,Material: 304# stainless steel Surface treatment: wire drawing technology,Number of bowls: 2 Bowl shape: rectangular,Maximum load: 150kg,Bowl size: 33x33x20cm,Platform size: 35x45cm,Overall size: 120x85x45cm Inlet pipe: 80cm (31.5in),Packing size: 125*50*35cm,Weight: 17kg.
  • 【Premium Quality】Our double utility sink is made of sturdy 304 stainless steel, super easy to clean and keep hygienic, with a polished surface, with better anti-corrosion effect and long-lasting effect, and it will definitely look shiny like a kitchen! The spacious drainer provides you with enough space to dry everything from cutlery, plates to pots and pans..
  • 【Easy to Use and Clean】It adopts streamlined rounded corners and edge design, no dead corners, convenient for daily washing, double bowls can be placed independently and easy to clean. Can be cleaned with neutral soap to ensure anti-rust gloss life.
  • 【Double Shelves Design】Double shelves can store cleaning equipment and accessories, two stainless steel drainage devices with two detachable filters can prevent food and debris from clogging the drainage pipe, and the reinforced table can be used for cutting pork chops and steaks, etc., gooseneck 360 degree rotation Faucet, can prod....
Check Stock