Top 3m Dashboard Mounting Disks

3M Sticky Adhesive Replacement for Magnetic Dashboard Pop Out-Stand Mount Base Circle Double Sided Tape 2 Pack Rectangle VHB Sticker Pads for Dash Magnet Phone Mounts Sockets (Red)

  • ...vely designed for grip holder back and various magnetic cell phone car phone mount base. This adhesive replacement kit is a good choice to remount your phone wall mount and magnetic phone mount. With your adhesive cell phone holder, you can position the phone anywhere there's a flat and hard surface in the car dashboard.
  • ✅Easy to use: You need to remove the used 3m tape of phone car mount and clean up the mounting surface included until fully dry before installation, then place a new 3m adhesive sticky circles on the back of grip mount and press firmly for 5 to 10 minutes for better connecting to the car mount base. please wait 12 HOURS to use after stuck.
  • ✅What You Get: 10 pcs 1.38" 3M stickers,4 pcs 0.91" 3M stickers,2 pcs 1.08"*1.88" 3M stickers,30 days money back grantee,If you're unsatisfied with this item for any reason, we'll immediately refund your purchase price.
Check Stock

LISEN Magnetic Phone Holder for Car Fit Curved Surfaces Car Phone Holder Mount Flexible & Stable Dashboard Magnetic Phone Car Mount with 3 Metal Plates Fit All iPhone 14/13/12/11,Pro,Pro Max,Android

  • ...ous phone mount for car on the market..
  • DOUBLE ADHESIVE PADS, LARGER STICKING AREA: This magnetic phone mount for car adopts the design of double 3M adhesive pads with a larger area, and the sticking area is at least 200% bigger than other ordinary single adhesive pad one. The larger sticking area can fit the curved dashboard to the maximum extent. Thereby improving the stability and durability of the adhesive magnetic car mount by 200%.That car phone holder mount comes with 2 additional high quality 3M adhesive pads for replacement..
  • GRAPHENE 3M ADHESIVE, EXTREMELY STABLE: The adhesive strength of this upgraded double-pad magnetic car phone mount is over 66 lbs. The graphene-based adhesive pad has gorgeous heat resistance and heat dissipation. Tested by LISEN laboratory, in an atmosphere of 122°F and -42°F, this car phone holder could not fall off with heavy things weighing 30kg for more than 72 hours. You can get dependable service from this car mount attachment in any inclement weather or poor driving conditions..
  • STRONG MAGNETIC FORCE CLOSED MAGNETIC FIELD: LISEN Magnetic Car Phone Holder Mount includes 6 sturdy NdFeB magnets, which can support up to 7.7 lbs./3.5 kg (15 x iPhone 13).6 strong NdFeB magnets, scientifically arranged to form a cl....
Check Stock

8 Pack 3M Sticky Adhesive Replacement Compatible with Socket Mount Base, VOLPORT VHB Sticker Pads for Car Magnetic Phone Holder and 2pcs Double Sided Tape for Collapsible Grip & Stand

  • ...esigned for grip holder back and various magnetic cell phone car phone mount base. This adhesive replacement kit is a good choice to remount your phone wall mount and magnetic phone mount. With your adhesive cell phone holder, you can position the phone anywhere there’s a flat and hard surface in the car dashboard.
  • Strong 3M Sticky Adhesives: 2 PACK more larger sticky adhesive replacement parts compatible with phone collapsible grip. With this car mount replacement parts, you do not worry about purchasing another grip mount. Just remount your expanding stand with this vhb 3m double sided adhesive pads. Best sticker replacement pads for your phone adhesive mount.
  • Alcohol Pads Provided: Clean the chosen area where you’d like to place your phone with alcohol pads. For best result, please make sure the mounting surface and base of mount adhesive clear cleaned completely before attaching a new 3m adhesive stickers. As for the 3m adhesive tapes, if you find the phone holder adhesive hard to peel, please try to press it back and peel again.
  • Easy to use: You need to remove the used 3m tape of phone car mount and clean up the mounting surface with alcohol pad included until fully dry before installation, then place a new 3m adhesive stic....
Check Stock

Randconcept 3-in-1 Tablet Holder Car Air Vent Mount - [ Strong Suction Cup Version ] Universal Dashboard Windshield Cradle for iPad iPad Mini Galaxy Tab | Fits All 6 - 10.5 Tablets

  • ...4, Nexus 9 tablet, Sony Opera Z3 Compact, Amazon Fire HD 10 7 8, Lenovo Tab S8, Lenovo A10 Tablet ,etc..
  • MOUNTING WITH SMOOTH & FLAT SURFACE: Thanks for provided PVC plate and 3M VBH adhesive, upper part PVC plate provides smooth and flat surface for tablet car mount while bottom Sticky 3M PE foam adhesive fixed dashboard textured surface!.
  • 3 WAYS TO ADJUST : This dashboard car mount has 3 different ways to move and adjust: adjustable arm length, rotatable arm, and a 360 degree joint ball, they help you find the most suitable angle for safe driving..
  • TWO-STEP LEVER FOR GRIPPING SURFACE: Two-step lever on the suction cup provides strong gripping on dashboard, keeping it securely fixed throughout your drive..
  • 100% RISK-FREE PURCHASE: At Randconcept we know our customers want nothing but the finest which is exactly what we offer. From using the highest quality materials to using state of the art car tablet mount , we take all the right steps to make sure you get the finest. We’re so confident that you’ll love our sticky pads that we offer a 100% Customer Satisfaction Warranty so that you know you’re getting exactly what you pay for!.
Check Stock

ARKON GN079WD Replacement Upgrade or Additional Windshield Dashboard Sticky Suction Mounting Pedestal with 3-Inch Arm for Garmin nuvi GPS

  • Fits Garmin nuvi devices with 17mm swivel ball mounting pattern.
  • Sticky suction base provides a maximum surface bond on smooth surfaces.
  • Suction mount arm adjusts vertically and provides 360-degree rotation.
  • This mount package includes only the Sticky Suction Mounting Pedestal with 3-inch articulating arm and 17mm ball head, and an optional 3M adhesive dashboard mounting disk. (The above listed Garmin nuvi devices should include a 17mm swivel ball-compatible holder.
Check Stock

Gecko-Loc ???? Clear Acrylic Adhesive Disk for Mounting Suction Cup Bath and Shower Accessories - Package of 2

  • ???? The 2 3/4 Inch (70 mm) round adhesive disk allows suction cup bath and shower accessories to adhere to any surface.
  • ???? Clear acrylic, so bath accessory mounting installation does not show..
  • ???? Strong, long lasting hold up to to 10 pounds, using 3M VHB foam adhesive..
  • ???? Contains 2 Disks – Compatible with all Gecko-Loc products.
  • ????No Drilling, easy to install and remove without damaging the surface..
Check Stock

iSaddle CH01C 1/4 Thread Camera Mount Holder Mini Adhesive 16mm Base - Dash Cam Permanent Tripod Windshield/Dashboard Mount Holder Fit Sony/Ricoh/HP/GoPro/Oculus M4 M6 Screw Join Ball Included

  • Ideal For Digital Cameras With 1/4 inch or 5/32 inch Thread Mounting Pattern (M4 & M6 Screw Join Ball Included).
  • Compatible With 3M Double-Sided Adhesive Mount Stands Well In Your Windshield Or DashBoard or Rooftop Compatible With 3M Double-Sided Adhesive Mount....
  • Swivel Ball Adapter Head Provides Flexibility For Positioning The Camera Fits Sony/Ricoh/HP/GoPro/Oculus And More.
  • Get Maximum Holding Strength By Attaching To a Clean And Smooth Surface, Easy To Get a Customized Holder With iSaddle Mounting Kit.
  • Purchase Now, Risk-Free, 100% MONEY BACK GUARANTEE IF ANYTHING GOES WRONG WITHIN 365 DAYS!.
Check Stock

Sticky Adhesive Replacement for Dashboard Suction Cup Mount, 80mm (3.15') VOLPORT 4pcs 3M VHB Circle Double-Sided Extra Strong Adhesive Sticker Tapes for Dash/Camera/GPS/Ipad/Car Phone Sucker Holders

  • 1.[ Designed for Suction Cup Mount] Volport 3M round flat adhesive stickers fit for dashboard suction cup mount cradle,make your sucker stronger.It is also compatible with dash cam, GPS, car cell phone mount, iPad, tablet holder, soap dispenser, bathroom shower caddy / head /shelf /rod/, suction adhesive base/car clips, dashboard pad mounting disk, hook, towel rack/ring, rv, backup camera screen, hanging hooks, ect.You can also cut or trim the two sides sticky tabs to any smaller size you need..
  • 2.[ Genuine 3M Heat Resistant Tile Semi Permanent Sticky Adhesive Sheeting Disc Replacement ]The high temperature resistance performance of these suction cup adhesive back for dash cam mount/stainless steel holders/decorations/security camera/shower washcloth holder/towel bar/shower walls/motion sensor light/hanger/picture/hottub/kitchen/sink/glass doors/aluminum toilet paper holders reaches 120°C+，even on hot summer days in Texas,you can also use it safely, no more worries in cold weather, too..
  • 3.[ Very High Bond Stickiness ]: The adherence of these thin durable 2-sided circular waterproofing foam adhesive stickies parts pads is 40% stronger than the ordinary glue on the market. This 3M double face strength sticky part big adhesive backing dot is also....
Check Stock

Mob Armor MobNetic Maxx - Magnetic Phone Mount - Cell Phone Holder - Mobile Phone Holder for Car Truck Boat ATV - Smartphone Mount & Holder - Compatible with iPhone and Android

  • MAGNETIC SWIVEL DASH MOUNT: CNC machined aluminum swivel includes a Powerful Neodymium Magnet to hold your smartphone securely in place and 3M VHB....
  • EASY TO INSTALL: Simply clean the dashboard with the supplied wipe and firmly press it in the desired spot for 1 minute. For best results, allow the....
  • DASHBOARD MOUNT COMPATIBILITY: Compatible with all Rokform Magnetic Cases, but also includes 2 metal plates enabling universal mounting capabilities....
  • MAGNETIC TECHNOLOGY: Specially designed Neodymium magnet will not negatively impact your GPS, credit cards, Wi-Fi, Apple Pay, Bluetooth, camera, or....
  • ROKFORM WARRANTY: We offer a 2-year warranty on our entire catalog, along with 5-star customer support. If you have any issues with your purchase,....
Check Stock

Dashboard Pad Mounting Disk for Suction Cup, 95mm (3.74') 3M Heat Resistant Adhesive Disc for Dash Camera Windshield Holder, GPS, Tablet, Car Phone Bracket Base with Sticky Adhesion Replacement 3 Pack

  • Broad Compatibility: Adhesive mounting disk 95mm fits any suction cup, work with various dashboard surfaces,windshields or windows, to solve the problem of suckers falling off. It provides a 3.74" circular glass-like flat surface for securing dash suction cup phone cradle, windshield cell phone holder, gps navigation ,receiver, car tablet stand, outdoor camera car mount,car decorations, wireless charger , shower wand suction cup holder,phone magnetic mounting system,grab bars,radar detector,ect..
  • 3M VHB Self-Adhesive: These PVC plastic silicone plate with extra strong adhesive gel can hold up to high temperature(120°C). The stickiness of the powerful sticking discs is 40% higher than ordinary two sides sticky glue. The dash mount adapter plate with double-stick tape for car dash is heat proof and waterproof. No matter in hot summer or cold winter, you can use it without worry. Auto ​smartphone mounts glue pad suction pump base is firmly fixed in flat dash, windscreen and more..
  • Easy to Use: The smooth heavy duty dash mounting pad comes with alcohol wipes. Using it to clean the selected dashboard surface before installing, after the surface is fully dry, peel off red adhesive film from the dash suction cup mount plate and attach the vacuum sucti....
Check Stock

Car Phone Mount Magnetic,APPS2Car Dashboard,Windshield and Air Vent Mount,Phone Holder for Car,Universal Magnetic Phone Car Mount with Powerful Suction Cup,Built-in Strong 6 Magnets for all CellPhones

  • Multi-function: 3 in 1 design, this phone mount for car come with suction cup and air vent base,can be used in dashboard, windshield and air vent. Industrial-strength suction cup base with strong sticky gel and 3M VHB sticky dashboard pad, mounting the car phone mount firmly on the dashboard or windshield or other surface.Twist-Lock base, Tighten the nut to clamp the air vent blade firmly, longer air vent gripper base will not block the air outlet..
  • Powerful Magnetic Force: This magnetic car mount build in 6 pieces of N52 strong magnets, magnetic force is much stronger than other mount that only 4 pieces of magnets. Securely holds your phone in place even with your car on the bumpy of roads and with the heaviest of smartphones..
  • Broad Compatible:This car phone holder mount compatible with iPhone 13 13 Pro Max 13 Pro 13 Mini 12 12 Pro Max 12 Pro 12 Mini 11 11 Pro Xs Xs Max, Samsung Galaxy S21+ S21 S20 S20+ S10 S10+ S10e S9 S9+ S8 S8+ S7 S6, Note 20 Ultra 20 10 9 8 6 5, Nokia etc.all smartphones, although with thick case. And the suction cup base and 3M VHB dashboard pad fits well with most flat surface(not include leather, vinyl surface). Twist-Lock air vent base work well with vertical and horizontal air vent..
  • Adjustable View Angle for Safe Driving: 36....
Check Stock

Phone Mount for Car Phone Holder [Military-Grade Suction & Stable Clip]Car Phone Holder Mount Windshield Dashboard Air Vent Universal Cell Phone Automobile Mount Fit For All iPhone Android Smartphones

  • Upgraded 3 IN 1 Car Phone Mount: Phone mount for car is equipped with a stronger suction cup, thinner vent clip, and an innovative support ring for extra support, which can be freely mounted on the dashboard, windshield, and air vent. Suitable for most cars, pickup trucks, SUVs, trucks, and taxis. A good helper for Uber and Lyft drivers..
  • Freely Adjust: Cell phone holder car with a telescopic arm extends from 3.7 inches to 5.9 inches which can adjust the distance between you and the car phone holder. The phone mount features a highly flexible ball joint 360 rotation for unlimited viewing angles..
  • Heat-Resistance Suction Cup: Car phone holder mount is equipped with a double-lock suction cup and is made from heat-resistant TPU material that will not come off the dashboard even in hot conditions. The additional 3M dashboard pad provides a smooth surface that can be mounted anywhere for convenient driving. NOTE: Not recommended to use the dashboard pad for windshield mounting..
  • All-Around Protection: Car Phone Holder is armed with an innovative hollow silicone rubber, which is more stable with other common silicone rubbers....
Check Stock