Top 4 Gear Reduction Motor

PROGRESSIVE AUTOMATIONS 12V Industrial Linear Electric Actuator. 6 in. 330 lbs. Stainless Steel Rod, High Force, Brushed DC Motor, Durable Stroke for Marine, Automation, Robotics PA-09-6-330

• 【Specification】: Stroke: 1.2inch-6.5inch (Adjustable).
• Rated Voltage: DC24V. Under the same 24V voltage, the closer to the axis, the greater the pushing force. The maximum pushing force is 7.5kg. The pushing force will be reduced by about half every 1 centimeter of movement outside the axis..
• 【Aluminum Alloy Material】: The surface has been polished 27 times, the aluminum body efficiently dissipated the DC motor heat, it can make the motor stays cool to the touch even under load..
• 【TORQUE】: When the Rocker Arm is Closest to the Axis AND voltage is 24V, the maximum pushing force can reach 15 lbs. However, with the decrease of voltage and the Rocker Arm is Far Away from Axis, the Torque will be smaller.The minimum torque is 3.2 lbs..
• 【Stroke Adjustable】: The stroke can be adjusted by changing the position of the screw on the slide rail. The stroke of this product can be adjusted according to the needs of users..
• 【Metal Gear Reduction Box】: All metal gear, you could use gear grease in the gear reduction box. In this way, the friction will be reduced and the machine will work more smoothly..

Capresso 444.05 Carafe, 10 cup, Black

• PRECISION GRINDING: Commercial-grade, solid steel conical burrs with advanced cutting design.
• WIDE GRINDING RANGE: From ultrafine Turkish to French Press coarse and everything in between.
• PRESERVES AROMA: Gear reduction motor grinds slow with reduced noise and little static build-up.
• LARGE CAPACITY: 8.8 ounce bean container and 4 ounce ground coffee container.Watts/Volts/Hertz: 100W/120V/60Hz.
• EASY TO CLEAN: Removable upper burr allows access for easy cleaning.

Yahboom 4WD Robot Chassis Kit Robot Smart Car Aluminum Chassis Platform Kit with 4 TT Motor and Smart Car Wheel,for UNO/Raspberry Pi

• Smart 4WD robot car chassis with 4 rubber wheel/TT DC Gear Motor, horsepower fullness, Operating voltage: 3V - 6V..
• DC Motor Reduction Ratio: 1:48 (3V Motor No-load speed 125RPM)..
• Robot chassis kit made of Aluminum material, Size:239.6*181.7*3MM, Maximum Load 2000g..
• With many circuit mounting holes, users can add some micro-controller (such as Raspberry Pi/Jetson Nano) and sensor modules to realize function of....
• This 4WD robot car chassis convenient installation, firm and reliable..

American Orthopaedic Cast Cutter, Replacement Blades Titanium Nitride Coated 2.5” (6.1cm)

• SCOPE OF APPLICATION--This electic plaster saw is used for the removal of plaster bandage after fixed reduction, suitable for all types of plaster bandage, especially suitable for all types high polymer bandage..
• OPERATORS SAFETY--Electric motor adopts double insulated protection device to ensure safety for the operators..
• PATIENT SAFETY--The plaster saw uses micro motor with low noise, small vibration and speed adjust from large to small, in the actual test 1-5 gear, gently across the skin will not be injured..
• OPERATION OF PLASTER REMOVAL--Set the machine to gear 5 or 6 and cut the surface of the plaster. The closer it is to the skin, the slower it should be, turn to low gear..
• REPLACe BLADE--The blades of plaster saw are consumable, you can buy replacement blades from our shop..

Capresso Infinity Conical Burr Grinder, Black 8.8 oz

• PRECISION GRINDING: Commercial-grade, solid steel conical burrs with advanced cutting design.
• WIDE GRINDING RANGE: From ultrafine Turkish to French Press coarse and everything in between.
• PRESERVES AROMA: Gear reduction motor grinds slow with reduced noise and little static build-up.
• LARGE CAPACITY: 8.8 ounce bean container and 4 ounce ground coffee container.Watts/Volts/Hertz: 100W/120V/60Hz.
• EASY TO CLEAN: Removable upper burr allows access for easy cleaning.

RCA VH226F Outdoor Antenna Rotator

• Programmable Memory: set up to 12 TV or FM station directions for automatic antenna positioning.
• Infrared remote control allows you to fine tune your outdoor antenna easily from inside your home for a perfect picture.
• Digital display indicates preset and antenna position during operation.
• High gear reduction locks motor in place for a stable antenna.
• High precision gear mechanism provides precise and accurate positioning for each channel.

Granatelli Motor sports 307530K 3.0' (76 mm)  Electronic Exhaust Cutout - Dual System - Stainless Steel

• CNC 6061 Aircraft Quality Aluminum Body Construction.
• “Smart Chip” Controlled Motor Offers “One Touch” Operation Rocker Switch.
• High Torque DC Gear Reduction Driven Motor Insures Total Open and Total Closed.

Encoder Metal Gearmotor 12V DC High Speed 600RPM Gear Motor with Encoder for Robotics

• ✔Product type: DC Gear motor with two-channel Hall effect encoder.
• ✔Main Body Dimensions:74.8 x 25mm / 2.95in x 0.99in (L*D).
• Out Shaft Dimensions: 11 x 4mm / 0.433 x 0.1575in (L*D) with 10 x 0.5mm / 0.39 * 0.017inches flat cut off.
• ✔Single Output 120 Pulses Per Revolution: Gear Reduction Ratio: 1/10, Each Loop Output Pulses: 12PPR 10*12=120PPR.
• ✔Wiring Diagram: Red - Motor power terminal (+).
• ✔Application:Suit for Projects Such as Robotics,RC Car Model,Custom Servo, Arduino and 3D Printers,DIY Engine Toy..

Hitachi Automotive Products PSL100 Super-Lite Starter for Chevy V-6, Small Block and Big Block Engines with 1.2 kw

Variable Speed Electric Gear Motor, AC110V 15W 5K High Torque Single-Phase Gear Reduction Motor 270 RPM/min with Speed Controller

• 【Main Parameters】- Name: Geared ac motor.
• 15W Gear Motor: 70mm*70mm*134mm, Axis Length 30mm.
• 【Wide Applications】- This gear reducer motor is widely used in packaging, printing, textile, dyeing, chemical, food, construction industries. Suitable for advertising, office, instrumentation, stage lighting, automatic warehouse, parking access control system and other equipments..
• 【Note】- Speed ratio 1:5(270 rpm/min), gearbox without gearbox is 1350 rpm/min.【Warm Tips】Based on the industrial standard, to meet different needs of customers, our motor does not include the power cord, you need to purchase the power cord to connect..
• 【100% Customer Guarantee】- Our products are shipped from US warehouses, we will ship your order asap through logistics such as UPS/USPS/FedEx. If you have any problems, please feel free to contact us. We will try our best to solve your problem..

BAOSHISHAN Electric Cast Cutter Plaster Saw Cast Saw for Plaster Bandage with 3 Saw Blades 110V Red

• SCOPE OF APPLICATION--This electic plaster saw is used for the removal of plaster bandage after fixed reduction, suitable for all types of plaster bandage, especially suitable for all types high polymer bandage..
• OPERATORS SAFETY--Electric motor adopts double insulated protection device to ensure safety for the operators..
• PATIENT SAFETY--The plaster saw uses micro motor with low noise, small vibration and speed adjust from large to small, in the actual test 1-5 gear, gently across the skin will not be injured..
• OPERATION OF PLASTER REMOVAL--Set the machine to gear 5 or 6 and cut the surface of the plaster. The closer it is to the skin, the slower it should be, turn to low gear..
• REPLACe BLADE--The blades of plaster saw are consumable, you can buy replacement blades from our shop..

CHANCS TYC-50 Synchronous Motor 12V AC 5-6RPM CW/CCW 4W Gear Motor Fan Motor

• This is a TYC-50 AC 12V 5-6RPM synchronous motor,small power consumption, low noise, small size, light weight, easy to use. The reduction gear is....
• 【Specification:】 Product Name : Synchronous Motor； Model : TYC-50； Shaft Diameter: 7mm ； Shaft Length: 16mm； Direction :....
• 【Application:】 Widely used in hand-made, school project, electric fan shake heads, heaters, Christmas tree, prayer cylinders, air conditioners,....
• 【About custom:】Motor shaft, line length, speed, voltage can be designed according to customer requirements. If you need other models of motor, you....
• 【Attention:】 The applicable voltage of this motor is AC 12V, using DC power supply, the motor does not work.