Top 4 Ton Jack

BEETRO 3 Ton Electric Car Jack 12V Scissor Jack Lift with Electric Wrench, Electric Jack for Car Sedan SUV Tire Changing

  • RATED CAPACITY : The maximum load capacity of BEETRO car jack is up to 3 ton(6600 pounds), lifting height is 5.5 -16.54 inches. Two removable raised heads are respectively designed for vehicles of different heights, suitable for most vehicles under 3 ton, Sedan, SUV, MPV etc. NOTES: Never used the jack on sloped ground. Never use it on truck or over 3 ton vehicles. Start car engine before operation,ensure sufficient electricity..
  • TWO WAY POWER SUPPLY : This 12v jack is cigarette lighter or car battery powered, and comes with a 11.5 foot power cable, long enough to go through the 4 tires without changing the power source..
  • EASY TO USE : Electric scissor jack is simple to operate, just press 2 switches to lift or lower your car, get rid of laborious and tedious manual working. It just takes about 2 minutes to lift a car, greatly cut repairing time. Perfect for car's owners change tire in emergency, especially best choice for women..
  • HIGHER SECURITY: This 3 ton scissor jack adapts heavy-duty steel construction which features to strong bearing capacity and distortion resistance. It will automatically stop lifting when it r....
Check Stock

OTC UA22 22-Ton Under Axle Jack with Air Assist

  • OTC's UA22 22-Ton Under Axle Jack features air-assist operation and a self-retracting, spring return with a long, 47-1/4 in. T-handle that lets you easily position the jack under vehicles with long overhangs.
  • One pull of the handle activates the self-retracting, 4-1/2 in. stroke, 22-ton capacity ram, without having to crawl underneath the vehicle, while large rubber-tired steel wheels ensure maneuverability and movement on most types of terrain.
  • 3 inch diameter, round saddle, with center notch and 3 saddle attachments - 3/4 in. for 17-3/4 in. lift, 1-15/16 in. for 18-15/16 in. lift, and 3-7/8 in. for 20-2/3 in. lift, allowing height adjustments based on vehicle being lifted.
  • Welded hydraulic pump and cylinder construction provides increased strength and leak prevention.
  • Chrome plated ram offers additional rust resistance.
  • Wiper seals protect hydraulic system from contaminants.
  • Specifications: 22-ton capacity, 4-1/2 in. cylinder stroke, 4-1/4 in. extended screw length, 90-145 PSI, 8.27 in. to 20-2/3 in lifting range using longest saddle, 69.87 in. reach, 8.27 in. frame height, 11.73 in. x 22.63 in. footprint, 100 lb. weight.
Check Stock

BESTOOL Jack Stands 4 ton Jack Stand with Security Locking Pins, 8,000 lbs Capacity, 1 Pair, Black

  • BESTOOL jack stands uniquely designed circular base pads flat top rubber saddle protects the car frame better than the traditional curved axle post jacks stands. Provide maximum stability and safety, non-slip pad can be disassembled, replaced..
  • This car jack stand features mobility pin height adjustment mechanism provides 7 adjustable positions. Making it flexible for all of your needs and provides added security..
  • The rubber circular base pad protects against scratching paint. Stand has a powder coated finish to prevent rusting.The minimum height of this jack is 13.4 inches and the maximum height is 19.9 inches with a 4 ton (8,000 lb) load capacity..
  • Jack stands 4 ton constructed of high-grade forged steel with a welded frame design for durability.Wide pyramid foot base provides added strength and stable support..
  • This jack stand is perfect for modern low ground clearance cars. it handles a wide range of vehicles including small cars, SUVs, and light duty trucks, jeeps, ATV's, UTV's, and more..
Check Stock

VEVOR Hydraulic Long Ram Jack, 4 Tons/8818 lbs Capacity, with Single Piston Pump and Flat Base, Manual Cherry Picker w/Handle, for Garage/Shop Cranes, Engine Lift Hoist, Red

  • Handles up to 4-Ton/8818 lbs: This 4-Ton capacity long ram hydraulic jack helps you convert your existing hoist to a convenient and fast one. A quick way to raise loads without the backache. A must-have for hydraulic cranes, engine hoists, and a wide variety of applications..
  • 24" -43.7" Lifting Range: Minimum height: 24 in/61 cm. Maximum height: 43.7 in/111 cm. The long ram hydraulic round bottom jack provides an ample 19.7 in/50 cm stroke for the optimal lift of objects up to 4 ton/8818 lb. in weight. And the slow release function for reliability and security..
  • Reliable & Durable Jack: Large diameter hydraulic steel cylinder unit results in lower oil pressure needed to move the load, which helps to reduce wear and extend service life. The piston-ram is treated and polished to resist skiving and utilizes a Y-Style polyurethane sealing ring with a backup ring, preventing the load from falling slowly or bypassing oil drift..
  • Labor-saving Long Ram: Long ram jack features a convenient handle with a rubberized comfort grip. The flat base allows the jack mounts directly onto most shop cranes. And the glide-action pressure pump is designed to lift with minimal muscle and effort..
  • Sturdy Steel Construction: Durable frame is constructed of high-grade steel and bu....
Check Stock

BAOSHISHAN 4 Ton Bottle Jack Double Ram 6-1/4\ to 15-3/8\ Lifting Range Hydraulic Jack Car Jack Portable with Carrying Case

  • [DOUBLE RAM] - The double-ram design plus extension screw top means you have 3 stages of lifting stroke, which has a better range of motion than a traditional single ram 4 ton bottle jack..
  • [BETTER RANGE OF MOTION] - The 6-1/4" starting height allows stubby bottle jack to fit most car clearance, and it has a double ram design with extension screw, which would fully extend up to 15-3/8"..
  • [WITH CARRYING CASE] - The double ram bottle jack with case is easy enough to store away in the vehicle or garage. And the color of the compact box is random, BLACK or GRAY. If the box you received is damaged, please do not hesitate to contact after-sales service to replace it..
  • [SAFETY VAVLUE] - Each jack is tested for safety. The secure valve will automatically protect jack hydraulic system when overload. Equipped with a high-quality, glide-action pressure pump which is designed to lift with min effort..
  • [SCREW TOP] - Don't forget to screw the 2-3/8" tip up before using the 4 ton jack. It allows the hydraulic jack to be adjusted to accommodate desired work height while X-shaped top adds versatility. Thickened steel base increases stability and strength..
  • [WARRANTY] - BAOSHISHAN provides ONE-year Warranty for the double ram jack. If there is any oil leakage, damage or ma....
Check Stock

Pro-LifT Hydraulic 1.5 Ton Trolley Jack Car Lift with Blow Molded Storage Case - 3000 LBS Capacity Orange

  • Pro-Lift PL2930 Floor Jack is a 1.5 Ton car jack with welded Steel frame construction for strength and duability. It gives you the ability to lift from 5-5/16 inches to 11-3/4 inches..
  • Hydraulic trolley jack is constructed with the heavy duty steel. It features the front wheels with the rear casters for the maneuverability. The large swivel saddle provides you with the easy jack positioning and user safety.
  • This 3000 Lbs trolley jack features an overload valve bypass system to prevent jack damage and user injury, and features the compact lightweight design with the carrier handle to easily transport from one location another..
  • In additional, this 3000 Lbs car jack is packed in a blow mold storage case, which gives you the ability to easy store in your garage or trunk when not in use..
  • This 1.5 Ton car jack is ideal for auto repair services in your home garage and on the road. In addition, it is covered with 1-Year warranty from the date of the purchase..
Check Stock

IMAYCC Scissor Jack for Car - 2 Ton (4409 lbs) Car Jack Kit with Saving Effort Ratchet Design,Car Tire Jack for Auto/SUV/MPV (2 Ton)

  • 【 LOAD CAPACITY 】Car Lifting Range from 3.9" (100mm) to 15.2"(385mm). Max Load weight: 2.0 Ton (4,409 lbs). Car Jack Net weight 4.84 lbs (2.2kg)..
  • 【 UPGRADED SCISSOR JACK 】Bi-directional mechanical Design , Both sides move up at the same time, 90% less effort required to lift your vehicle and 2 times lifting speed compared with others..
  • 【 MORE STABLE & DURABLE 】Thicken and Enlarged base plate ensures a secure footing, Reinforced Rolled edges and made of Heavy-duty steel can withstands high pressure..
  • 【 UNIVERSAL CAR JACK 】Portable Scissor jack 2Ton Suitable for most vehicle: Sedan, Coupe, SUV, MPV, Hatchback, Crossover, Wagon and More.a good tire change kit for your vehicle..
  • You can also get a 1 year worry-free after-sale service( free exchange or 100% refund if product was defective as quality problems ).
Check Stock

E-HEELP Electric Car Jack 3 Ton 12V Scissor Car Jack Electric with Impact Wrench Electric Car Jack Kit for Car SUV Sedan Tire Changing

  • [Amazing Electric Car Jack] Electric scissor jack for car takes 1 min only to reach Max. Height(lifting rang: 4.72~16.54 inch). This scissor car jack 3 ton nearly matches all the vehicles that less than 3 ton like cars, SUV, sedan..
  • [More Versatile Than You Can Imagine] This portable scissor jack applied whether in your home garage, road trip, car repair shop, farm or halfway emergency. Car jack kit and the power cable connectors are waterproof, feel free to use on rainy days. This electric car jack kit contains a portable ergonomic-designed electric impact wrench with two scokets(17/19 mm & 21/23 mm), matching more vehicles with different size of lug nuts in the market..
  • [Time-saving Electric Impact Wrench] The portable impact wrench installed with a powerful motor and precisely-designed speed control system, makes it possible to screw/unscrew in a very short time. Compare to traditional manual wrench, it improve the efficient by 95% more. If you are a person who are not used to use ordinary floor jack and have never changed a flat tire before, you would be amazed of how easy and quick this thing works..
Check Stock

Floor Jack,2 Ton Heavy Duty car jack,Lifting Range 5-1/8" to 13",Hydraulic Low Profile Trolley Service Floor Jack,4,000 lb Capacity,Blue(AA051)

  • Floor jack has a 2 ton (4,000 lb) load capacity and features a minimum lifting height of 5-1/8 and a maximum height of 13".
  • The 2ton floor jack jack equipped with (2) large steel casters and (2) 360-degree swivel casters for smooth maneuverability.
  • The floor jack has a large saddle surface area for better contact with the load being supported.
  • Heavy duty steel construction provides long term durability，Built-in safety valve provides overload protection.
  • Service jack is built for extra lifting and maneuverability for all load lifting needs. Heavy-duty steel construction provides stability and positioning..
Check Stock

OEMTOOLS 24835 Hydraulic Floor Jack, 2.5 Ton Low Profile Automotive Jack, Quick Vehicle Lift Up to 14 Inches, Portable Hydraulic Lift, Fits Under Nearly Any Vehicle

  • HYDRAULIC CAR LIFT: The hydraulic jack is designed to lift 2.5 ton vehicles with minimal effort when performing services or maintenance work.
  • Hydraulic jack lift is built for performance and ease of use.
  • Valuable shop floor jack or garage floor jack.
  • LOW PROFILE FLOOR JACK: Our low profile car jack makes working with low-clearance vehicles much easier, getting under vehicles that standard hydraulic car jacks cannot fit.
  • These low profile floor jacks have a maximum lifting height of 14 inches.
  • SAFE TO USE: These floor jacks for cars, trucks, SUVs, and many other vehicles feature an overload system that prevents use beyond the rated capacity of 2.5 tons.
  • 2.5 ton floor jack can safely fit under and lift nearly any vehicle within its capacity.
  • PORTABLE CAR JACK: This car lifter jack comes with floor jack casters for convenient portability.
  • Heavy duty floor jack features (2) 360 degree rear swivel casters for easy maneuvering.
  • Easily transport this portable car lift around your garage.
  • PRODUCT SPECIFICATIONS: (1) Vehicle Hydraulic Jack.
  • (2) 360 Degree Rear Swivel Casters and (2) Large Front Casters.
Check Stock

American Lifting AL2301 Floor Jack 3 Ton - Professional Heavy Duty Hydraulic Rapid Lift Floor Jack for Service Car Truck SUV Red

  • AL2301 is American Liftinng 3 Ton heavy duty car floor jack that built with the strength and duability. It gives you the ability to lift from 5 inches to 22-7/8 inches. With Feature of Rapid Lift, it provides fast, no load lifts to the jacking point in approximately 1/4" to 3/4" increments..
  • Heavy gauge contruction, cast iron lift arm and the flanged side plates add the strength and rigidity. The large swivel saddle with the diameter of 6-3/4 inches to provide you with the easy jack positioning and user safety.
  • AL2301 Garage jack features in-line pump assembly assures long life and no off-center forces for ease in pumping, aligning and reduce wear. And, its sealed hydraulic pump adds the additional durability..
  • Patented built-in by-pass device protects hydraulic system from over pumping damage. It also features the metered release system and U-Joint release mechanism to allow for precise load control..
  • This 3 Ton heavy duty service jack is ideal for auto repair services in the shop and garage. In addition, it is covered with 1-Year warranty from the date of the purchase..
Check Stock

SPECSTAR Under Hoist Support Stand 3/4 Ton 1500Lbs Capacity Jack Stand Lifting from 1.3 to 2 Meters with 12 Inch Diameter Steel Base

  • Pro-Lift Floor Jack 2 Ton features 4,000 lbs maximum capacity and is constructed with heavy-duty steel for strength and durability. It gives you the ability to lift from 3-5/8 inches to 13-3/8 inches..
  • A hydraulic trolley floor jack is constructed with heavy-duty steel. It features the front wheels with the rear casters for maneuverability. The large swivel saddle provides you with easy jack positioning and user safety..
  • This low-profile jack for the car features an overload valve bypass system to prevent jack damage and user injury. F-757G car jack low profile features the compact design with the carrier handles to easily transport from one location to another..
  • The patented built-in by-pass device protects the hydraulic system from over-pumping damage. Before using the jack, insert provided handle into the handle sleeve, then pump 6 to 8 full strokes. This will help release any pressurized air which may be trapped within the reservoir.
  • This 2 Ton low-profile jack is ideal for auto repair services in your home garage. In addition, it is covered with a 1-Year warranty from the date of the purchase..
Check Stock