Top Ac Control Board

Microsoft Wireless Optical Desktop 1000 (PC & Mac)

  • Strong 1000-Watt PSU providing stable power source for ATX12V / EPS12 desktop computer with dedicated PCI-Express graphic card. ** Attention: DOES NOT support Bitcoin/Ethereum mining application.**.
  • High efficiency means less heat dissipation plus less electricity wasted: typical 85.77%, average 84.16% -- over 82 percent across all load level, meets and exceeds 80plus standard. Full range AC input Active PFC technology: 100- 240V auto-select..
  • Quad blue color LEDs turns on when the PSU is on. Smart fan controller with on-board thermostat dynamically control fan speed to ensure ultra quiet operation..
  • POWER CONNECTORS INCLUDED: 24pin (20+4) Main, 1 x 4+4 12V (supports standard 2x2 P4 or 2x4 8pin 12V board), 2 x 6+2 PCIe (for graphic card that requires 6pin and/or 8pin), (5) SATA, (2) Molex 4pin Peripheral, Floppy Drive.
  • Black casing with black braided sleeving on all cables. Long cables to support standard mid tower chassis or bottom-mount gamer case. UL certified 5-foot safety AC cord and black installation screws are included..
Check Stock

Aoicrie 5Pcs DC 5V 1 Channel Relay Module Board Shield with Optocoupler Isolation Support High or Low Level Compatible Development Board Trigger

  • This Relay Board Maximum load: AC 250V/10A, DC 30V/10A With power and relay action indicator.each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground..
  • Main Specification Peak Load of NO Connector: AC 250V/10A, DC 30V/10A.
  • These Relay Board use photocoupler isolation that has strong driving ability and stable performance.The isolation circuit prevent damages to I / O port by relay switch current.The module has a jumper so you can set rather the unit state changes with high or low signal. Has screw terminals for relay (NC,C,NO) and for input.
  • Using SMD optocoupler isolation, strong driving capability, stable performance.Fault tolerant design, even if the control line is broken, the relay will not operate.
  • And interface design humanized, all the interface can be directly connected through the terminal lead, so convenient..
  • Wide Application These 5V relay board works well with for ARM /PIC /AVR /MCU/Raspberry/CNC machine /etc..
Check Stock

Aoicrie 5Pcs DC 12V 1 Channel Relay Module Board Shield with Optocoupler Isolation Support High or Low Level Compatible Development Board Trigger

  • This Relay Board Maximum load: AC 250V/10A, DC 30V/10A With power and relay action indicator.each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground..
  • Main Specification Peak Load of NO Connector: AC 250V/10A, DC 30V/10A.
  • These Relay Board use photocoupler isolation that has strong driving ability and stable performance.The isolation circuit prevent damages to I / O port by relay switch current.The module has a jumper so you can set rather the unit state changes with high or low signal. Has screw terminals for relay (NC,C,NO) and for input.
  • Using SMD optocoupler isolation, strong driving capability, stable performance.Fault tolerant design, even if the control line is broken, the relay will not operate.
  • And interface design humanized, all the interface can be directly connected through the terminal lead, so convenient..
  • Wide Application These 12V relay board works well with for ARM /PIC /AVR /MCU/Raspberry/CNC machine etc..
Check Stock

Weewooday 15 Pieces 5V Relay Module 1- Channel Relay Control Boards with Optocoupler Isolation High and Low Level Trigger Expansion Board

  • Relay module: this relay board supports high and low level trigger and can be controlled by any 5V digital output of the microcontroller.
  • Parameter details: maximum load of normally open interface: AC 250v/ 10A, DC 30v/ 10A, trigger current is 5mA.
  • The 5v relay control board adopts SMD optocoupler isolation, which has strong driving ability and stable performance.
  • Practical design: with fault-tolerant design, the relay module will not operate even if the control line is disconnected.
  • All interfaces can be provided through directly connected terminal s since the humanized interface design, it is very convenient to use.
  • High compatibility: the relay module can be directly controlled by the 5V logic signal provided by the microcontroller, suitable for 8051, Raspberry Pi, PIC, DSP, ARM, AVR, MSP430, TTL logic, etc..
  • Wide application: this 5V relay board can be applied with Raspberry/ CNC machine/ ARM/ PIC/ AVR/ MCU/ PS4 and more.
Check Stock

ELEGOO 8 Channel DC 5V Relay Module with Optocoupler Compatible with Arduino UNO R3 MEGA 1280 DSP ARM PIC AVR STM32 Raspberry Pi

  • 5V 8-Channel Relay interface board, each one needs 70mA Driver Current.
  • Equiped with high-current relay, AC250V 10A.
  • Each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground..
  • With power indicator,8-way road has a status indicator. With a relay coil to absorb the diode protection..
  • Standard interface that can be controlled directly by microcontroller (Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic).
  • The 8 channels are optically isolated, safe, reliable, anti-interference. Widely used for all MCU control, industrial sector, PLC control, smart home control。For a complete data sheet for this relay board, please download it from: http://dwz.win/UhW.
Check Stock

VEVOR Automatic Opener 1400LBS with 2 Remote Controls Operator Hardware Kit for Security Move Speed 43ft Per Min Electric Rolling Driveway Slide Gate Motor

  • ♚[COMPATIBLE]~ Easy to install, compatible with other accessories, such as infrared sensors, solar panels, alarms and more..
  • ♚[CONVENIENT]~ Use the 4-Button Remotes to Open, Close, Stop Remote control, access to multiple remote controls, use of remote control, do not have....
  • ♚[HUMANIZED DESIGN]~ It works quietly, with a lower decibel than the face-to-face conversation.
  • it's powerful, easy to open metal doors, 15s quick....
  • ♚[DURABLE]~ This sliding driveway gate can work for many years (3 years, the control board is not bad, the door is not too heavy), what kind of....
Check Stock

XYGStudy Raspberry Pi Expansion Board Power Relay Module for Raspberry Pi 4 3 2 Model B B+ A+

  • Raspberry Pi Expansion Board, Power Relay.
  • The RPi Relay Board gives your Pi the ability to control high voltage/high current devices, easily makes normal home appliances become intelligent..
  • Standard Raspberry Pi 40PIN GPIO extension header, Supports Raspberry Pi A+/B+/2B/3B/3B+/4B and later versions.
  • High quality relays, loads up to 5A 250V AC or 5A 30V DC.
  • Photo coupling isolation, prevent interference from high voltage circuit.
Check Stock

Solidremote 12V - 24V Secure Wireless RF Remote Control Relay Switch Universal 2-Channel 433MHz Receiver with 2 FCC ID Transmitters for Garage Door Openers, Cars, LED Lights & More (KIT-1)

  • ... higher RF sensitivity -111dBm superheterodyne module for better long range and more stable performance. Also 433Mhz frequency is less crowded than 315Mhz in USA..
  • EASY & FLEXIBLE # Two independent relay channels can either work together (in latching) for polarity reversing or individually (in pulse / hold) to control different electronics, such as one channel for garage door controller unit, the other for entry lights. Easy programming & easy to use DIP switches working mode selection between pulse / momentary, hold / toggle and latching mode..
  • ENCLOSURE # Designed to work both indoor and outdoor, default enclosure supplied protects the inner radio receiver circuit board safe from rain or other tough weather, while customer can also use chemical glue or epoxy adhesive to seal the wiring holes after setup, providing IP55 equivalent waterproof protection level. Mounting holes are provided for easy installation to walls etc using screws..
  • INTERFACE # 3-Level efficient switching power supply system. Our 202U receiver board accepts 12 volts – 24 volts AC or DC wide supply voltage range (min. current rating is [email protected] DC). Each relay can switch up to 10A @14V DC or 10A @125V AC for resistive load (6A @14VDC for inductiv....
Check Stock

Impedance Analysis Module Wideband Logarithmic Amplifier 1.6mm Thick Double‑sided Board AD8302

  • Has the functions of remote system monitoring and diagnosis, return loss, and AC signal logarithmic ratio..
  • Using Printed Circuit Board1.6mm thick double‑sided board, the whole process of spraying tin to ensure good current passing performance..
  • Precise radio frequency power control, precise gain measurement scale, improve efficiency..
  • Measure gain, loss and phase up to 2.7GHz, dual demodulation logarithmic amplifier and phase detector, input range in 50Ω system ‑60dBm to 0dBm..
  • Various measurements, AD8302 can measure the gain and phase difference of amplifiers, mixers and other circuits..
Check Stock

VU Meter 2x Panel VU Meter Warm Back Light Recording & Audio Level Amp with Driver Board

  • L/GND/R: This driver board with low level signal input terminals for connections are CD players, computer sound cards, the first stage, and other audio signal source device, wiring L, GND, RW respectively: Left, the right channel.
  • Power Consumption:Input AC / DC 12V-15V power supply for the drive plate. (Recommended independent power transformer, or a separate power supply for the winding. the backlight current is 45 mA when drive plate off work.
  • 2 Resistor:R1 and R2 are two adjustable resistors of driver board,which can control the size of the hands swing..
  • Rectifier RegulatorThe backlight DC12V power meter is used for rectifier regulator of the backlight driver board Please notice that the positive and negative head interface..
  • Package Content:2 x VU Panel Meter+1 x Driver Module+1 x Cable.
Check Stock

SENCO 08T125W 8-Gauge 1-1/4 in. Collated Cement Board Screws (1,000-Pack) Pack of 2

  • 08T_W Series 08T125W Cement Board Screw with Nibs, #8 Thread, 1-1/4 in L, Flat Head, #2 Drive, Steel.
  • Cement board to wood screws with exterior finish..
  • For cement board to wood. Fits DS440AC (557.4876), DS425AC (557.4827), DS332AC (264.0720), DS212-18V (264.0662), DS312-18V (305.6512)..
Check Stock

ALMOCN 6Pcs DC 5V 1 Channel Relay Module With Optocoupler Isolation Support High or Low Level Trigger

  • The Relay Board Maximum load: AC 250V/10A, DC 30V/10A.
  • Using SMD optocoupler isolation, strong driving capability, stable performance..
  • Can be set high or low level trigger with jumper cap, to meet the demand of more trigger applications..
  • Fault-tolerant design, even if the control line is broken, the relay will not move..
  • Wide Application,The relay board works well with ARM /PIC /AVR /MCU/Raspberry/CNC machine/ PS4 etc..
Check Stock