Top Ac Solid State Relay

HiLetgo 2pcs SSR-25DA 25A 250V Solid State Relay Module

  • SSR-25DA 25A 250V Solid State Relay Alloy Heat Sink.
Check Stock

4pcs Solid State Relay SSR-25DA DC to AC Input 3-32VDC to Output 24-480VAC 25A 250V Solid State Relay Module

  • 【Model】SSR-25DA 25A 250V Solid State Relay Module.
  • 【SSR-25DA Parameter】solid state module relay SSR-25DA, 3-32VDC/24-480VAC.
  • 【Relay Size】(L*W*H)62×45×24mm/2.48 x 1.73 x 0.94".
  • 【SSR Application】No electric spark, no noise, high switching speed, especially suitable for corrosion, moisture, dust resistant and other harsh environments. Widely used in many automatic control systems.
  • 【Package Included】4pcs SSR-25DA solid state relay module.
Check Stock

MYPIN® Universal Digital TA6-SNR PID Temperature Controller with Relay DIN 1/8 SSR-25DA and K type thermocouple,Dual Display for F/C,7 Output Combinations,Accuracy 0.2%

  • √ ● Dual display for Fahrenheit(F) and Celsius(C)，Range: -1999 to 9999 (depends on the input signal).
  • √ ● Input: Thermo Resistor: PT100, Cu50，Thermocouple: K,Wre3 ~ Wre25 ， Main Output: SSR: Open circuit: 4V, Closed Circuit: 24V 40mA DC.
  • √ ● K type thermocouple Temperature rang:0-800℃, Sensor Dia: 4.5mm, Cable Length: 2m.
  • √ ● Solid state relay SSR-25DA Load Voltage: AC 24-380V, Load Current: 25A, Input Voltage: DC 3-32V.
  • √ ● Packing details: 1 x SNR Temperature Controller( DIN 1/8), 1 x SSR-25DA Solid State Relay, 1 x K Type Thermocouple( 6 Feet).
Check Stock

SparkFun Qwiic Quad Solid State Relay Kit - Attach 4 Solid State relays to a Single PCB - Control Some serious Power All from The Easy-to-use Qwiic Connect System - configurable I2C

  • This kit allows you to assemble up to four of these solid state relays on a single PCB and control them all via I2C from your favorite microcontroller..
  • The Quad Solid State Relay Kit comes with four solid state relays rated up to 40A at voltages between 28-380 VAC so you can switch some serious power with this board all from a single Qwiic connector attached to a low-powered microcontroller..
  • Features: Operating Voltage: 2.5-3.6V (3.3V recommended). I2C Address: 0x08 (Default), 0x09 (Alternate via jumper). Max Current (Through Relay): 40A (24-380VAC). Zero Cross Trigger. Normally Open Circuit Only.
  • Includes: 1x Qwiic Quad Solid State PCB. 4x Solid State Relay - 40A (3-32V DC Input). 8x 4-40 Hex Nut. 8x 3/8in. Phillips Machine Screw - 4-40 Thread. Hook-up Wire 8" - 22 AWG (Red). Hook-up Wire 8" - 22 AWG (Black).
  • Assembly required. Tools are not included. You will need a screwdriver and wire clippers/strippers..
Check Stock

HiLetgo 2pcs SSR-40DA Solid State Relay Single Phase Semi-Conductor Relay Input 3-32V DC Output 24-380V AC

  • SSR-40DA 40A 250V Solid State Relay Alloy Heat Sink.
Check Stock

TWTADE SSR-25AA 25A AC 80-250V to AC 24V-380V Ac to Ac SSR Solid State Relay + Heat Sink

  • Special attention: The current of this product is 10A for a long time.A large heat sink or fan need to be added.Model: SSR-25AA Solid State Relay 25A AC to AC.
  • Heat Sink Mounting Thread Diameter (Approx.) : 0.5cm / 0.19".
  • Heat Sink Total Size (Approx.) : 8 x 4.9 x 4.9cm / 3.1" x 1.9" x 1.9" (L * W * T ).
Check Stock

Aoicrie 5Pcs DC 5V 1 Channel Relay Module Board Shield with Optocoupler Isolation Support High or Low Level Compatible Development Board Trigger

  • This Relay Board Maximum load: AC 250V/10A, DC 30V/10A With power and relay action indicator.each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground..
  • Main Specification Peak Load of NO Connector: AC 250V/10A, DC 30V/10A.
  • These Relay Board use photocoupler isolation that has strong driving ability and stable performance.The isolation circuit prevent damages to I / O port by relay switch current.The module has a jumper so you can set rather the unit state changes with high or low signal. Has screw terminals for relay (NC,C,NO) and for input.
  • Using SMD optocoupler isolation, strong driving capability, stable performance.Fault tolerant design, even if the control line is broken, the relay will not operate.
  • And interface design humanized, all the interface can be directly connected through the terminal lead, so convenient..
  • Wide Application These 5V relay board works well with for ARM /PIC /AVR /MCU/Raspberry/CNC machine /etc..
Check Stock

Aoicrie 5Pcs DC 12V 1 Channel Relay Module Board Shield with Optocoupler Isolation Support High or Low Level Compatible Development Board Trigger

  • This Relay Board Maximum load: AC 250V/10A, DC 30V/10A With power and relay action indicator.each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground..
  • Main Specification Peak Load of NO Connector: AC 250V/10A, DC 30V/10A.
  • These Relay Board use photocoupler isolation that has strong driving ability and stable performance.The isolation circuit prevent damages to I / O port by relay switch current.The module has a jumper so you can set rather the unit state changes with high or low signal. Has screw terminals for relay (NC,C,NO) and for input.
  • Using SMD optocoupler isolation, strong driving capability, stable performance.Fault tolerant design, even if the control line is broken, the relay will not operate.
  • And interface design humanized, all the interface can be directly connected through the terminal lead, so convenient..
  • Wide Application These 12V relay board works well with for ARM /PIC /AVR /MCU/Raspberry/CNC machine etc..
Check Stock

Inkbird SSR Solid State Relay SSR 40DA for PID Thermostat Temperature Controller

  • Model No.: SSR-80DA；If you want to reach 80A, you need to add a large heat sink and fan.
  • output Voltage : 24-480vac；Special attention:This relay cannot be used for more than 30A for a long time.If that actual use current exceeds 15A，It is necessary to separately configure the heat sink..
  • Total size (approximate) : 58 x 45 x 32Mm/2.3" x 1.8" x 1.26" (l*w*t).
  • material : metal, plastic, electronic parts.
Check Stock

CNAODUN PID Temperature Controller Kit 100-240 VAC Voltage with 40DA Solid State Relay，K Type Thermocouple Probe and Heat Sink

  • ♥【One Way SSR output】3,4 port output to SSR,a 40da solid state relay is included in the package.The power supply voltage for this Pid temperature controller is 100-240VAC..
  • ♥【One Alarm Output】6,7 ports are alarm outputs, AC220V/DC30V 3A (Resistive load) ON/NC, also can be used to connect relay..
  • ♥【Supports 2 Wire Sensor Input】Support two-wire thermocouple input, K, E, J, N, W3-25, W5-26 type thermocouple input are available, the default setting is K type thermocouple input.
  • ♥【℉ and ℃ Adjustable】Fahrenheit and Celsius adjustable, default is Fahrenheit, with PID function.
  • ♥【Temperature Digital Display】PV is the current measured temperature, SV is the set temperature, both are displayed simultaneously..
Check Stock

Twidec/Output Single Phase SSR Solid State Relay 80A 3-32V DC to 24-480V AC SSR-80DA

  • Model No.: SSR-80DA；If you want to reach 80A, you need to add a large heat sink and fan.
  • output Voltage : 24-480vac；Special attention:This relay cannot be used for more than 30A for a long time.If that actual use current exceeds 15A，It is necessary to separately configure the heat sink..
  • Total size (approximate) : 58 x 45 x 32Mm/2.3" x 1.8" x 1.26" (l*w*t).
  • material : metal, plastic, electronic parts.
Check Stock

US Automatic 030210 LCR 2 Button Remote Control

  • Detects moving vehicles to automatically trigger your gate to open when exiting your property.
  • Comes prewired with solid state relay output and 55' cable to connect to your automatic gate opener system.
  • Designed specifically for Ghost Controls gate opener systems but will work with many other brands of automatic gate opener systems with 10-16 Volt AC....
  • Should be buried at least 12" below the surface and within 3' of driveway that moving vehicles use to exit property.
  • This allows easy exit from your property for everyone, even family and friends who do not have a remote transmitter in their vehicles.
Check Stock