Top Ac Voltage Tester

Klein Tools NCVT2P Dual Range Non-Contact Voltage Tester 12-1000V AC Visual and Audible Indicators Auto Power Off

  • Non contact voltage tester's dual-range capabilities allow tester to detect from 12 to 1000 V AC or 70 to 1000V AC for a broad variety of low-voltage or standard voltage applications.
  • Electrical voltage tester detects voltage with simultaneous visual and audible indicators.
  • Non-contact detection of low voltage in security, entertainment, communications, environmental control, and irrigation systems.
  • Lightweight, compact tool with pocket clip provides convenient storage and quick access.
Check Stock

Amprobe-2734332 VP-440 Non-Contact Voltage Detector

  • Non-contact voltage tester for detecting A) voltage on cables, circuit breakers, wall sockets, junction boxes, and other electrical wiring.
  • Average-sensing meter helps provide accurate readings when measuring linear loads with a current or voltage that has a sinusoidal waveform.
  • Tester illuminates when AC voltage is detected.
  • Safety rated to European Standard 61010-031 Category III 1000V.
Check Stock

Greenlee - Electrical Kit Gfci Elec Test Instruments TK-30AGFI 10 x 8 x 3

  • Kit includes multimeter DM-25, non contact voltage detector, receptacle tester GT-10GFI and carrying case.
  • Multimeter measures AC/DC voltage up to 600V.
  • Non contact voltage detector safely detects AC voltage.
  • Receptacle tester ensures sockets are wired correctly with additional ground fault circuit Interrupter (GFCI) testing capability.
Check Stock

HURRICANE Non-Contact Voltage Tester and Receptacle Tester Kit, Electrical Socket Voltage Tester/12-1000V AC Voltage Detector Pen, and GFCI Outlet Tester/Receptacle Tester for Standard 3-Wire 120V

  • 【Two In 1 Kit】Comes with a non-contact 12-1000v ac voltage detector, and a receptacle tester to meet most electronic testing needs, ideal for laboratory, education, factory, workshop, and household use.
  • 【Non-contact Voltage Detector】This non-contact voltage detects AC voltage within 12-1000v AC, indicating voltage by flashing red LEDs, It can test all electric appliances in your family, and also has a pocket clip and a tip that fits into outlets or against wire insulation.
  • 【Safe and High Efficiency】The voltage pen tester detected voltage in a non-contact way, so do not worry about there could be any possibility of being shocked by the electricity, as long as the voltage is detected, the led in the tester pen will shine.
  • 【Outlet Tester】Push “GFCI TEST” Button, in the test wiring qualified socket, through the GFCI test simulates the presence of leakage protection inside the connection room to start the power-off action, especially in the kitchen or bathroom. Protect the safety of electricity (recommended once a month test). Quickly determine the correctness of standard 3-wire receptacle L-N-G wiring and read the results by bright red and green LED indicators..
  • 【Wide Application】A set of quick-fix tools provides non-contact detection....
Check Stock

Non-Contact Voltage Tester, Dual Range Voltage Tester AC 12V-1000V/48V-1000V, ENGiNDOT Live/Null Wire Tester, Electrical Tester with LCD Display, Buzzer & Light Alarm, Breakpoint Test (Blue)

  • 【Safety Non-Contact Voltage Tester】Non-Contact Voltage Tester is safer for testing all Electric Appliances in Your Family. The tester with NCV inductive probe for AC voltage Just places the tip near a terminal strip, outlet, or supply cord. When the tip glows red and the pen beeps, you know there's voltage present. The live wire detector can automatically detect the live or neutral wire..
  • 【 High-Efficiency And Convenient 】The tester with LCD display. When the voltage is detected, the alarm will send out green or red light and beep. When the higher the sensed voltage or the closer it is to the voltage source, it beeps at a higher frequency. At the same time, the screen will be red or green, red means the high voltage and live wire are detected, green means the low voltage and null wire are detected..
  • 【DUAL RANGE/ High&Low Sensitivity】The sensitivity/flashlight key can be switched at high and low sensitivity. Detect high and low voltage (AC 12-1000V /48-1000V )Press the S button to adjust sensitivity and adapt low range for doorbells, thermostats, irrigation wiring..
  • 【Multifunction Design 】Use the Non-Contact Voltage Detector in Circuit Breakers, Lighting Fixtures, Switches, Outlets, Wires, and Anywhere You Need it. Bright LED flashli....
Check Stock

AenKall AC Voltage Tester Pen Non-Contact Voltage Detector, Electrical Tester 12V-1000V with LED Flashing and Buzzer Alarm for Live/Null Wire Judgment

  • 【Non-Contact】The voltage tester pen using NCV inductive probe to detect voltage in a non-contact way. You just need to put the probe close to the power supply, when the pen beeps, you will know there's voltage present, so you don't worry about there could be any possibility of being shocked by the electricity. (It can accurately Identify null and live wire, and can be used as Wire breakpoint finder).
  • 【Safe and Easy to Use】The AC voltage detector pen has【CE CAT III600V RoHS Certificate】and It's safe. Easy to use at the same time, The tip of the voltage tester pen glows red and beeping sound. When the higher the sensed voltage is, or the closer it is to the voltage source, it beeps at a higher frequency and the number of glows red will more. You don't have to call a professional electrician if you have it, the voltage tester pen is perfect for DIYers, hobbyists and housewives..
  • 【Multifunction and Portable】The non-contact voltage tester pen comes with an emergency LED torch to support operation in dim environments. It can automatically turns off the power after 5 minutes of no operation or signal detection. Only pocket-sized, the pen hook allows you to carry it in your shirt pocket..
  • 【Wide Range of Tests】The voltage test range of this e....
Check Stock

Greenlee - Electrical Kit-Basic (Tk-30A), Elec Test Instruments (TK-30A), 10 x 8 x 3'

  • Kit includes multimeter DM-25, non contact voltage detector GT-11, receptacle tester GT-10 and carrying case.
  • Multimeter measures AC/DC voltage up to 600V.
  • Non contact voltage detector safely detects AC voltage.
  • Receptacle tester ensures sockets are wired correctly.
Check Stock

Amprobe AT-8020 Advanced Industrial Wire Tracer Kit

  • 【FUNCTION UPGRADE】 KZYEE KM50 Circuit Tester Kit is an upgraded version of KM10, which performs each type of testing modes, like DC Voltage, AC Voltage, Signal Frequency, Duty Cycle, Fuel Injection, Resistance, and Diode.
  • 【QUICK DIAGNOSIS】Quicker troubleshoot and diagnose circuit conditions by switching waveform display from the digital display for AC Voltage, Frequency, Duty Cycle, and Fuel Inject testings by long-pressing the mode button for 3 seconds.
  • 【WIDELY APPLICATION】Works on 12V 100-2000CCA lead acid batteries , including Regular Flooded, AGM Flat Plate, AGM Spiral, GEL and EFB. Also, it is suitable for cars, motorcycles, trucks, ATVs, SUVs, boats, yachts, mowers, and even golf carts and lawn tractors batteries.
  • 【CRANKING & CHARGING SYSTEM TEST】Presents you with the test results (actual cranking voltage & cranking time) of the starter system in milliseconds to indicate if the cranking system is working as expected. Also, the battery load tester conducts a throughout check on the 12V charging system to make sure a normal generator output，perfectly working rectifier diode and under controlled charging current.
  • 【SAFE PROTECTION DESIGN】The battery tester doesn’t emit light, heat or spark, and won’t discharge the battery. It ....
Check Stock

Extech MN24-KIT Electrical Test Kit

  • MN24 Digital Multimeter with large, easy to read display measures AC/DC Voltage, DC Current, Resistance, and Continuity and features Diode and Battery tests.
  • Included 40130 Non Contact Voltage Detector detects AC Voltage from 100VAC to 600VAC with a Flashing LED and Audible beeper.
  • Included ET15 Receptacle Tester tests for faulty wiring in 3 wire outlets with a standard North American 3 prong Plug.
  • Everything you need to stay safe and work smart on DIY home electrical projects.
  • The MN24 KIT includes the MN24 Digital Multimeter, Multimeter Test Leads, 40130 Non Contact Voltage Detector, ET15 Receptacle Tester, Storage Case.
Check Stock

CLHPT VC1018 Non-Contact Voltage Tester，AC 12V-1000V/48V-1000V Electrical Tester Pen Voltage Detector with LED Flashlight Buzzer Alarm Wire Breakpoint Finder (Yellow)

  • NCV non-contact voltage tester：This electrical tester provides non-contact detection of voltage in wires, circuit breakers, lighting fixtures, switches, receptacles and cables. When voltage is detected, a buzzer will sound an alarm and a red indicator light will flash. The buzzer is staggered fast and slow to determine the current AC voltage strength..
  • Adjustable Sensitivity and Dual Range Voltage Detector：This electric testers comes with 2 sensitivity modes, low sensitivity mode (48-1000V AC) and high sensitivity mode (12-1000V AC). Simply press the "S" button to enter the high sensitivity test mode..
  • Safety level： The safety level of the whole machine conforms to CE CAT.III 1000V CAT.IV 600V, and the body is made of high-quality ABS material, with anti-drop insulation. The electrical tester is safe and double insulated, and the body is equipped with a high-performance sensor chip for accurate detection..
  • Flashlight lighting function: The voltage pen tester with flashlight allows you in the dark environment, no longer afraid of not being able to see the location of the measurement, to eliminate the risk of electric shock..
  • Smart shutdown and low power consumption mode：The automatic power-off function can save and extend the battery life. It will....
Check Stock

BSIDE Voltage Tester, EBTN LCD 3-Line Display Voltage Detector, Non-Contact with Adjustable Sensitivity, Dual Range AC Voltage Sensor Pen Live Wire Check Breakpoint Locate with Protect Case

  • Voltage Tester automatically detects and indicates low voltage (12-48V AC) and standard voltage (48-1000V AC) allowing broad application.
  • Non-contact detection of standard voltage in cables, cords, circuit breakers, lighting fixtures, switches, outlets and wires.
  • Non-contact detection of low voltage in security, entertainment, communications, environmental control, and irrigation systems.
  • High intensity, bright green LED indicates the tester is operational and aids in illuminating the workspace.
  • Dual Range testing, select 12-1000V AC or 48-1000V AC.
Check Stock

Voltage Tester Pen Non-Contact with LED Flashlight - 12V to 1000V Dual Range for Broad Application (Voltage Tester Pen)

  • ❤️ Non-Contact Design - The voltage tester features a non-contact and double-insulated design. The NCV sensor automatically identifies the voltage and alerts by sound and light. This voltage detector is safe for electricians, maintenance, service, safety personnel, and homeowners to test live circuits in the workplace or at home..
  • ❤️ Dual Range Voltage Tester - This electrical tester comes with 2 sensitivity modes, high sensitivity mode (12-1000V AC) and low sensitivity mode (48-1000V AC). Simply press the "S" button to adjust the sensitivity for different needs and situations..
  • ❤️ Sound and Light Alarm - When voltage is detected, the voltage tester will flash and beep. You can distinguish live wire and null wire by different sounds and indicators. When all the red lights are on, it means that high voltage and live wire are detected, and only one red light is on to indicate that low voltage and null wire are detected. The higher the voltage detected, the higher the frequency of its beeping sound..
  • ❤️ Auto Shut Off - To save energy and extend battery life, the voltage detector will automatically shut down after about 5 minutes of no operation. The power LED will flash when the battery voltage drops below 2.5V. Please replace the battery p....
Check Stock