Top Adhesive Stabilizer

Cobra Archery Double Joint Stabilizer Quick Disconnect

  • Stabilizer quick disconnect is supper handy for removing stabilizers so they can travel in bow cases, etc..
  • To use Cobra's Double Joint as a disconnect, simply turn the stabilizer 1-1/2 turns, then slide the connector and stabilizer out..
  • As a jacknife knuckle, turn the stabilizer 1-1/2 turns, then swivel the stabilizer 90 degrees and tighten..
  • Connector housing comes with brass connector and bolt..
Check Stock

New brothread No Show Mesh Machine Embroidery Stabilizer Backing 15" x 25 Yd roll - Light Weight 1.8 oz - Cut into Variable Sizes for Machine Embroidery and Hand Sewing

  • ▶NOT ONLY CUTAWAY STABILIZER: This is no show mesh cutaway stabilizer which provides permanent support for embroidery projects. Unlike traditional cutaway stabilizer, our no show mesh stabilizer eliminates the backing showing through light colored fabrics because of its semitransparent, soft and sheer texture. (similar to Sulky Soft'n'Sheer, Weblon, OESD Polymesh).
  • ▶BEST USED ON LIGHT COLORED FABRICS: Our no show mesh stabilizer is semitransparent, it eliminates show-through, so it's best used on stretchy knits in light colored. It eliminates the bulk, stiffness and shadowing characteristic of other types permanent stabilizers. It is perfect for chest logos, pique knits, Polo shirts, T Shirts, infant items, micro fiber apparel, silk and satin..
  • ▶HOW TO USE: It is Light Weight no show mesh stabilizer. For the embroidery designs with light stitches, just put one layer stabilizer under the fabric, then hoop and stitch together. One layer can be strong enough to produce best “no show” results..
  • ▶TIPS FOR DENSER STITCH DESIGNS: For heavy stitches, denser designs or thicker fabrics, you can put one layer of light weig....
Check Stock

New brothread No Show Mesh Machine Embroidery Stabilizer Backing 12" x 50 Yd roll - Light Weight 1.8 oz - Cut into Variable Sizes for Machine Embroidery and Hand Sewing

  • ▶NOT ONLY CUTAWAY STABILIZER: This is no show mesh cutaway stabilizer which provides permanent support for embroidery projects. Unlike traditional cutaway stabilizer, our no show mesh stabilizer eliminates the backing showing through light colored fabrics because of its semitransparent, soft and sheer texture. (similar to Sulky Soft'n'Sheer, Weblon, OESD Polymesh).
  • ▶BEST USED ON LIGHT COLORED FABRICS: Our no show mesh stabilizer is semitransparent, it eliminates show-through, so it's best used on stretchy knits in light colored. It eliminates the bulk, stiffness and shadowing characteristic of other types permanent stabilizers. It is perfect for chest logos, pique knits, Polo shirts, T Shirts, infant items, micro fiber apparel, silk and satin..
  • ▶HOW TO USE: It is Light Weight no show mesh stabilizer. For the embroidery designs with light stitches, just put one layer stabilizer under the fabric, then hoop and stitch together. One layer can be strong enough to produce best “no show” results..
  • ▶TIPS FOR DENSER STITCH DESIGNS: For heavy stitches, denser designs or thicker fabrics, you can put one layer of light weig....
Check Stock

Superpunch Wash-Away Water Soluble Stabilizer for Embroidery - 9 inch x 10 Yard Roll, Fabric Stabilizer, Embroidery Backing & Cut Away Stabilizers - SuperStable Machine & Hand Sewing - Made in USA

  • MADE IN USA WASH AWAY STABILIZER: This USA-origin cut-away embroidery stabilizer dissolves completely when immersed in cold or warm water. Our water-soluble embroidery topping is made in the USA & a great choice for topping. This American-made product is best used on washable fabric and high-pile fabric such as terry cloth, towels, fleece, and other fluffy materials that require the complete removal of the stabilizer..
  • FABRIC STABILIZER SPECS: The thickness of this embroidery paper dissolve is 20 microns & the size is 9 inches wide & 10 yards per roll. (a minimum of 9 inches wide/ you may even receive up to 9.75"). Ideal to leave your stitches on top of your garment. No, itching worries even if you used our wash-away topping stabilizer on your skin touch. It can also be used on top of a high-profile fabric to hold down its nap, or pile. Very popular on towels and polar, sweaters, fleece & other soft knits..
  • EASY TO USE: Hoop the wash-away (water soluble) embroidery stabilizer together with fabric, then stitch. After finishing your project, just spray the embroidery design with water, and the water-soluble stabilizer will disappear leaving nothin....
Check Stock

New brothread Fusible Iron on No Show Mesh Machine Embroidery Stabilizer Backing 12" x 25 Yd roll - Light Weight 1.8 oz - 3 Options - Tear Away/Cut Away/No Show Mesh

  • ▶NOT ONLY CUTAWAY STABILIZER: This is no show mesh cutaway stabilizer which provides permanent support for embroidery projects. Unlike traditional cutaway stabilizer, our no show mesh stabilizer eliminates the backing showing through light colored fabrics because of its semitransparent, soft and sheer texture. (similar to Sulky Soft'n'Sheer, Weblon, OESD Polymesh).
  • ▶BEST USED ON LIGHT COLORED FABRICS: Our no show mesh stabilizer is semitransparent, it eliminates show-through, so it's best used on stretchy knits in light colored. It eliminates the bulk, stiffness and shadowing characteristic of other types permanent stabilizers. It is perfect for chest logos, pique knits, Polo shirts, T Shirts, infant items, micro fiber apparel, silk and satin..
  • ▶HOW TO USE: It is Light Weight no show mesh stabilizer. For the embroidery designs with light stitches, just put one layer stabilizer under the fabric, then hoop and stitch together. One layer can be strong enough to produce best “no show” results..
  • ▶TIPS FOR DENSER STITCH DESIGNS: For heavy stitches, denser designs or thicker fabrics, you can put one layer of light weig....
Check Stock

World Weidner Peel N Stick Self-Adhesive Sticky Embroidery Stabilizer Backing Medium Weight Tear Away 6 Inches by 50 Yards Roll

  • World Weidner Peel n Stick Self-Adhesive Sticky Tear Away Embroidery Stabilizer Backing.
  • Ideal when hooping is an issue. No hooping necessary..
  • White Color, Medium Weight, 1.8oz, 6" by 50 Yards Roll.
Check Stock

Southland Archery Supply SAS Carbon X Hunting Pro Bow Stabilizer for Compound Bows with Dampener and Weights Ultra Lightweight High Modual with Matt Finish - 6in

  • Ultra lightweight High Modual Carbon Stabilizer with a matt finish.
  • The dampener absorbs shock and vibration from the bow keeping it quiet for hunting.
  • Stackable weights are included, 2Oz x 2, archers are able to customize their own stabilizer weight set up to find the right balance of the bow while....
  • Able to mount as the main front stabilizer or rear/side stabilizer.
  • Carbon stabilizer lenght 6", with dampener and weights the overall lenght is 9".
  • Carbon stabilizer lenght 8", with dampener and weights the overall....
Check Stock

Sulythw RV Slide Out Supports Stabilizer Jacks Heavy Duty Rust Resistant Steel Adjustable from 19'' to 47'' for 5th Wheel 5000 lbs Capacity，2 Pcs

  • 【CREATE GREATER STABILITY】: Use the Dumble RV Slide Out Stabilizers for RV Pop Out Supports, 2 Piece Set to help alleviate tension and to increase stability in your travel trailer, RV, and camper slide out rooms.
  • Protects slide out mechanism, provides support to slide outs when extended..
  • 【BUILT TO LAST】: Constructed of heavy duty steel, these RV trailer stabilizer jacks provide maximum strength and durability.
  • Each camper slide out stabilizer is finished with a zinc powder-coating for longevity and resistance to rust and corrosion.
  • Folding handle allows you to store your trailer slide out supports in small compartments with your other RV accessories.
  • 【FITS YOUR TRAVEL TRAILER STABILIZER BARS】: Universal RV stabilizer jacks for travel trailer slide out stabilizer features 5-inch (12.7 cm) circular base and a 5.1 by 3-inch (13 by 7.6 cm) u-channel bracket faceplate for secure positioning of your RV stabilizer bars.
  • The stabilizer jacks fits 19" ~47" Inch RV Slide Out Supports. Package includes (2) camper slide out stabilizers travel trailer leveling jacks to add to your camper accessories..
  • 【EASY TO INSTALL】: From the lowest setting, slide your RV slide out stabilizers travel trailer jacks under your slide out r....
Check Stock

New brothread No Show Mesh Machine Embroidery Stabilizer Backing 10 x12 - 100 Precut Sheets - Light Weight 1.8 oz - Fits 5x7 Hoops

  • ▶NOT ONLY CUTAWAY STABILIZER: This is no show mesh cutaway stabilizer which provides permanent support for embroidery projects. Unlike traditional....
  • ▶BEST USED ON LIGHT COLORED FABRICS: Our no show mesh stabilizer is semitransparent, it eliminates show-through, so it's best used on stretchy knits....
  • ▶HOW TO USE: It is Light Weight no show mesh stabilizer. For the embroidery designs with light stitches, just put one layer stabilizer under the....
  • ▶TIPS FOR DENSER STITCH DESIGNS: For heavy stitches, denser designs or thicker fabrics, you can put one layer of light weight tearaway stabilizer....
  • ▶SAFE MATERIAL: It is made of 100% embossed nylon which is acid free and lead-free, safe and extremely soft to use it on your skin-touch clothes....
Check Stock

Lolona Fashion's Woven Cotton Fabric Fusible Interfacing 2 Yard by 1.5 Yard for Sewing Iron On Lightweight Interlacing Heat and Bond

  • PREMIUM QUALITY FUSE:  One-sided fusible interfacing cotton can be fused with a hot iron with ease. The iron on interfacing will fuse strongly with the fabric, giving it structure, strength, and rigidity. .
  • MULTI PURPOSE: This interlining fabric can be used as a sewing material for handbags, purse, cuffs, collar, pockets, waistbands, blouses, voile, handkerchief linen fabrics, broadcloth, jersey, knits, men and women garments..
  • COMFORTABLE & FRIENDLY: This fusible batting for quilting is made of 100% cotton and very comfortable to the skin. Best for lightweight to medium weight fabrics..
  • MORE FOR LESS:  (60 inch X 2 Yards) light to medium weight White fusible fabric interlining is a great value for the price, considering it is Woven Cotton Interfacing and super friendly iron on adhesive fabric stabilizer for quilting projects..
  • NOTE: Make sure the adhesive coating (sugary side) of the interfacing is facing down when using it on the wrong side of the cloth..
Check Stock

Sulythw RV Slide Out Supports Stabilizer Jacks Heavy Duty Rust Resistant Steel Adjustable from 19'' to 47'' for 5th Wheel 5000 lbs Capacity, 4 Pack

  • 【FITS YOUR TRAVEL TRAILER STABILIZER BARS】: Universal RV stabilizer jacks for travel trailer slide out stabilizer features 5-inch (12.7 cm) circular base and a 5.1 by 3-inch (13 by 7.6 cm) u-channel bracket faceplate for secure positioning of your RV stabilizer bars.
  • The stabilizer jacks fits 19" ~47" Inch RV Slide Out Supports. Package includes (2) camper slide out stabilizers travel trailer leveling jacks to add to your camper accessories..
  • 【DIFFERENT DESIGN】This stabilizer jack utilizes a different design which is equipped with a spring inside . When you need to adjust the height of use, pull out the handle on the side combine with the spring to adjust the height of the stabilizer easily and effectively. If you need product instruction manual, please feel free to contact us..
  • 【CREATE GREATER STABILITY】: Use the Dumble RV Slide Out Stabilizers for RV Pop Out Supports, 4 Pieces Set to help alleviate tension and to increase stability in your travel trailer, RV, and camper slide out rooms.
  • These RV support jacks also help to reduce rocking motions giving you peace of mind when walking back and forth inside your motor home..
  • 【EASY TO INSTALL】: From the lowest setting, slide your RV slide out stabilizers travel trailer jacks under your slid....
Check Stock

CBE Torx Hunting Stabilizer Kit, Black

  • Includes (1) 7. 5” and (1) 11” stabilizer.
  • TORX Stealth Dampener included on each stabilizer.
  • 2 oz of Black Nitride stainless steel weights included on each stabilizer.
  • Able to mount to the front or back of the riser.
  • Adapter included for use on the front of the riser.
Check Stock