Top Air Duct Damper

Dundas Jafine CHK100ZW6 Vents, 4-Inch, White

  • Professional Series, 4" Wide Mouth Cap With 4" Diameter Aluminum Pipe.
  • Snug fit back draft damper helps prevent cold air, snow or rain from entering the home.
  • Damper has been designed for superior noise reduction.
  • Removable pest screen that helps to keep pests out and allows for easy cleaning of the duct.
  • Snap on pipe to cap assembly that eliminates the need for lint trapping staples.
  • UV resistant coating to prevent the cap from discoloring.
Check Stock

Shoemaker Manufacturing, Bronze, 4x10, Premium Floor Register, All Steel Heavy Duty Vent Cover

  • DURABLE: Rolled edge and stabilizing center rib offer extensive durability for years to come.
  • NO TOOLS REQUIRED: Our 4 x 10-inch Bronze-colored floor register fits right into your duct opening, no tools required.
  • QUIET OPERATION & EFFICIENT AIR DISTRIBUTION: Our 4 x 10-inch Bronze Includes a damper mechanism that provides quiet operation day and night.
  • clean lines and thoughtful design ensure air circulation is efficient and consistent.
  • UNSURPASSED CRAFTSMANSHIP: High-gauge steel with close attention to detail displays our dedication to craftsmanship.
  • EASY SIZING FOR A PERFECT FIT: Measure your duct opening to find the perfect floor grille size. Remove your existing register or vent cover and measure the height and width of the opening. The dimension size provided in the specs for this product refers to the size of your duct opening.
Check Stock

Empire Register Co, Vent Cover - 4x10 inch, Honeycomb Design, Brushed Nickel Finish, Heavy Duty Floor Vent Covers, Metal Damper Attached. Vent Covers for Home Floor only.

  • STEEL DAMPER ATTACHED - These vent covers for home floor have sturdy steel construction, powder-coated steel damper attached for durability, longevity, are smooth, shiny, and have no sharp edges. These air vents are crafted for long trouble free operation, rigid extra heavy duty to withstand constant walk on situations.
  • EXCELLENT AIR FLOW - The metal dampers in these air vent covers provide easy unrestricted air flow as compared to the ones with fragile plastic dampers. The metal lever of these heat register covers have sufficient resistance to keep the fins in position allowing you to direct the air flow as required.
  • EASY INSTALLATION - Simply remove the old register vent cover and place the new one in the standard duct opening. To determine size needed, measure air duct opening rather than old register. These vents are not suitable for ceiling or wall applications. No screws or tools are required to install these floor register covers.
  • QUALITY PACKAGING - The air register covers are very carefully first shrink wrapped, then bubble packed, and finally backed with cardboard to prevent any damage during transit.
  • HIGH QUALITY FINISHING - These modern floor vents are crafted from 2mm thick steel, have very high quality lacquer coating to prevent any chippin....
Check Stock

Chess Openings the Easy Way

  • The Listed size 12"x 6" is for inside duct opening measurement, actual outside dimension is 13.75" X 7.75".
  • Stamped Face Steel Construction with 1/2" fin spacing for high air flow.
  • Multi-shutter damper with easy handle to adjust desired amount of air flow.
  • Individually shrink wrapped with card board pad in the back for extra protection.
Check Stock

Two-way plastic side wall/ceiling register in white 10 w X 6 h for duct opening outside dimension is 11.75 w X 8 h

  • The Listed size 10"x 6" is for inside duct opening measurement, actual outside dimension is 11.75" X 8".
  • All plastic construction with 1/2" fin spacing for high air flow with rust proof feature perfect for areas with high moisture.
  • Two way air deflection design with bright white face and black damper in the back.
  • Multi-shutter damper with easy handle to adjust desired amount of air flow.
  • Two screw holes on each side with two screws included.
Check Stock

C-Box HVAC Plenum Ceiling Box 12 x 12 x 8 Round-Connects to Vent Register Diffuser

  • Our C-Boxes are built with a 1/2″ flange all the way around the square portion which can be used for attachment or folded over..
  • We also have a full line of ceiling registers and hvac fittings..
  • The best way to regulate air flow is to install a manual volume damper in the duct run..
  • Connects a 8″ Round Duct to a 12 x 12 Diffuser or Register Vent..
  • Call us with your hole size and duct size so we can help (866) 309-9899.
Check Stock

HBW Two-Way Plastic Side Wall/Ceiling Register in White 10 w X 8 h for Duct Opening Outside Dimension is 11.75 w X 10 h

  • The Listed size 10"x 8" is for inside duct opening measurement, actual outside dimension is 11.75" X 10".
  • All plastic construction with 1/2" fin spacing for high air flow with rust proof feature perfect for areas with high moisture.
  • Two way air deflection design with bright white face and black damper in the back.
  • Multi-shutter damper with easy handle to adjust desired amount of air flow.
  • Two screw holes on each side with two screws included.
Check Stock

Empire Register Co, Vent Cover - 4x10 inch, Antique Style Design, Antique Copper Finish, Heavy Duty Floor Vent Covers, Metal Damper Attached. Vent Covers for Home Floor only.

  • STEEL DAMPER ATTACHED - These vent covers for home floor have sturdy steel construction, powder-coated steel damper attached for durability, longevity, are smooth, shiny, and have no sharp edges. These floor vents 4x10 are crafted for long trouble free operation, rigid extra heavy duty to withstand constant walk on situations.
  • EXCELLENT AIR FLOW - The metal dampers in these vent covers provide easy unrestricted air flow as compared to the ones with fragile plastic dampers. The metal lever of these floor registers have sufficient resistance to keep the fins in position allowing you to direct the air flow as required.
  • EASY INSTALLATION - Simply remove the old register vent cover and place the new one in the standard duct opening. To determine size needed, measure air duct opening rather than old register. These vent register are not suitable for ceiling or wall applications. No screws or tools are required to install these floor register covers.
  • QUALITY PACKAGING - The air register covers are very carefully first shrink wrapped, then bubble packed, and finally backed with cardboard to prevent any damage during transit.
  • HIGH QUALITY FINISHING - These modern floor vents are crafted from 2mm thick steel, have very high quality lacquer coating to prevent any c....
Check Stock

HBW Three-Way Plastic Side Wall/Ceiling Register in White 12 w X 6 h for Duct Opening Outside Dimension is 13.75 w X 8 h

  • The Listed size 12"x 6" is for inside duct opening measurement, actual outside dimension is 13.75" X 8".
  • All plastic construction with 1/2" fin spacing for high air flow with rust proof feature perfect for areas with high moisture.
  • Three way air deflection design with bright white face and black damper in the back.
  • Multi-shutter damper with easy handle to adjust desired amount of air flow.
  • Two screw holes on each side with distance of 9" and two screws are included.
Check Stock

Drop Ceiling HVAC Supply Grille - for T-Bar Lay-in - 2 Coned - 24 x 24 - for 6 Vent Connection - Black

  • Easy Unrestricted Air Flow For Your HVAC System.
  • See our separate listing for Butterfly Damper to Control Airflow.
  • Optional Butterfly Damper Available At Asin: B007CNEL1W.
  • For 6" Round Duct Opening - Spiral or Flex.
  • Q: Why BLACK? A: Black Grilles Always Look Sharp And Never Show DIrt & Dust Marks.
Check Stock

Accord Ventilation ABFRWH410 Floor Register, 4” x 10”, White

  • Durable welded steel construction floor register for AC, heat & HVAC systems.
  • Easy "drop in" floor vent installation - no tools necessary.
  • Opposed blade damper for easy air flow adjustment.
  • Multi-angled rolled fins spread air evenly through your home.
  • Listed product sizes refer to the duct opening measurements, not the floor register itself.
Check Stock

Three-way plastic side wall/ceiling register in white 14"w X 8"h for duct opening (outside dimension is 16"w X 10"h)

  • The Listed size 14″x 8″ is for inside duct opening measurement, actual outside dimension is 15.75″ X 10″.
  • All plastic construction with 1/2″ fin spacing for high air flow with rust proof feature perfect for areas with high moisture.
  • Three way air deflection design with bright white face and black damper in the back.
  • Multi-shutter damper with easy handle to adjust desired amount of air flow.
  • Two screw holes on each side with distance of 14.9″ and two screws are included.
Check Stock