Top Aisi 1045 Carbon Steel
TRUEKATANA One Piece Roronoa Zoro Sandai Kitetsu 1045 Carbon Steel Katana Samurai Swords
- Key features: 1045 carbon steel, dragon tsuba, blue blade, white saya, handmade, full tang, blade polished, sharpened, battle ready, white cord....
- Exclusive process yields stunning blue blade color, hand sharpened, full tang, battle ready sword.
- Following the traditional japanese process, extremely sharp hand honed edge..
- White hardwood saya with high quality piano paint finish. it's incredible beautiful..
Check StockTRUEKATANA Handmade High Manganese Steel Orchid Theme Real Japanese Katana Samurai Sword with Black Scabbard
- Katana, full tang, blue katana, battle ready, blade carving, blue cord handle, alloy tsuba, alloy fittings, piano paint scabbard, sharpened, 1045....
- Unique and striking blue steel blade, full-tang battle ready japanese katana samurai sword..
- Full tang 28.5" carbon steel - expertly hand forged by seasoned sword-smiths using advanced techniques honed over centuries.
- Hand forged blade honed to razors edge, powerful full-tang construction.
- Overall length: 40.5 inches, nagasa length: 27.6 inches, handle length: 10.2 inches, blade sharp: sharpened, blade material: 1045carbon steel, blade....
Check StockTRUEKATANA Black Ninja Theme Handmade Carbon Steel Ninjato Ninja Swords Straight Katana
- Key features: chokuto, 1045 carbon steel, black tsuba, black saya, handmade, full tang, blade polished, sharpened, battle ready, black cord handle,....
- This chokuto samurai sword is a full-tang, battle-ready sword, isn't just a pretty display piece.
- Fully handmade sword, highly polished blade, impressively sized yet easy to wield and deft in battle.
- Hardwood scabbard with high quality piano paint finish, black cord and ray skin wrap.
Check StockAIT Collectibles S2677 Anime ONE Piece Roronoa Zoro SANDAI KITETSU Sword Irregular HAMON Blade 41.1
- Overall length: 40.5 inches, nagasa length: 28.3 inches, handle length: 10.2 inches, blade sharp: sharpened, blade material: 1045 carbon steel, blade....
- Key features: real samurai sword, 1045 carbon steel, handmade, full tang, sharpened, battle ready, alloy fittings.
- This katana samurai sword is a full-tang, battle-ready sword, isn't just a pretty display piece.
- Hardwood scabbard with high quality piano paint finish, black cord and ray skin wrap.
- Sword and scabbard only. not include stand.
Check StockOrion Motor Tech OMT Blind Hole Collet Bearing Race and Seal Puller Extractor Kit Slide Hammer Pilot Insert Inner Bearing Removal Tool Set 16 Pieces
- 16-PIECE SET: This blind bearing puller set by Orion Motor Tech includes a slide hammer, counterstay puller, spare pin bolt, 3 screw adapters, and 10 split collets to get all your work done on parts from 1/4 to 2-1/3 inch diameter (6-59 mm).
- HEAVY-DUTY CONSTRUCTION: These wheel bearing removal tools are made from AISI 1045 medium carbon steel forged and galvanized for long-term durability under even punishing use.
- the collets in particular are chromoly steel to handle even the most stubborn blind bearings and bushings without trouble.
- WIDE APPLICATION: This internal bearing puller set's expandable collets and threaded screw adapters remove tight and jammed axles, bearings, and bushings on a wide variety of vehicles without damaging the removed parts.
- EASY TO USE: For most parts, just fit the appropriate collet, lock it into the inner race, and pull the slide hammer's weight back to easily knock out the bearing or bushing.
- for tighter or more delicate operation, the counterstay can be slowly tightened to more carefully extract the part.
- BLOW-MOLDED CASE: The custom blow-molded case keeps everything organized and easy to carry or store as needed.
Check StockOrion Motor Tech OMT Blind Hole Collet Bearing Race and Seal Puller Extractor Kit Slide Hammer Pilot Insert Inner Internal Bearing Removal Tool Set 16PCS
- 1.16-PIECE SET: This blind bearing puller set by Orion Motor Tech includes a slide hammer, counterstay puller, spare pin bolt, 3 screw adapters, and 10 split collets to get all your work done on parts from 1/4 to 2-1/3 inch diameter (6-59 mm).
- 2.HEAVY-DUTY CONSTRUCTION: These wheel bearing removal tools are made from AISI 1045 medium carbon steel forged and galvanized for long-term durability under even punishing use.
- the collets in particular are chromoly steel to handle even the most stubborn blind bearings and bushings without trouble.
- 3.WIDE APPLICATION: This internal bearing puller set's expandable collets and threaded screw adapters remove tight and jammed axles, bearings, and bushings on a wide variety of vehicles without damaging the removed parts.
- 4.EASY TO USE: For most parts, just fit the appropriate collet, lock it into the inner race, and pull the slide hammer's weight back to easily knock out the bearing or bushing.
- for tighter or more delicate operation, the counterstay can be slowly tightened to more carefully extract the part.
- 5.BLOW-MOLDED CASE: The custom blow-molded case keeps everything organized and easy to carry or store as needed.
Check StockOMT Master Ball Joint Press Kit, Ball Joint Removal Tool Kit for Ball Joint U Joint and Brake Anchor Pin Removal, 21pc Ball Joint Tool Set with Ball Joint Press and Universal Adapters
- VERSATILE TOOL SET: Orion Motor Tech’s ball joint press kit lets you quickly and easily remove and install stubborn press fit parts, including ball joints, U joints, and brake anchor pins.
- UNIVERSAL COMPATIBILITY: This ball joint tool kit includes 3 receiving tubes and 9 adapters to work with most 2 & 4-wheel drive cars, pickups, vans, and SUVs and is compatible with GM, Ford, Jeep, and Dodge since 1997.
- DURABLE CONSTRUCTION: Our ball joint removal tool is made from premium AISI 1045 medium carbon steel that has been forged and coated to provide optimal corrosion resistance and durability for powerful leverage.
- SAFE & SECURE: The 9 inch long C frame press with a 6 inch opening and extra long jackscrew provides even and straight force to let you smoothly press out joints without damaging other components.
- EASY TO USE: This 21 piece ball joint tool set removes and installs press fit upper and lower joints without removing the control arms.
- a custom molded case comes included for easy transport and storage between uses.
Check StockOrion Motor Tech Power Steering Pump Pulley Puller Installer Tool Set, Pump Pulley Remover Installer Tools Compatible with Ford, GM, and Chrysler
- ...ludes a pulley remover, a pulley installer, 2 forcing screws, 1 sleeve, 2 puller jaws, and a disconnect tool.
- the reversible puller jaw design also lets you check and repair pulley flanges with greater ease.
- DURABLE PERFORMANCE: Each of these power steering tools is constructed from structural-grade AISI 1045 medium carbon steel for the necessary strength to get your work done right.
- each piece is also heat treated and blackened for even greater dependability and superior corrosion resistance to give you years of use.
- WIDE COMPATIBILITY: This pulley pump removal kit is compatible with the Saginaw, Thompson, and Ford C111 C2 power steering pumps in most Ford, GM, and Chrysler vehicles and the belt-driven vacuum pumps and press-on water pump pulleys in GM’s V6 engines.
- the two forcing screws also work with most VW vehicles’ power steering systems.
- USER FRIENDLY: This power steering pump pulley installer and remover set is intuitive but also comes with clear instructions for easy step by step operation.
- the custom blow-molded case keeps everything well organized and easy to store or carry between jobs.
Check StockOrion Motor Tech Power Steering Pump Pulley Puller/Installer Tool Set, Pump Pulley Remover Installer Tools Compatible with Ford, GM, and Chrysler Vehicles
- ...ludes a pulley remover, a pulley installer, 2 forcing screws, 1 sleeve, 2 puller jaws, and a disconnect tool.
- the reversible puller jaw design also lets you check and repair pulley flanges with greater ease.
- DURABLE PERFORMANCE: Each of these power steering tools is constructed from structural-grade AISI 1045 medium carbon steel for the necessary strength to get your work done right.
- each piece is also heat treated and blackened for even greater dependability and superior corrosion resistance to give you years of use.
- WIDE COMPATIBILITY: This pulley pump removal kit is compatible with the Saginaw, Thompson, and Ford C111 C2 power steering pumps in most Ford, GM, and Chrysler vehicles and the belt-driven vacuum pumps and press-on water pump pulleys in GM’s V6 engines.
- the two forcing screws also work with most VW vehicles’ power steering systems.
- USER FRIENDLY: This power steering pump pulley installer and remover set is intuitive but also comes with clear instructions for easy step by step operation.
- the custom blow-molded case keeps everything well organized and easy to store or carry between jobs.
Check StockOrion Motor Tech OMT Ball Joint Press Kit, Ball Joint Removal Tool Kit for Ball Joint U Joint and Brake Anchor Pin Removal, 10pc Ball Joint Tool Set with Ball Joint Press and Universal Adapters
- VERSATILE TOOL SET: Orion Motor Tech’s ball joint press kit lets you quickly and easily remove and install stubborn press fit parts, including ball joints, U joints, and brake anchor pins.
- UNIVERSAL COMPATIBILITY: This ball joint tool kit includes adapters of common sizes to work with most 0.5 & 0.75 ton 4WD vehicles and is compatible with GM, Ford Jeep, Dodge, IHC since 1967.
- DURABLE CONSTRUCTION: Our ball joint removal tool is made from premium AISI 1045 medium carbon steel that has been forged and coated to provide optimal corrosion resistance and durability for powerful leverage.
- SAFE & SECURE: The 9 inch long C frame press with a 6 inch opening and extra long jackscrew provides even and straight force to let you smoothly press out joints without damaging other components.
- EASY TO USE: This 10 piece ball joint tool set removes and installs press fit upper and lower joints without removing the control arms.
- a custom molded case comes included for easy transport and storage between uses.
Check StockKnives Ranch Handmade Damascus Steel Full Tang Cowboy Style Long Handle Knife with Cattle Bone Handle and Heavy-duty Horizontal Carrying Crossdraw Sheath Snug Fit (2011-B)
- Total length: 7", Blade Length: 3", Blade Thickness: 1/8".
- Blade Steel: Knives Ranch’s exclusive Carbon Steel Damascus hammer forged in 240 layers from AISI 5160 spring steel and AISI 4340 chromium molybdenum alloy steel.
- Handle: Cattle Bone with Brown Micarta Fiber Liner.
- Sheath: Heavy Duty Cowhide HORIZONTAL Carrying Crossdraw Sheath.
Check StockOMT Torsion Bar Unloading Tool, Heavy Duty Torsion Key Tool with C Frame and 0.9" Dia Threaded Rod, Torsion Bar Tool Compatible with Chevy Silverado GMC Dodge Cadillac More
- ...a 6.3 inch (16 cm) opening that easily holds the torsion bar in place and a 7.1 inch long, 0.9 inch (22 mm) diameter threaded shaft that makes quick and easy work of your suspension jobs.
- DURABLE CONSTRUCTION: This car tool is constructed from high quality AISI 1045 medium carbon steel.
- the hammered finish offers incredible durability and corrosion proof experience to let you enjoy years of dependable use.
- and the 1 inch hex drive bolt offers compatibility with your standard hand wrench.
- 1 YEAR WARRANTY: Order Orion Motor Tech's torsion bar unloading tool with your peace of mind assured thanks to its strong 1 year warranty and our usual friendly 24/7 customer service.
- order today at no risk to enjoy hassle-free car servicing.
Check Stock