Top Alloy Machining Parts

Zouzmin Carbide Insert APGT1135PDFR-G2 Milling Insert for Aluminum Alloy (APGT1135PDFR-G2)

  • Machining: Copper And Aluminum Medium Finish Machining.
  • Allows Faster Machining And Leaves Better Finished on Metal Parts, Reduce the Downtime Required to Change Edges and Easily to be Replaced..
Check Stock

DKKY Auminum Alloy Steering Knuckle C-hub Rear Axle Mount Sets for Traxxas 1/18 LaTrax Teton Desert Prerunner Replace #7532 7552 (Blue)

  • 1.Using high-quality aluminum alloy CNC machining, strong and durable..
  • 2.Upgrading the vulnerable plastic parts #7532 7552 of the original car to allow the car to obtain better performance..
  • 3.Installed in the fixing holes of the original car, simple and non-destructive installation..
  • 4. Suitable for Traxxas 1/18 LaTrax Teton,Desert Prerunner..
Check Stock

Morjava PH-720A Panoramic Ball Head Kit 720 Degree for All DSLR Camera

  • Aluminum alloy material, CNC precision machining, surface anode anti-oxidation treatment..
  • Panoramic bracket consists of three parts- two quick release plate with graduated disc and a fixed plate.the quick release system could be adjustable for 360° vertically by loosen the upper pivot bearing lock knob. And the bottom base can rotate 360° horizontally.adjust the camera position is more convenient..
  • The ball head with 4 angles of rotation: 15°, 30°, 45° and 60°, in the horizontal or vertical shooting to 360 degree panoramic shooting..
  • Dovetail groove at the bottom, can quickly with ball head or clamp for shooting..
  • PH-720A Panoramic Ball Head With Suitcase，more convenient to carry..
Check Stock

GBJ 50PCS APMT 160408PDER YBG205 Carbide milling Inserts Cutting Tools Processing for Steel,Stainless Steel for BAP400R BAP300R Milling Holder

  • ☞ YBG205 is the best choice for finishing on stainless iron parts, can make high-gloss surface. YBG202 has good wear resistance and toughness, suitable for finishing, semi-finishing, high-temperature alloy processing on steel ,stainless steel and carbon steel parts..
  • ☞ Coating: Thick AL2O3 coating extends the life of the inserts working in high temperature. The first choice for steel processing from finishing to rough machining..
  • ☞ Advantage: It has strong resistance to plastic deformation and edge strength.High-hardness processing, stable performance, sturdiness and durability.
  • ☞ Feature: Precision processing, suitable for processing low carbon steel, stainless steel, viscous materials and non-ferrous metals..
  • ☞Package includes: 50PCS APMT160408PDER YBG205 Carbide Milling inserts.
Check Stock

VMTW 8X1 CBN Grinding Wheel 180 Grit 1/4 inch side face for High Speed Steel

  • Straight diamond grinding wheel used for machining of conical, cylindrical and flat surface, cylindrical and conical apertures. Machining of cylindrical surfaces parts and surface ends at one set-up. Machining of recesses and slots of carbide stamps. Sharpening and finishing of carbide tools..
Check Stock

3PCS BAP300R C10-10-120-1T/C12-12-130-1T/C12-13-130-1T 1Flute Indexable End Milling Holder+ 6PCS APMT1135PDER CNC Inserts+3PCS T8 Wrench (3PCS 300R End Milling Holder)

  • * Package includes ：1PCS 300R C10-10-120-1T +1PCS 300R C12-12-130-1T+1PCS 300R C12-13-130-1T+ 6PCS APMT1135PDER + 3PCS T8 wrench. If you need more APMT1135PDER, please search ASIN：B097RG372M..
  • * High performance replaceable inserts, anti-seismic high-quality alloy steel, can effectively suppress vibration..
  • * It is suitable for rough machining, finish machining, digging machining, groove machining and cutting machining..
  • * The screw offset fastening design makes the inserts and groove closely combined, enhances the rigidity, and the processing effect will be better..
  • * The handle strictly abides by the process of first vacuum quenching and then tapping to avoid the deformation caused by first tapping and then quenching. It is firm and durable and can prolong the service life..
Check Stock

Genmitsu 4pcs 2-Flute Tapered Ball Nose End Mills Tungsten Carbide Cutter with Nano Blue Coat R0.25-1.0 1/8” Shank TB04A

  • High Quality: The Genmitsu end mills are made of ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality..
  • Cost-Effective: Coming with 4x 2-Flute tapered ball nose end mills, Shank Diameter: 3.175mm, Radius: 0.25, 0.5, 0.75, 1.0mm, Cutting Length: 15mm, Overall Length: 40mm..
  • Versatile: Perfect for 3D machining jobs like molds, rapid prototyping, models and other other precision parts processing, these Tapered ball nose bits can do the best..
  • Applicable Materials: These nano blue coating bits have an HRC rating of 65 and are optimal for milling a wide range of materials, including plastics, aluminum, circuit board, wood, etc. To learn more about how to choose the right bits to meet your needs, please find the Comparison Chart (CNC Bits Buying Guide) at the Product Guides and Documents Section below..
  • Wide Compatibility: Genmitsu TB04A tapered ball nose end mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure ....
Check Stock

Weltool Flashlight Strike Bezel - 304 Stainless Steel for Maglite C or D cell flashlights LED ML300L & ML300 LX - Upgrade Maglite Glass Breaker

  • Upgrade Stainless Steel Strike Bezel fits Maglite C or D cell flashlights, such as Maglite 2-6 C/D cells led, incandescent, ML300 series. Accurate machining, perfectly fit. ATTENTION: Not Fit ML150, ML125,ML100, ML50, ML25 and Mag Charger series!.
  • Made from an entire steel column with CNC accurate machining, 1.13 times of hardness then 7075 aluminum alloy. It’s much more durable and tougher than aluminum alloy with more impact resistance & corrosion resistance..
  • 6 attack teeth design, fits for self-defense or use to shatter the glass in an emergency..
  • Sandblasting surface, more wear proof than aluminum alloy’s anodizing and it’s adaptive for flashlight bodies with different colors..
  • Package includes: 1 * LB03 Stainless Steel Strike Bezel 1 * Replacement Lens 1 * O-ring 1 * Protection Case for Lens.
Check Stock

Hss Center Drill, High Hardness Angle 60 ° Center Drill, for Industry Drill

  • Each center drill has a double end and with standard milling Angle 60 °.
  • Used for parts that need to be machined between production centers or work piece center holding.
  • Prefabricated precise positioning for hole processing, guide the drill for hole machining, so reducing error, center hole machining for the end surface of the shaft and other parts.
  • The center is used to make tapered holes for the center of the lathe in order to keep the standard twist drill in place so as to prevent the screw from slipping or deviating.
  • These center drill set are made of high speed steel, high hardness and durable in use.
Check Stock

Vbestlife Single Speed Chain Tensioner, Aluminum Alloy Folding Bike Chain Stabilizer Bike Chain Tensioner for Single Speed Folding Bike(Black)

  • [Aluminum Alloy Material]- Bicycle tensioner is made of high quality aluminum alloy material, which is hard, stable, durable and can be used for a long time..
  • [Bearing Shaft]- The Bike chain tensioner uses a bearing shaft, which can be matched with a variety of guide wheels. The guide wheels generally use 11 teeth, and can also use 13 teeth..
  • [CNC Machining]- Exquisite workmanship, full CNC accurate machining, anode color, laser engraving sign, suitable for single speed folding bicycles..
  • [Prevent Falling Off]- Folding bicycle chain stabilizer can effectively prevent the chain from falling off due to instability during riding..
  • [Easy to Install]- Exquisite workmanship, stylish and generous appearance, stable workmanship, easy to install and disassemble, simple operation..
Check Stock

FVIEXE 4PCS Acetal Copolymer Round Rod, Acetal Rod Opaque Black, 1 Inch Diameter and 12 Inch Length, Standard Tolerance, Acetal Rod Perfect for Non-Marring Fixtures

  • Size: 0.98inch/2.5cm diameter x 11.81inch/30cm long..
  • Highly Machinable: High-quality acetal copolymer rod, an engineering thermoplastic polymer with good strength and stiffness, which is easily processed using machine and yields products of even sizes. Resistant to high temperatures make it won't become gummy during the machining process..
  • Chemical-Resistant: Among different types of acetals, acetal copolymer is highly resistant to various chemicals (highly alkaline-resistant),heat,and water and it doesn't easily deteriorate or wear in wet environments..
  • Wide Application: 1 inch acetal rod can act as lubricated parts, decorated parts, precision instruments, bearings gears, pumps, and insulated shells replacing of bronze, copper alloy, zinc, aluminum, steel and other metals..
  • What You Get: You will receive 4 pieces opaque black acetal copolymer round rod, sufficient quantity to meet your different needs..
Check Stock

Carbide Rough Milling Insert Carbide Inserts for Steel, Stainless Iron and Cast Iron PVD (AlTiN) Coating Carbide Milling Insert/Carbide Inserts APMT1604PDER-H2 APKT1604 for BAP400R Milling Holder

  • Machining: Copper And Aluminum Medium Finish Machining.
  • Allows Faster Machining And Leaves Better Finished on Metal Parts, Reduce the Downtime Required to Change Edges and Easily to be Replaced..
Check Stock