Top Alternating Current Motor

Compatible with Glock 43 Glock 43x, OWB Holster Fit G43 G43x, 360 Degrees Adjustable Belt Clip, Fit 1.5'' 1.75'' 2.0'' 2.25'' Wide Belt, Level II Retention Index Finger Release

CONVERSION: High quality bridge rectifiers used for conversion of an alternating current input into a direct current output.
GOOD TEMPERATURE: Well welded structure with good temperature and power cycle ability ensures a more stable performance.
SINGLE PHASE RECTIFICATION: Designed for single phase rectification, output DC current is 200A.
GOOD HEAT DISSIPATION: It has a large over-current capacity, good heat dissipation.
MULTIPLE USAGE: This high power bridge rectifier can be widely used for power supply.

10-pcs premium TIG welding Tungsten electrodes pure (Tungsten >99.5%). Electrode diameter available: 0.040" (0.5mm), 1/16" (1.6mm), 3/32" (2.4mm), 1/8" (3.2mm) and 5/32" (4.0mm).
AWS Classification: EW-P (Green). Conform to ANSI/AWS Standard A5.12M/A5.12:2009 ISO 6848:2004 MOD. Ground annealed..
Better stability when used with alternating current. Lower current-carrying capacity and tends to spit at higher current. May balls easily. Low cost. Usually used for non-critical welds only..
10-pcs/box Tungsten electrodes (Pure EW-P). With quantity discount. Buy More Save More!.
U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..

Three control way: manual control, Remote control(need a 23A 12V battery, not included in package).
Using single alternating current as power source.
Current overload protection function to prevent optional overload.
High strength aviation level zincification steel wire rope for safety and abrasion resistant.
Hooks for both side, which is easy installation and a safe and reliable application.

Motor Driver: 9V-42V DC power supply, H bridge bipolar constant phase flow drive. The maximum 4.0A of the eight kinds of output current..
Motor Driver: Energy-saving semi-automatic current lock function, built-in temperature protection and over current protection.The largest 32 subdivision of the 6 models are optional..
Package: TB6600 stepper motor driver + nema 17 stepper motor + mounting bracket + inner hexagon spanner + M3/M4 screws.
Strive for 100% service satisfactory, any question or problem please do not hesitate to contact us, we are always happy to help..

Max open voltage: 37V, Weld able wires: 0.023'' to 0.035'' steel and stainless steel.
Duty Cycle:10% at 105AMP / 35% at 60 AMP.
Package including： 1X welder machine, 1X welding gun, 1X Welding Wire, 1X weld mask, 1X brush 2.5M.
Torch With Full On / Off Safety Control, Automatic Thermal Safety Protection..

AC/DC TIG Welding(pulse)--alternating current (AC) and direct current (DC). Welding of almost all metals, such as steel, stainless steel, aluminum,....
2T/4T (TIG)--determines the control of the operating mode and offers extended control over the current flow. In 2T mode, the high-frequency ignition....
TIG Aluminum Welder--10-200AMP AC/DC TIG Electric Current Output.
Quality TIG welding on Aluminum, Cast Iron, low hydrogen , Stainless or Steel and....
Equipped with a footswitch, welding is more convenient, anytime, anywhere, free welding!（30A breaker suggested for 220V, 50A breaker suggested for....
3 year’s warranty provided,please contact us for any assistance.We will take each and every action to prevent you from bearing any loss at Amazon as....

EASY AND SAFE CONTROL SWITCH - Forward and reverse switch with automatic spindle lock for safe use, meeting your different needs for screwing tasks. Push the forward & reverse switch at the middle position of handle, it will lock the screwdriver for safety..
Voltage: 120.0 volts_of_alternating_current.

【Multifunction】This is a cold welding/aluminum welding machine with a voltage of 110V/220V. The current is 200 AMP. There are 4 modes at the same....
【Cold welding】It can reduce deformation and discoloration. In cold welding mode, the color of aluminum and stainless steel welds is silver-white.....
【Amazing effect】Multi-mode selection, more intuitive control. ANDELI TIG-250PL can weld 0.04 inch seamless aluminum plate by cold spot welding,....
【AC/DC welding】Alternating current (AC) and direct current (DC). Can weld metals, such as iron, stainless steel, aluminum, copper, etc. Equipped....
【Package delivery】Argon arc welding and aluminum sleeve: TIG-250PL ACDC 110V / 220V, with American standard plug, grounding clamp 2m, aluminum....