Top Amp Crimp Tool

SharkBite PEX Crimp Ring Removal Tool, 1/2, 3/4 and 1 Inch Copper Crimp Rings, Orange Handles, Plumbing Fittings, 23055

  • SHARKBITE CRIMP RING REMOVAL TOOL: This SharkBite plumbing tool removes copper crimp rings from brass or poly crimp connections for fittings to be reused.
  • has 200 lbs of crimping force and features a 6 inch handle.
  • COMPATIBILITY: This plumbing disconnect tool works with 1/2 inch, 3/4 inch, and 1 inch copper crimp rings.
  • EASY TO USE: This intuitive SharkBite crimp ring removal tool allows for quick and easy installation, with no tools, crimping, glue, or soldering required.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use.
  • suitable for commercial repairs or home improvement projects.
  • MADE IN THE USA: All SharkBite valves, clips, joints, and adapters are manufactured and tested in the USA.
Check Stock

Dorman 614-030 Uni-Fit C.V. Joint Boot Air Powered Installation Tool Universal Fit

  • ...ant, oil-resistant, high-temperature resistant, and has a long service life. The clamp head undergoes a quenching process for higher hardness. Equipped with an ergonomically designed non-slip insulated handle, it is practical and comfortable..
  • 【Simple & Easy To Use】Crimp the clamp and then push down on the crimp to lock into place. It's a good partner of a 1/2" extension handle or torque wrench..
  • 【Package Includes】10X Small Clamps, 10X Big Clamps & 1X Pliers Tool. The clamp and tool set can be used directly, which is convenient and worry-free..
Check Stock

IWISS Deutsch Crimping Tool for Solid Contacts Size 12 16 20 Deutsch DT DTM DTP Connectors Amphenol AT Pins

  • Deutsch Crimping Tool: IWISS HD-2612 is a premium crimping tool for Deutsch solid contacts. Must have tool for making automotive electrical OEM wire....
  • Crimp Range: A high quality Deutch crimp tool creates a precise crimp for 26 to 12 AWG solid pin Deutsch terminals. For use with Size 20, Size 16,....
  • Four Indent Crimping: Built in die sets create a four-indent, 8-impression crimp providing the most uniform displacement of wire and contact material..
  • Applications: Ideal for repair and maintenance work of automotive electrical wiring in Truck, Bus, Off-highway, Construction, Agriculture, Mining,....
  • Tool Gauge: Periodic gaging is recommended to insure accurate calibration. Easy design provides quick results. Tests for a standardized and accurate....
Check Stock

AMZCNC Copper Tube Fittings Crimping Tool Copper Pipe Crimper Press with 1/2,3/4 and 1 inch Jaw for ProPress Copper Fitting-Manufactured Plumbing, Pipe Press Copper Crimp Tool

  • Built-in Dual Jaw: IWS-1234PS copper ring crimp tool with built-in 1/2”&3/4'' well-polished jaw, Go/No-Go gauge,and instruction manual on how to make a crimp connection, check connections with Go-No-Go gauge and calibrate the tool.
  • Purpose: IWS-1234PS F1807 PEX crimp tool is designed to compress copper crimp rings to secure PEX or PE-RT tubing to brass or poly crimp fittings.
  • Capacity: Works with 2 major sizes of PEX tubing - 1/2" and 3/4" Factory calibrated and meets ASTM F-1807 standard.
  • Compatibility: Copper crimp rings (Sioux Chief, Watts, Nibco and other brands). Brass or Poly crimp style PEX fittings. All types and brands of PEX tubing - Everhot, Viega, Nibco, Watts, etc.
  • Smooth actuation mechanism allows secure connections with minimal force required. Hardened steel construction ensures reliability and durability.
Check Stock

IDEAL Industries, Inc. 30-495 FT-45 Feed-Thru Modular Plug Crimp Tool for CAT5e, CAT6, CAT6A RJ-45 Connectors, 5 1/2', 1 Crimper

  • MODULAR PLUG CRIMP TOOL: FT-45 is a simple, compact and highly effective modular plug crimp tool for installers and techs to terminate RJ-45 connectors on to CAT5e, CAT6 or CAT6A twisted pair cable..
  • COMPATIBILITY: This tool works with both IDEAL Feed-Thru Modular plugs and standard modular plugs. Feed-Thru plugs allow the individual conductors to "feed-thru" the end-face of the connector and to verify the wires prior to crimping connector..
  • PRECISE TERMINATION: During crimping, the FT-45 crimp tool cleanly shears the excess conductors and leaves a smooth finish at the end face of the Feed-Thru connector. This minimizes accidental shorting of conductors or inadvertent contact in plug jacks..
  • VERSATILITY: FT-45 is designed to crimp IDEAL Feed-Thru, standard and shielded RJ-45 connectors for CAT5e, CAT6 and CAT6A cables. It is compatible with many non-IDEAL connectors as well. One tool covers current and future twisted pair applications..
  • SPECIFICATIONS: This patented tool requires only 1/3 to 1/2 the hand force as compared to traditional tools to crimp the connector. The crimping tool is 5 ½ in long and weighs approx. 1/2lb. It easily fits in your pocket and lightens the tool bag load..
Check Stock

Swpeet 14Pcs Professional Crimping Tool Kit, Ratcheting Wire Terminal Crimper Tool Kit with 1Pcs Cable Stripper and 10pcs 50 Ohm BNC Crimp Male / Straight Connectors for Coax Connectors

  • ☎ Crimping Tool: This tool is High quality professional crimping pliers tool, Heavy duty ratchet crimp tool, Die with .0255, Removable die, Quality handle for better control, Brand new heavy duty ratchet crimping tool for coax connectors with cable size RG-58, 59, 141, 142, LMR195, LMR240, 8/x..
  • ☎ Cable Stripper: Double blades, coax cable stripper, Fully adjustable and replaceable blades, Removes 4, 6, 8 and 12mm Insulation (Adjustable), Use easily, lock the tool over the cable, spin clockwise, then pull off the unwanted portion..
  • ☎ Crimp Male Connector: Brass (Not Alloy) material ensure higher signal transmission and connectivity, Adapter with nickel plated for durability and repeated disconnects Cable mount BNC male connector perfect Works with coaxial cable such as RG58, RG142, LMR195. Impedance:50 Ohm..
  • ☎ Crimp Straight Connector: Product Series: PL-259 cable mount RF connector Connector material is Brass (Not Alloy) ensure higher signal transmission and connectivity, Body Plating is Nickel. Contact Termination:Solder, Impedance:50 Ohm, Frequency Range:DC 0-2.5GHz..
  • ☎ Great Value: In this kit, You will not only get Professional Crimping Tool, But also you will get 1Pcs Wire Stripper and 5Pcs Crimp Male Connectors and 5Pcs Crimp Straight Con....
Check Stock

Solsop Cable Tester RJ45 Crimp Tool kit CAT5 Cat5e Crimping Tool Crimper with 100PCS RJ45 CAT5 CAT5e Connectors, Mini Wire Stripper

  • Fast, reliable crimp tool with steel body for durability with ergonomic comfort grips.
  • Precision Crimping dies was made of high-carbon steel for Any Ethernet or Telephone Cable.
  • All in one 8P/RJ-45, 6P/RJ-12 RJ-11 Crimp/Cut/Strip Tool for your variety of network needs.
  • Professional tool Crimps RJ45, RJ11, RJ12 and RJ22 modular connectors, and Cuts, strips and crimps Twisted Pair, Ethernet, RJ45 voice and data cables.
  • Cable Tester & Replaceable Blade - Network Cable Tester for cables with RJ45/RJ11/RJ12 Connector (9V battery not included), Maintains razor sharpness, textured handle grips reduce hand fatigue and prevent slipping during cutting, stripping and crimping.
Check Stock

Morris 10817 Terminal Kit with Controlled Cycle Crimp Tool, 200-Piece

  • 200 Piece Terminal Kit with Controlled Cycle Crimp Tool - This Multi Piece Terminal Assortment has all the connectors, terminals and the Crimp Tool you'll need..
  • 22-10 Awg Ergonomic Controlled Cycle Crimp Tool.
  • Multi piece terminal assortment contains ring and spade terminals, butt connectors & male and female disconnects.
  • Terminals and Disconnects are cULus Listed.
Check Stock

IWISS Pex Crimping Tool 1/2-inch & 3/4-inch Copper Ring Heavy Duty Dual Size c/w Go/No-Go Gauge Meets ASTM F1807

  • Capability: IWS-1234P PEX Crimp Tool Kit works with 2 sizes of PEX tubing-1/2-inch and....
  • Compatibility:Copper crimp rings made to ASTM F1807 standard (Sioux Chief, Watts, Nibco and other brands).Brass or Poly(PPSU) crimp s....
  • Users Manual Included: Contains information on how to make a crimp connection, check connections with Go-No-Go gauge and calibrate t....
  • Calibration & Inspection: Tool calibrations are made easy with adjustable lock screws. The Crimp/Clamp Tools must be checked for cor....
  • Innovation: Tool includes a gadget helps to reshape the deformed 3/4” rings and cinch rings a little bit smaller to avoid rings from slipping off....
Check Stock

IWISS Deutsch Connector Crimping Tool Kit for Deutsch DT Connectors, Solid & Stamped Contacts, Delphi Weather Pack Crimper,Deutsch Pin Removal Tool Kit-12PCS

  • Automotive Harness Wiring Tool Kit: Ideal for pin & depin automotive electrical connectors like Weather Pack connectors, Deutsch Connectors, Molex connectors which are commonly found on cars, RVs, trucks, motorcycles, race cars and boats..
  • Deutsch Crimping Tools: IWD-16, IWD-12 & IWD-20 crimpers are designed for crimping Deutsch solid pins and sockets(Size 16, Size 12 & Size 20) to fit in Deutsch DT, DTP, DTM, HD10, Jiffy Splice connectors..
  • Weather Pack Crimping Tool: Delphi WeatherPack Crimper: IWC-1424B Metri-Pack and Weather Pack crimp tool aids in the assembly process of the Metri-Pack 150 & 280 and Weather Pack connector lines. The crimpers are designed to crimp the terminals and seals found in the Metri-Pack and Weather Pack series..
  • Open Barrel Terminal Crimper： IWC-1424A open barrel crimp tool is designed to crimp non-insulated, open barrel terminals, also known as OEM terminals. It has five crimp stations that roll the open barrel terminal tabs over the wire and insulation, crimping them to the terminal..
  • Pin Removal Tools: ET-01( DT-RT1) Deutsch wedgelock removal tool and depin tools for WeatherPack terminals, Deutsch DT, DTM, DTP connectors release terminals safely without damaging the vehicle wiring harness or terminal block..
Check Stock

Solsop Cable Tester RJ45 Crimp Tool kit Crimp Crimper CAT5e CAT5 Crimping Tool with 100PCS RJ45 CAT5 CAT5e Connectors Plug Network Tool kits

  • Professional Rj45 Crimping Tool with 100PCS RJ45 CAT5 CAT5e Connectors crimps, strips and cuts cable for 8 and 6 position modular plugs (Network Wire Stripper - Free).
  • Fast, reliable crimp tool with steel body for durability with ergonomic comfort grips.
  • Precision Crimping dies was made of high-carbon steel for Any Ethernet or Telephone Cable.
  • All in one 8P/RJ-45, 6P/RJ-12 RJ-11 Crimp/Cut/Strip Tool for your variety of network needs.
  • Network Cable Tester & Replaceable Blade - Network Cable Tester for cables with RJ45/RJ11/RJ12 Connector (9V battery not included).
  • Replaceable Blade allow you to adjust and change blades freely and maintains razor sharpness.
Check Stock

HKS Spark Plug Connector Crimping Tool For Ignition Cable and Spark Plug Wire – Ratcheting Wire Crimpers – Max Diameter 8.5mm – Ratchet Terminal Crimper – Electrical Crimping Tool

  • Professional Crimper – This crimper features an efficient ratchet mechanism and finish-machined crimp die for a solid crimp. This crimping tool fits perfectly with spark plug terminals with a diameter of 8-8.5mm..
  • Precise Mechanics – The crimping process is accomplished by pressing the handle through a complete ratcheting cycle until the handle is automatically released. Due to the ratchet, you are able to secure the connector first and then insert the wire into the crimp..
  • Adjustable Crimp Force – The tool has a knob that adjusts the crimp strength to ensure the right crimp force for your project. Equipped with a quick release lever allows the crimper jaw to be opened in any position..
  • Ergonomic Handles – Ergonomic, cushioned, non-slip handles are designed to ensure a strong grip in all situations..
  • Crimp & Strip 2 in 1 – Suitable for single & dual spark plug crimp terminals.The crimper fits for the spark plug wire diameter of 8.5mm..
Check Stock