Top Ansi Flexible Gate Valve

DuraChoice 2\ Brass Gate Valve - 200WOG, FxF NPT

  • Made of high quality brass material, this gate valve is sturdy and durable..
  • The internal fluid path of valve body is straight through which allows fluid to flow in a straight line and the flow resistance is small..
  • It's easier to open and close, because the movement direction of the gate is perpendicular to the flow direction, whether on or off..
  • It is suitable for water, oil, gas, steam, etc..
  • Widely used in mechanical equipment, chemical equipment, industrial equipment, water supply and drainage equipment, pharmaceutical equipment, petrochemical equipment, etc..
Check Stock

JACO FlowPro Tire Inflator with Pressure Gauge - 100 PSI

  • Mechanic Recommended: Performance tested & calibrated accurate to ±2% at our NIST and ANSI certified calibration lab, providing the ability to measure, inflate, & air down tires with precision up to 100 PSI without relying on batteries. 0-100 PSI dial glows in the dark for high visibility at night..
  • Fully equipped with a solid steel body w/ a rugged matte black powder coated finish, heavy duty 21″ flexible hybrid air hose, precision “push-to-inflate” air filler thumb trigger, and built-in air bleeder valve to quickly air down overinflated tires..
  • Lightning Chuck – includes our all-new patented automatic lock-on Lightning Air Chuck w/ advanced locking mechanism & quick-release valve – no more leaking air or fighting with the valve stem for a proper seal..
  • Complete in-line inflation set – ready to attach to your air compressor set-up with 1/4″ NPT fittings – accessories includes (1) industrial quick-connect steel plug fitting, (1) thread seal tape roll, and Quick Start Guide..
  • 100% Lifetime Guarantee by JACO (for any reason) when you order today, so click “Add to Cart” with confidence and take your garage or shop tire filling setup to the next level w/ professional, industrial-grade air tools!.
Check Stock

Pfister F-031-4COC Courant Bridge Kitchen Faucet with Side Sprayer, Polished Chrome

  • Two handle bridge faucet for kitchen sink with side sprayer. Side sprayer installation is optional..
  • Kitchen bridge faucet spout swivels 360 degrees. Ceramic disc valve technology for smooth performance. Kitchen faucet side spray hose length of 47. 6 inches..
  • Two handle 8 inch bridge faucet spread with 3 or 4-hole installation (depending on use of side sprayer). TiteSeal eliminates the need for putty or silicone during installation. Flexible supply lines NOT included. 1/2” male OD connection at kitchen faucet..
  • Two handle kitchen faucet meets ADA/ANSI A117. 1 requirements, ensuring accessibility to all disabled persons..
  • 1. 8 GPM flow rated to meet or exceed CALGreen criteria, which helps to conserve water in the average home by at least 20 percent..
  • Bridge faucet complies with NSF/ANSI 372 and conforms with lead content requirements for “lead-free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U. S. Safe Drinking Water Act..
Check Stock

Accu-Gage RRA60X Professional Tire Pressure Gauge with Protective Rubber Guard 60 PSI

  • 60 PSI with flexible hose, bleeder and protective rubber guard installed.
  • Fully geared, precision movement with bronze Bourdon tube.
  • Accuracy conforms to ANSI B40.1 Grade B and California regulation.
  • Needle holds pressure reading until released.
  • push-button valve bleeds air to desire pressure.
Check Stock

Gate Sensor Wireless Vehicle Exit Sensor Gate Exit Wand for Driveway with Sensing Range Adjustment Five Wire Universally Compatible Detector and Works with Mighty Mule mmdia30d Gate Opener Accessories

  • OPEN GATES EFFORTLESSLY! No more remote control or keypad button to trigger your driveway gate openers. Just drive past the buried wand, the gates....
  • UNIVERSALLY COMPATIBLE with 100 ft CABLE Universally compatible with most automatic driveway gate opener systems. Mighty Mule mmdia30d Gate Opener and....
  • SENSE YOUR CAR, NOT YOUR LAWN MOVER! Unlike competition gate sensors, our device has a RANGE ADJUSTMENT board to prevent false gate opening by lawn....
  • FCC COMPLIANT Meets FCC standards 47CFR part 15 and ANSI C63.4-2014. Do check if other brands comply with FCC standards.
  • EASY SET UP IN A FEW MINUTES Comes with a VISUAL INSTRUCTION MANUAL for easy set up. In the unlikely event you aren’t delighted with the product,....
Check Stock

Accu-Gage H100X Professional Tire Pressure Gauge with Protective Rubber Guard 100 PSI

  • 100 PSI with flexible hose, bleeder and protective rubber guard installed.
  • Fully geared, precision movement with bronze Bourdon tube.
  • Accuracy conforms to ANSI B40.1 Grade B and California regulation.
  • Needle holds pressure reading until released.
  • push-button valve bleeds air to desire pressure.
Check Stock

Master Lock S806 Adjustable Lockout Tagout Steel Cable

  • Integrated safety lockout hasp and cable is ideal for multiple circuit breaker panels and side-by-side gate valve lockouts. Best when used as part of a comprehensive OSHA compliant lockout/tagout safety program.
  • Patented pull-tight cable adjusts for a secure fit every time.
  • Flexible, multi-stranded steel cable is insulated with a clear plastic coating (PVC free).
  • Tough, lightweight thermoplastic body withstands chemicals and performs effectively in extreme conditions.
  • 6 ft. (1.83 m) long cable with 3/16 in. (4 mm) wide diameter.
  • Includes one cable with integrated safety hasp and four holes for locks.
  • Supported locks include Master Lock 410, S3920 and American Lock A1100 (Padlocks sold separately).
Check Stock

Accu-Gage RH60X Professional Tire Pressure Gauge with Protective Rubber Guard 60 PSI ,Straight Chuck

  • 60 PSI with flexible hose, bleeder and protective rubber guard installed.
  • Fully geared, precision movement with bronze Bourdon tube.
  • Accuracy conforms to ANSI B40.1 Grade B and California regulation.
  • Needle holds pressure reading until released.
  • push-button valve bleeds air to desire pressure.
Check Stock

Master Lock 481 Lockout Tagout Rotating Gate Valve Lockout

  • Best used for valve lockout applications as part of a comprehensive OSHA compliant lockout tagout safety program.
  • Surrounds the valve operating handle to protect against accidental valve opening.
  • Unique, patented outward/inward rotation allows for easier installation.
  • Tough, lightweight and dielectric Zenex thermoplastic body withstands chemicals and performs effectively in extreme conditions.
  • 1-1/2 in. (38 mm) depth and 1-1/2 in. (38 mm) wide opening that fits 2 in. (51 mm) to 5 in. (127 mm) diameter valve handles.
  • Includes one rotating gate valve lockout tagout device with high visibility safety labels (English, French & Spanish).
Check Stock

TRADESAFE Gate Valve Lockout Device, 1\ to 2-1/2\ Diameter, 2 Pack, Lock Out Tag Out OSHA Compliant Valve Locks for Professional and Industrial Use

  • 2 Premium Quality Industrial Grade Thermoplastic Gate Valve Lockouts.
  • Fits 1" to 2-1/2" Diameter Gate Valve Handles with up to 3/4" Diameter Stems.
  • OSHA COMPLIANT: Lockout Tagout for Standard Gas, Propane, and Water Valves, Plus Forklift Gas Valves.
  • INDUSTRIAL USE: Intended for Professional and Industrial purposes (not recommended for household use).
  • TRUSTED LOCKOUT SUPPLIER: Real USA Based Safety Company.
Check Stock

JACO BikePro Bike Tire Pressure Gauge - 60 PSI (MTB Series) | Presta + Schrader Air Chucks

  • Performance tested on the trail & calibrated accurate to ±1.5% with ANSI certification at our industrial facility, ensuring precise pressure readings without relying on batteries - designed for mountain bikes, cars, trucks, & SUVs.
  • Larger, 2" glow-in-dark dial features easy-to-read dual measurement scale 0-60 PSI / 0-4 BAR, providing accurate readings that "lock" in place until the pressure reset button on the brass neck is pressed.
  • Robust & versatile design is equipped w/ interchangeable air chucks to fit both bicycle Presta and Schrader valve stems.
  • features built-in air bleeder valve to reduce pressure in overinflated tires.
  • Feels sturdy in the hand & built from solid brass shielded by our rugged gear-style protective shock guard.
  • features flexible no-leak air hose to easily get in between the spokes.
  • Proudly backed by our Lifetime Warranty - so ride with confidence & enjoy better performance & traction w/ properly inflated tires.
Check Stock

Accu-Gage RRA100X Professional Tire Pressure Gauge with Protective Rubber Guard Right Angle Chuck 100 PSI

  • 100 PSI with right angle chuck, flexible hose, bleeder and protective rubber guard installed.
  • Fully geared, precision movement with bronze Bourdon tube.
  • Accuracy conforms to ANSI B40.1 Grade B and California regulation.
  • Needle holds pressure reading until released.
  • push-button valve bleeds air to desire pressure.
Check Stock