Top Armytrix Exhaust Tips

2 Pcs Stainless Polished Muffler Exhaust Tip Finisher Compatible with 2016-2020 Honda Civic

  • Fits 2012-2020 Honda Civic With OEM Exhaust System (Will Not Fit Hatchback Sport or Si or Type-R).
  • Package includes: 2 x Exhaust Pipe Tip Finishers as Shown (Quantity 1 means 2 Exhaust Tips).
  • Made Of Stainless Steel Material in Nice Polished Chrome Finish.
  • Easy Installation- Direct Bolt-On To OEM Exhaust With Adjustable Screws.
  • Dramatically Enhance The Rear Appearance of your Car. Gives it a Sport Tone Right Away..
Check Stock

3 inch Exhaust Tip, MONOKING Black Exhaust Tip 3 inch Inlet Stainless Steel Clamp On Tailpipes for Truck Car 3″ Inlet 4″ Outlet 12″ Long

  • EXHAUST TIP 3 inch inlet -Universal fits 3” Outer diameter tailpipe. NOT fit 3” Inner diameter pipe. 3″ inlet diameter, 4″ outlet diameter, 12″ overall length. If your tailpipe has a 3” OUTER diameter it will fit perfectly.
  • POWERFUL SOUND – 3 inch Exhaust Tips improved powerful sound and distinctive style. 20 Degree of the angle end, slant cut design, Classic Black exterior improved appearance of your tailpipes. Made your car will seem skin to a sports car or at least a car with a modified engine.
  • DURABLE MATERIAL- 3in Exhaust Tip made from Sturdy 304 Stainless Steel not easy to fall off, also avoid rusting and deformation. A small hole on bottom of tip to drain water smoothly, avoid rusting.
  • CLAMP ON INSTALL – Holds up long time! Well thought out clamping mounting. It takes only 2 minutes easy to install. No welding or drilling is needed, just slide the tip into place on the tailpipe and clamps down tightly by tightening screws with a 6mm allen wrench.If you think it isn’t tight enough, additional welding will be a nice safeguard.
  • PACKAGE CONTENT – Package comes with 1x Exhaust Tip 3 inch inlet. MONOKING Universal black Exhaust Tips 3 inch inlet enjoy 1 YEAR warranty plus lifetime tech support and customer service. Ship from U.S. and....
Check Stock

Caltric Exhaust Pipe Gasket Compatible With Suzuki Dr-Z400 Dr-Z400E Dr-Z400S Dr-Z400Sm 2000-2017

  • This angle is not always present on the competitions exhaust tips as it is more time consuming to manufacture..
  • This Billet exhaust tip fits on the end of your OEM Yamaha exhaust system increasing your rides overall performance and sound..
  • This angled outlet directs the exhaust fumes down and away from fenders and tailgates..
  • This power tip can be used either with or without the stock exhaust screen..
Check Stock

2 Pieces Titanium Black Chrome Muffler Exhaust Tip Finisher Compatible with 2016-2021 Honda Civic

  • Fits 2012-2020 Honda Civic With OEM Exhaust System. Will Not Fit Hatchback Sport or Si Model. Exhaust May Need to be Adjusted For Installation..
  • Package Includes 2 x Exhaust Pipe Tip Cover as Shown. Quantity 1 Means 1 Pair of Tips.
  • Made Of Stainless Steel Material In Titanium Gunmetal Finish.
  • Easy Installation- Direct Bolt-On To OEM Exhaust With Adjustable Screws. Simply Slide in and Tighten up the Screw..
  • Dramatically Enhance The Rear Appearance of your Car. Gives it a Sport Tone Right Away..
Check Stock

Autarboor Exhaust Tip 3 Inch Inlet, 3' Inlet 4' Outlet 12' Long Mirror Polish Stainless Steel Bolt-On Exhaust Tailpipe Tip Slant Cut, Rolled Edge

  • 【Dimension】 Standard with 3 inch Inlet, 4 inch outlet, 12 inch overall length, bolt-on exhaust tips. Universally applicable to vehicles with 3 inch outer diameter of exhaust pipe..
  • 【Special Design】With elaborately mirror polished to keep your vehicle look cool style and new shiny look instead of the rusted old tailpipe. Slant cut design can drain your exhaust tailpipe timely.
  • 【High-grade Material】Made of high quality material stainless steel, strong anti-corrosive, durable exhaust tip, can greatly protect your original pipe from the sun and rain, avoid rusting and deformation.
  • 【Easy installation】Bolt-On exhaust tip don’t require welding or drilling operations, just simply slide the exhaust tip into the exhaust pipe and tighten it with a wrench.
  • 【Warranty】12 months warranty: Feel free to contact our customer service if you have any problem with our product.
Check Stock

Tnuocke 2.0" Butt Joint Band Exhaust Seal Clamp Sleeve,50mm Stainless Steel Exhaust Sleeve Band for Exhaust Pipe, Muffler,Manifolds,Coupler H-031-50

  • Premiun Materials:The exhaust clamp is made from high quality stainless steel, stainless steel material, not easy to rust, corrosion-resistant,Precision-machined, shiny surface with no burr.
  • Prefect design:Distributes the clamping force evenly over the entire 360° to provide tight sealing and prevent leaks and prohibit exhaust pipe distortion.
  • Easy install:Put one of the nutbars on one side and insert the bolts, put another nut bar on, then screw the nuts, and connect.
  • Wide use:They are fit perfectly for exhaust tips, mufflers, cat back systems, racing exhaust.
  • Package:You will get 1 stainless steel Exhaust Band Clamp,The exhaust band clamp is reusable without damaging the pipes.
Check Stock

2" Exhaust Clamps Narrow Band Muffler Seal Clamp Exhaust Tip, Exhaust Resonator, Exhaust Manifold, Exhaust Flex Pipe, Project Catalytic Converter Repair Stainless Steel 2.0 inch 2PCS

  • 【Application】Seal exhaust clamp is the muffler repair part, narrow strap clamp can be used for Catalytic Converter, Exhaust Tips, Exhaust Manifold, Exhaust Resonator, Exhaust Flex Pipe, Exhaust Muffler Repair Projects..
  • 【Function】The narrow band clamp adds the mild steel semi-circular gasket parts, it can hold the pipe tightly without loosening. Distributes the cla amping force evenly over the entire 360° to prevent leaks and control material distortion. Unique seal and high clamp loads are provided, without distorting your exhaust components, allowing the flexibility to disassemble for service..
  • 【Easy to Install】Easy and less time consuming to install or remove with one bolt. This exhaust clamp is adjustable, has been tested for strength, and is reusable without damaging the pipes..
  • 【Service】100% satisfaction guarantee, If you have any issues with the part , simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you..
Check Stock

LucaSng Universal 4 Turbo Dual Smoker Diesel Exhaust Stack T Pipe System with 2Pcs 4 Inlet 7 Outlet Gloss Black Stainless Steel Miter Cut Diesel Smoker Stack Tips 5 ID Inlet 36 Long With Clamps

  • Universal 4" Turbo Dual Smoker Diesel Exhaust Stack T Pipe Kit + 4"Inlet 7"OutLet Cut Stack Tips Gross Black.
  • Smoke kits:T409 Stainless Steel & Coated Black.
  • Cut Exhaust Stack Tip：Inlet: 4" (101.6mm), Outlet: 7" (177.8mm), Total length: 36" (914.4mm) Gloss Black Finish.
  • Fitment: Universal,For Truck, Dodge, Chevy.
  • Installation should depend on the inside diameter and outside size.
  • Professional installation is highly recommended.
  • Package includes1 Set Smoke kit with 2 Cut Exhaust Stack Tips.
Check Stock

SYKRSS 3 Stainless Steel Butt Joint Narrow Band Exhaust Seal Clamp with 1 Block

  • Application: Seal exhaust clamp is the muffler repair parts, narrow strap clamp can be used for Catalytic Converter, Exhaust Tips, Exhaust Manifold,....
  • Universal fitment, Joins 3.0" OD pipe to 3.0" ID pipe, There are 5 sizes for choose, it can meet your various needs. Please measure the size of your....
  • The narrow band clamp add the mild steel semi-circular gasket parts, it can hold the pipe tightly without loosening. The I-shape block again enhances....
  • Easy to remove and install, the exhaust band seal clamp chose the design of flexible bolt and nut structure. can easily disassemble and install them.....
  • SYKRSS value your shopping experience, If you encounter any problems in installing the 3.0" narrow band clamp, you can feel free to contact us via....
Check Stock

JWWY Stainless Steel Exhaust Muffler Tail Pipe Trim Cover for 2015-2022 Dodge Charger Exterior Accessories

  • Package: There are two pieces of 2.5 inches inlet exhaust tips in the package..
  • Specifications: The Apeixoto exhaust tailpipe tip has a standard 2.5’’ x 4’’x 9’’ dimension ( Inlet, Outlet and Length ). Please note that this tailpipe tip is only fit for the vehicles that is a 2.5 inches diameter inlet exhaust pipes..
  • Material: The Apeixoto exhaust tailpipe tip is constructed with 304 stainless steel. It has a much more shinny and beautiful surface. There is a blue burnt end on the tip. It looks very fashionable and powerful. This types of stainless steel also is rust and corrosion resistant. It will keep your vehicle always in a good look..
  • Installation: Please be noted that these tailpipes are weld on designed. A professional installation would be recommended. Good installation will make the tailpipe function better..
  • Warranty: 100% satisfaction. If you come across any issue or need any help for our Apeixoto exhaust tailpipe tip, feel free to ask and we are here to assists..
Check Stock

Skull Exhaust Tip, Christmas Halloween Skull Head Bone Exhaust Tips Decoration, Solid Metal Exhaust Tail Pipe Adapter for Universal Fitment on Most Cars Motorcycle (Diameter 2 Inch,1Pack)

  • REALISTIC LOOK DESIGN: The highly detailed skulls are designed with a realistic appearance. The skull exhaust pipe is installed on your motorcycle which will make your riding look cool and amazing..
  • REAL USABILITY: The solid metal skull exhaust pipe can be used as an ornament as well as a real use. It can effectively protect your tailpipe from dust, rain and rocks, also prevent it from deformation and damage. And it will not restrict air flow..
  • EASY TO INSTALL: Our skull exhaust tips can be installed on the car or motorcycle directly without any adapter. There is no need to replace any parts, and no weld is needed. It's super easy to Install..
  • CREATIVE GIFT: The decorative skull exhaust pipe is a creative and surprise gift for family and friends on Halloween, Thanksgiving Day, birthday, etc..
  • SUITABLE SIZE: Our exhaust skull is suitable for cars and motorcycles in which the diameter of exhaust pipe is 2 inches.This product is 1 pack, it is recommended that you buy 2 exhaust pipes at a time..
Check Stock

FORTLUFT Exhaust Dual Tip Carbon Fiber & Stainless Steel (3.50''/89mm, Dual Tip Competition Style RIGHT SIDE)

  • Right Side - Outside Diameter 3.50''/89mm - Inlet Pipe Outside Diameter 2.50''/63.5mm.
  • Universal, Stainless Steel and Carbon Fiber, Nonmagnetic.
  • FORTLUFT provides the guarantee for the Exhaust Dual Tip Slant Cut Competition Style Carbon Fiber & Stainless Steel corrosion-resistance for the 1-year period or during the next 15000 miles (24000 km) after the spare part installation..
  • The universal Exhaust Dual Tip Slant Cut Competition Style Carbon Fiber & Stainless Steel FORTLUFT is part of the automobile exhaust system. This element decorates and completes the exhaust system providing a car with the sport style look. Thanks to the universal fastening coupled with a clamp, this spare part can be used for any car brand..
  • The spare part has a modern design and is made from the high-quality Carbon Fiber & Stainless Steel. Exhaust Dual Tip Slant Cut Competition Style perfectly blends with the car making it look sporty and aggressively. Leading car tuning studios recommend such kinds of tips to their customers. Exhaust Dual Tip Slant Cut Competition Style Carbon Fiber & Stainless Steel has two nozzles of different lengths. There are two models provided depending on the installation method: left side and right side..
Check Stock