Top Automatic Bilge Pumps

AMRJ-32503 Mayfair Cartridge Bilge Pump - 500 GPH

  • Mayfair Cartridge Bilge Pumps make cleaning and maintenance easy! Cartridge Bilge Pumps can be removed for cleaning or replacement without the use of a single tool..
  • Lift a tab on the top, give the cartridge a twist, and pull it out.
  • that's all there is to it! Includes all-in-one motor/impeller unit with no loose parts. Feature a thermoplastic body, lip seal shaft seal and a stainless steel motor shaft..
  • 12V cartridge bilge pump with high impact housing. Easy installation and increased longevity. Corrosion, chemical and fuel resistant..
  • Permanent magnet motor along with permanent lubrication. T-Slot for easy float switch attachment.
  • 500 GPH, 3/4" Outer diameter discharge port, 5 Amp Fuse Size. Picture shows the 1000 GPH pump..
Check Stock

Seachoice Universal Series Automatic Marine Bilge Pump Float Switch For 6-36V

  • Converts DC bilge pumps to automatic operation.
Check Stock

Boeray Bilge Pump Switch Rocker Toggle Switch Panel and Fuse DC 12V 24V Max 15A SPST ON/Off Marine Switch Panel 1 Toggle

  • Switch Ratings:DC 12V,with 2 color LED indicator, auto is green ad manual is red.
  • Include On/Off auto or manual setting and cuircuit breaker protection, including wiring diagram further simplify installation,make your job easier.
  • Dimension:90x50x42.8mm/3"x1"x1.6"(LxWxH).
  • Include Switch Panel * 1, 5A fuse * 1, screw * 4, Identification sticker * 1.
  • Apply to use with automatic bilge systems with automatic pumps or external float switches.
Check Stock

H8eraide Bilge Cleaner - Eco Friendly Non-Foaming Boat Bilge Cleaner - Leaves Your Bilge Clean and Deodorized

  • ✔️THINK ABOUT WHAT YOU ARE PUTTING IN THE WATER - H8eraide has produced a 100% biodegradable Bilge Cleaner for boats that works. Our competitors do not care about the harmful effects of their cleaners, but we want to change YOUR OUTLOOK. Think before you clean and use boat cleaners that not only work but are safe! You will feel good about your boat cleaning!! Our bilge cleaner for boat is 100% biodegradable, non-foaming and safe on all bilge pumps!.
  • ✔️HELP US FIGHT CANCER! -Profits are donated to the H8 Cancer foundation to help find a cure for all types of cancer in our lifetime. Not only are you getting a great bilge cleaner you are helping a great cause!.
  • ✔️ ULTIMATE BILGE CLEANER & DEODORIZER - Our patented technology removes gunk and grime from your boat bilge easily!. Works on any boat as a great way to get a clean bilge. The only way to clean your boat is with H8eraide Bilge Cleaner!.
  • ✔️ECO-FRIENDLY! -Our Environmentally Safer formula contains no unnecessary ingredients and is 100% biodegradable per OECD guidelines. Phosphate-Free, Contains no artificial fragrances, no dyes, no thickening agents, no chelating agents, no NPE or SLS surfactants, and no solvents..
  • ✔️ - If our product does not meet your expectations reach out to us....
Check Stock

SeaChoice 19301 Submersible 2000 GPH Bilge Pump

  • 【Specification】：Outlet Diameter : 29mm/ 0.95 Inch (1-1/8") POWER：1100 GPH Current(A）：3.2A Volt：12V.
  • 【Automatic mode connection】：Connect black wire to negative,Connect brown wire to positive,the pump will be shut off automatically when the water is pumped out.This auto bilge pump 1100 gph would improve work efficiency and could be used for a long term..
  • 【Advantages】:Equipped with built in electronic controlled sensor system for easy fully automatic operation.It is a small automatic boat bilge pump and it is rustproof and corrosion resistant..
  • 【Warning】:This auto boat bilge pump is designed for use with fresh water and salt water only. And polarity is important. If it is not correct, the pump rotate backwards..
  • 【Applications】:Ideal For Fishing Boats, Cruisers, Runabouts, Yachts, skiff, etc..
Check Stock

Shoreline Marine Bilge Pump Plumbing Kit | Plastic Bilge Pump Hose | 2 Stainless Steel Hose Clamps | Easy Installation | Heavy-Duty Marine Accessory

  • BILGE PUMPS & PLUMBING: The kit is among the functional boat accessories that allow you to remove the accumulated water from the bilge. This kit consists of a plastic bilge pump hose, thru-hull fitting, and 2 stainless-steel hose clamps..
  • HIGH COMPATIBILITY: Irrespective of the size of the boat, this high utility water pump works in accordance with 3/4" x 5" of the plastic bilge hose. This kit contains everything you need for bilge pump installation..
  • EASY TO USE: With a pack of all the essential parts and equipment required to perform the pumping task, this kit makes it one of the best marine boat accessories. It is fast and easy to use..
  • DIMENSIONS: The kit consists of 3/4 inches and 5 inches of plastic bilge pump hose, along with a thru-hull fitting and 2 stainless-steel hose clamps that work efficiently to remove the excess water from the hull. It works wonders with a bilge pump float switch..
  • CALCUTTA OUTDOORS: A leading manufacturer of consumer products for the outdoor sports and recreation market providing performance-driven products, including fishing rods, ta....
Check Stock

attwood Sahara MK2 800 GPH 12-Volt Automatic Bilge Pump

  • 800 GPH, 12V, Fuse size: 4A, Outlet type: 3/4" & 1" barbs, Check valve: yes, Wire length: 29 1/2".
  • The easiest, most reliable automatic bilge pump ever designed.
  • The only automatic bilge pump that eliminates air-locks, Patented X-Air Impeller ejects trapped air in the pump and pipework.
  • Flexible Outlets: 90° rotatable elbow outlet allows users to install the pump anywhere in a full 360° orientation.
  • Single-Hand Pump Cartridge Release: Convenient when trying to access a pump located in a hard-to-reach area of the boat’s hull.
  • Universal Backwards Compatible Design: 7-pump mounting hole pattern for replacing any top bilge pump in its category.
  • SteadySwitch: Buoyancy control reduces cycling, draining the bilge not the battery.
  • No Pipe Or Hose Removal Required: Reduces the time that it takes to replace the cartridge.
  • Improved Motor Cooling/Heat Dissipation: Prevents overheating that may cause failures, such as blown fuse, leaking, etc..
  • Includes straight outlet and check valve.
Check Stock

Whale BE9003 Electric Field Sensor Switch, 12V or 24V, Suitable for Up to 20 Amps

  • Precision switch automatically activates and shuts off bilge pumps when water reaches specific levels.
  • Worry-free, precise operation ensures proper bilge pumping and provides peace of mind.
  • Automatically activates bilge pump when 2 inches of water is sensed.
  • Turns pump off when water level drops below ½ inch.
  • Two color-coded wires make installation easy.
  • Two test circles can be used to ensure activation.
  • Offers side or base mounting, can operate with 12V or 24V power, and it is suitable for up to 20 amps.
Check Stock

Rule 3003.7351 Bilge Pump Motor Cartridge 700 GPH

  • Fits Rule Cartridge and Bilge Live well/Aerator pumps.
  • Fuse Protection: 5A (fuses sold separately).
  • Works with Pro-Series Live well pumps (now discontinued).
Check Stock

Rule Marine Tournament Series Livewell Pump 800 GPH

  • Fits Rule Cartridge and Bilge Live well/Aerator pumps.
  • Fuse Protection: 5A (fuses sold separately).
  • Works with Pro-Series Live well pumps (now discontinued).
Check Stock

Rule 500 GPH 25SA Electronic Sensing Bilge Pump-500

  • Head: 4.0M, Wire Lead: 1M, Outlet Dia: 29mm(1-1/8"), Dimension: 5.92“*4.21"/150.5mm*107mm..
  • 【Switch】Built-in float switch: No float switch required.Pump turns on when water level rises & shuts off when water is removed. Snap-off strainer for easy cleaning.
  • 【Long life motor】 :Water cooled motors for long life, with anti airlock design and moisture tight seals.Heavy duty motors with stainless steel shafts and tough thermoplastic bodies..
  • 【Durable】: All (Auto) Bilge Pumps are built with compact, rust and corrosion protected stainless steel shaft, high-impact durable and thermoplastic ABS plastic housing..
  • 【Fast Speed】When water level rises,pump can turn on bout 1 1/2 inch when it’s sitting in the bottom of the bilge at the back of the boat. It definitely pumps the water out fast! 5 Gallons underneath motor and the pump spit it out in about 20 seconds..
Check Stock

Float Switch for Sump Pump - 6-Foot Water Level Sensor with Honeywell Microswitch and Adjustable Tether Length for Ground Water Bilge Pump and Water Tank – Non-Corrosive PP Casing, Rated to 13 Amps

  • CONTROL WATER FLOW into and out of tanks and valves with a sump pump float switch by Water Boss. This float level switch helps reduce overflow potential of light to medium amounts of suspended solids..
  • HONEYWELL MICRO SWITCH ensures a high-precision sump pump switch with accurate repeatability and extended life. This water sensing switch is rated up to 13 amps or 1/2 HP and has CE and IEC approvals..
  • NON-CORROSIVE CASING of the Water Boss Float for water tanks and bilge pumps is IP68 rated. Rugged polypropylene construction also makes this water level switch temperature-resistant from 32°F to 140°F..
  • ADJUSTABLE TETHER of its 6-foot PVC jacketed cable makes our automatic bilge switch suitable for an array of applications. Eliminate complex automation with this sump pump replacement float switch..
  • 5-YEAR WARRANTY against manufacturer defects lets you select the Water Boss Sump Pump Float Switch Replacement with confidence. This reliable float switch yields big savings in flood repair costs..
Check Stock