Top Boat Bilge Pumps

creatorele DC 12V 24V 32V Automatic Boat Bilge Float Switch Bilge Switches Flow Sensor for Automatic Electric Water Pump

  • 【Bilge Float Switch】:Can be connected to various submersible pumps, bilge pumps,and water pumps .Shells made of high quality ABS material, the internal metal contacts to ensure reliable start / stop..
  • 【Use with pumps】:Turn pump on when water level reaches 2″(51mm).
  • Turn pump off when water level reaches 3/4″(19mm)..
  • 【Performance】:Long life, switching frequency up to 10 million times.
  • Ultrasonic welding, forming a seal, reliable and secure, not leaking..
  • 【Specification】:Max Amps 12volts: 20A / Max Amps 24volts: 10A / Max Amps 32volts: 8A.
  • 【Easy to Clean】:Ideal flow sensor for bilge pumps Latest design includes a removable base for easy cleaning and servicing..
Check Stock

Seachoice 12201 2-Position Illuminated Toggle Switch – On/Off

  • Two-position on/off toggle switch is suitable for the operation of running and anchor lights, bilge pumps, blowers and baitwell pumps.
  • Suitable for operating running and anchor lights, bilge pumps, blowers, baitwell pumps and more.
Check Stock

Hand Bilge Pump Manual Hand Water Pump for Kayaks Canoes and Boats Emergency Hand-Operated Marine Bilge Pump with Reversible Hose

  • ⛵HAND BILGE PUMP FOR BOATS: Our manual bilge pump length is 17", and the maximum unfolded length is 28.3", which is easy to store and takes up minimal space. It’s the perfect boating accessory for kayaks, canoes, dinghys and small boats. Our bilge pump remove water quickly and downward strokes for maximum efficiency and less fatigue.
  • ⛵MAKES WATER REMOVAL EASIER & FASTER: Our hand water pump features a 34.6" long hose with a 1.16" intake nozzle and 1.37" diameter hose that makes reaching the bottom of your boat easier and removing excess water faster. This hand suction pump works great to remove water from the bottom of a motorboat, canoe or dinghy.
  • ⛵EASY TO USE: Just simply connect the hose to the end of the pump, insert the bottom of the pump into the water, and use the handle to start pumping. It sucks water when you push the handle in, and disperses the water when you pull the handle out!.
  • ⛵NO CLOG FILTER & ANTI-LEAK DESIGN GASKET: Our marine bilge pump Features a filtered nozzle to prevent seaweed, leaves and debris from clogging this hand water pump. And The premium rubber sea....
Check Stock

Whale BP3000 Gusher 30 Manual Bilge Pump, On-Deck, up to 31 GPM Flow Rate, 1 ½-Inch Hose Connections, for Boats Over 40 Feet

  • Proven manual bilge pump with a robust design to stand up to the most demanding marine environments and conditions.
  • Designed for bilge or holding tank pump-out on a boat 40 feet long or longer.
  • Rugged, corrosion-resistant Marine Grade LM6 alloy construction with a powder coat finish.
  • High-capacity double acting pump that pumps on both the to and fro strokes.
Check Stock

AMRM-4505-7 Attwood Sahara Automatic Bilge Pump - 500 GPH

  • The Attwood Sahara Bilge Pump is a durable, compact, and easy to install automatic bilge pump. The Sahara has everything contained in one compact yet durable package, making this pump a great option for tight spaces. This series of bilge pump features a 316 stainless steel motor shaft for corrosion resistance and a durable high-impact, glass-filled polyester impeller. The base of the pump has quick, one-handed removal for easy disassembly for cleaning..
  • Pumps include 36" lengths of 16-gauge caulked and tinned copper wire. An automatic-switch bilge pump is a requirement for any vessels 20’ especially those that accommodate overnight passengers and crew. All Attwood bilge pumps come with a 3 year manufacturer's warranty..
  • Mercury-free switch. Test knob for easy operational check Non-restrictive float movement. Larger filter area resists clogging.
  • Free flow of water around housing keeps motor cool. 316 Stainless Steel motor shaft for saltwater corrosion resistance. Durable high-impact, glass-filled polyester impeller.
  • Sahara S500 Part #: AMRA-4505-7, GPH at Open Flow: 500, GPH at 3.3' Head: 350, Hose Size: 3/4" I.D..
Check Stock

Amarine Made 1100gph 12v Boat Marine Plumbing Electric Bilge Pumps (1100gph 12v)

  • 【1100gph with 1-1/8 Hose】The Amarine-made submersible bilge pumps are tough enough for any bilge. Use together with a 1 1/8 inch hose..
  • 【High Flow】: for use from 22-234L / Min (1.32-14.04 cubic meters / hour).
  • 【Small but Efficient】Small size, high efficiency, low current (low cost switching power supply supporting).
  • to achieve a small size perfect combination of high flow.
  • 【Advantages】Built for the harsh marine environment, good for both saltwater and freshwater. The water-cooled engine ensures a long service life.Heavy duty motors with stainless steel shafts and tough. thermoplastic bodies submersible bilge pumps are tough enough for any bilge.
  • 【Applications】Ideal For Fishing Boats, Cruisers, Runabouts, Yachts, skiff, dingy, fish tank,as a portable shower, etc..
Check Stock

AMRJ-32903 Mayfair Cartridge Bilge Pump - 1000 GPH

  • Mayfair Cartridge Bilge Pumps make cleaning and maintenance easy! Cartridge Bilge Pumps can be removed for cleaning or replacement without the use of a single tool..
  • Lift a tab on the top, give the cartridge a twist, and pull it out.
  • that's all there is to it! Includes all-in-one motor/impeller unit with no loose parts. Feature a thermoplastic body, lip seal shaft seal and a stainless steel motor shaft..
  • 12V cartridge bilge pump with high impact housing. Easy installation and increased longevity. Corrosion, chemical and fuel resistant..
  • Permanent magnet motor along with permanent lubrication. T-Slot for easy float switch attachment.
  • 1000 GPH, 3/4" Outer diameter discharge port, 5 Amp Fuse Size. Picture shows the 1000 GPH pump..
Check Stock

AMRJ-32503 Mayfair Cartridge Bilge Pump - 500 GPH

  • Mayfair Cartridge Bilge Pumps make cleaning and maintenance easy! Cartridge Bilge Pumps can be removed for cleaning or replacement without the use of a single tool..
  • Lift a tab on the top, give the cartridge a twist, and pull it out.
  • that's all there is to it! Includes all-in-one motor/impeller unit with no loose parts. Feature a thermoplastic body, lip seal shaft seal and a stainless steel motor shaft..
  • 12V cartridge bilge pump with high impact housing. Easy installation and increased longevity. Corrosion, chemical and fuel resistant..
  • Permanent magnet motor along with permanent lubrication. T-Slot for easy float switch attachment.
  • 500 GPH, 3/4" Outer diameter discharge port, 5 Amp Fuse Size. Picture shows the 1000 GPH pump..
Check Stock

Bilge Float Switch, Huazu Automatic Bilge Pump Float Switch Rule Float Switch DC 12V 24V 32V for Boats Ignition Protected Mercury Free

  • DURABLE: The shell of bilge pump float switch is made of high-quality ABS material, which has high strength and durability, and the internal metal contacts ensure reliable start/stop. The switch can be removed from the base for easy cleaning and servicing..
  • USE WITH PUMPS: The bilge float switch is automatic and can be connected to various submersible pumps, bilge pumps, and water pumps. Turn the pump on when the water level reaches 2″ (51mm) and turn off the pump when the water level reaches 3/4″ (19mm)..
  • PERFORMANCE: The switching frequency is up to 10 million times, which can be used for a long time.
  • ultrasonic welding forms a seal, reliable and safe, not leaking..
  • SPECIFICATION: Max Amps 12volts: 20A / Max Amps 24volts: 10A / Max Amps 32volts: 8A.
  • WIDE APPLICATION: This automatic float switch can be widely used in fishing boats, cruisers, runabouts, yachts, aquariums, small swimming pools, water reservoirs, fountains and other places that need drain the water..
Check Stock

SeaChoice 19301 Submersible 2000 GPH Bilge Pump

  • 【Specification】：Outlet Diameter : 29mm/ 0.95 Inch (1-1/8") POWER：1100 GPH Current(A）：3.2A Volt：12V.
  • 【Automatic mode connection】：Connect black wire to negative,Connect brown wire to positive,the pump will be shut off automatically when the water is pumped out.This auto bilge pump 1100 gph would improve work efficiency and could be used for a long term..
  • 【Advantages】:Equipped with built in electronic controlled sensor system for easy fully automatic operation.It is a small automatic boat bilge pump and it is rustproof and corrosion resistant..
  • 【Warning】:This auto boat bilge pump is designed for use with fresh water and salt water only. And polarity is important. If it is not correct, the pump rotate backwards..
  • 【Applications】:Ideal For Fishing Boats, Cruisers, Runabouts, Yachts, skiff, etc..
Check Stock

Newport Kayak Hand Bilge Pump, Blue

  • DUAL ACTION: Our Kayak Hand Bilge Pump is dual action, meaning whether you're pushing or pulling, it's still pumping water out of your boat..
  • FLOATING: If you drop it overboard, this pump will float back up to the surface for you..
  • EJECTION TUBE: Our pump includes an ejection tube, so the water you pump doesn't end up back in your boat..
  • WHY: Quickly pump water out of the floor of your kayak, canoe, jon boat, inflatable dinghy, sailing dinghy, or other small watercraft. Use the ejection hose to clear the hull so the water isn't ending up back in your boat..
  • INCLUDED IN BOX: Kayak Bilge Pump w/ Foam Float, Water ejection tube.
Check Stock

Mainstream Marine Boat Bilge Cleaner and Degreaser, Biodegradable Cleaning Product for Boats, Removes Scum and Odor, 100 Tablet Jar

  • FAST-ACTING CLEANER – The QwikTreat Bilge Cleaner for boats are fast-acting tablets that are able to access all the nooks and crannies of a bilge to control bilge scum and sludge. 100 Tablet Jar..
  • REMOVES SCUM AND DEPOSITS – Even the toughest jobs are no match for this bilge cleaner and degreaser. It effectively removes scum and other deposits from your bilge water and also controls bilge odors..
  • 100% SOLUBLE AND RESIDUE-FREE – A 100% soluble bilge cleaning product, it leaves no residue behind. It keeps the bilge water flowing freely, and prevents clogs in limber holes..
  • ENVIRONMENTALLY-SAFE – Our boat cleaning products are eco-friendly and safe for all marine environments. This biodegradable bilge cleaner will do no harm to marine plants and organisms..
  • HIGH-QUALITY, AMERICAN PRODUCTS – At Mainstream Marine, we turn cutting-edge technology into top-of-the-line, affordable products. All of our products are proudly designed and manufactured in the USA..
Check Stock