Top Balanced Output

Topping D10 Balanced USB Converter HiFi Converters TRS/XLR/Opt/Coax Output ES9038Q2M XMOS XU208 PCM384KHz DSD256 Digital to Analog Converter Home Audio DAC (Black)

  • ★ The Difference: D10 Balanced is a supplement to D10s, the two are in a coexistence relationship, the method of use is same.
  • D10s is for Single-ended applications, D10 Balanced is for Balanced applications. (NOTE: The balanced output of D10 Balanced does not support conversion to single-ended (RCA) in any way..
  • ★ USB Interface Application: If you already have a better DAC, you can connect D10 Balanced's coaxial/optical output to your DAC,then D10 Balanced serve as a USB bridge..
  • ★ Audio Format & Sampling Rate indicator: D10 Balanced is compatible with 16-32bit/44.1-384KHz and DSD64-DSD256 Native.
  • It can accurately indicate the audio format(PCM or DSD) and sampling rate of the playing music. Orange LED is soft and not dazzling even at night..
  • ★ D10 Balanced supports professional ASIO applications. It can be set in the music playback software.
  • When using ASIO with Windows, you can use the customized driver from Thesycon..
Check Stock

Rockville REQ231 Dual 31 Band 1/3 Octave Graphic Equalizer with Sub-Output, Grey

  • Rockville REQ231 Dual 31 Band 1/3 Octave Graphic Equalizer With Sub-Output. Dual channel (31 bands per channel). Variable stage low and high cut filters..
  • 1/3 octave filter sets (ISO centers). 20 Hz to 20 kHz effective equalization range. Constant Q filters. Selectable 6dB or 12dB cut or boost range. Output level LEDs (-10 to +17 dB)..
  • Bypass switch with status LED. Balanced XLR input/output. Subwoofer out. Channels: 2 (stereo). Connectors: XLR balanced inputs and outputs. Bands: 31 per channel..
  • Frequency Centers: 20 Hz, 25 Hz, 31.5 Hz, 40 Hz, 50 Hz, 63 Hz, 80 Hz, 100 Hz, 125 Hz, 160 Hz, 200 Hz, 250 Hz, 315 Hz, 400 Hz, 500 Hz, 630 Hz, 800 Hz, 1 kHz, 1.25 kHz, 1.5 kHz, 2 kHz, 2.5 kHz.
  • Control Range: Selectable +/-12dB 0r +/-6dB. Input Impedance: 50k ohms. Output Impedance: 600 ohms. Maximum Output Level: +21dBLevel Control: +/- 10 dB. Signal to Noise: 003e93 dB. Distortion: 0.005%..
Check Stock

Aguilar Tone Hammer 500-Watt Bass Amplifier Head

  • 500 watts into 4 ohms, 250 watts into 8 ohms.
  • Fully adjustable, Drive Control featuring Aguilar’s proprietary AGS(adaptive gain shaping) circuit..
  • Balanced Output: XLR balanced output with pre/post EQ and ground lift switch.
  • One 1/4 Inch input jack, compatible with all active and passive basses.
Check Stock

FiiO AM3 Balanced Output Headphone Amplifier Module for X7 Portable High-Resolution Audio Player, Titanium

  • ...ared to the original, output power is increased by 225% up to 3000mW per channel with a lower output impedance – allowing it more effortlessly power all kinds of headphones..
  • [Desktop-level connectivity]: The M17 mp3 player features : 3.5mm output: headphone out/line out.
  • 4.4mm output: balanced headphone out/balanced line out.
  • RCA coaxial port: coaxial input and output.
  • USB 3.0 port: supports USB Host and Device modes, can be used for high-speed data transfers and fast charging.
  • USB 2.0 port: supports USB Host mode, allowing external DACs or hard drive storage to be connected..
  • [Desktop-tier heat dissipation]: With exceptional audio quality comes with large power consumption, so effective heat dissipation was a large focus when designing the M17 music player. Not only are "H" type heat dissipation and VC liquid cooling technologies adopted, the bluetooth mp3 player M17's 151g unibody aluminum alloy frame also effectively transfers heat out of the device. Finally, the cooling fan stand also further makes sure heat is rapidly transported away..
  • [Desktop-quality power supply]: The M17 desktop mp3 player contains two power supplies – a battery power supply and a power supply powered by e....
Check Stock

POWER ACOUSTIK BAMF1-5000D BAMF Series Monoblock Class D Amp (5,000 Watts...

  • Bass Restoration with Lighted Display, Illuminaited Logo Plate and Chrome Finish. Eyes Light up with Red LED's.
  • Max.Bass Control with Dash Mount Remote Control for PFM Subsonic Filter & Bass Level Control.
  • Balanced Inputs, Bass Output Control with PWM High Head Room Power Supply.
  • Output Level: 13.5 volts, Frequency Response: 10Hz - 100KHz.
  • THD: 0.002%, S/N Ratio: 132dB, Balanced Input Noise Rejection: 60 dB.
Check Stock

Topping D30 Pro 4*CS43198 Chip DAC Hi-Res Audio DSD256 PCM384kHz XMOS XU208 Preamplifier RCA XLR USB Optical Decoder Black

  • The THD+N of D30Pro is no higher than 0.00009%， which means the D30Pro accurately restores 99.99991% of the original sound.
  • The 4 x CS43198 provide a total of 8 full balanced channels. So each channel of the D30Pro will be arranged in parallel by 4 conventional balanced....
  • USB support DSD256 & PCM384k Hz high resolution audio :D30Pro uses 2nd generation 8 core XMOS XU208, USB supports up to PCM32bit 384kHz and DSD256....
  • D30Pro has full balanced XLR output and single ended RCA output. You can choose "XLR only" , “RCA only” or“XL R+RCA” output to meet different....
  • CPLD focusing on clock processing and digital signal optimization, restoring what the digital signal should be..
Check Stock

Audinate Dante AVIO – Analog Input Adapter 1-Channel

  • Maximum Gain: Balanced-to-unbalanced: -8dB, Unbalanced-to-balanced: +20dB.
  • Maximum Output: +18dB balanced, +12dB unbalanced.
  • Maximum Input: +22dB balanced and unbalanced.
  • Power requirements: 12VDC, AC adaptor included.
Check Stock

BBE 282iX Desktop Sonic Maximizer with Balanced 3-Pin XLR Connections

  • "A full-function Sonic Maximizer +23dB of output headroom (282iX), +20dB (282iR and iQ) 108dB signal-to-noise ratio Balanced XLR (282iX)".
  • "+23dB of output headroom (282iX), +2dB (282iR and iQ)".
  • Perfect for studio, or professional live sound applications.
Check Stock

Cable Matters Dual RCA to XLR Unbalanced Interconnect Cable 10 ft, 2 RCA to XLR Male Cable (Dual XLR to RCA Cable) - 10 Feet

  • Balanced to unbalanced cable converts an unbalanced dual RCA output to balanced XLR input.
  • Dual XLR male to dual RCA male connects an AV receiver with RCA line output to a power amplifier with XLR balanced inputs.
  • Unbalanced XLR cable is wired with XLR pin 2 connected to the RCA plug tip.
  • XLR pins 1 and 3 are connected to the shield of the RCA plug.
  • Connect this balanced to unbalanced converter cable from equipment with a dual RCA phono output to a subwoofer with XLR input.
  • Shielded RCA to XLR converter with oxygen-free copper (OFC) conductors and braided shielding provides maximum cancellation of hum and noise of an unbalanced audio signal.
  • A lifetime warranty is included with this Shielded XLR cable for peace of mind when purchasing.
  • Robust construction of this XLR to RCA adapter includes a flexible PVC jacket with gold-plated connectors.
  • Shielded XLR male connectors have molded strain relief to support the weight of the cable.
  • RCA connectors have easy-grip treads with a split blade housing for a secure connection.
  • XLR female input compatible with a subwoofer with XLR input such as the Mackie Subwoofer.
  • XLR to RCA adaptor connects to an audio mixer such as the Behringer Mixer.
  • Instantly connect a DJ Controller with an RCA phono jack to speakers with XL....
Check Stock

DS18 DBP-1 Digital Bass Reconstruction Processor - Enhance The Lower Frequencies On All types of Music and Reproduction Formats RED One Size

  • DS18 DBP-1 digital bass reconstruction processor - enhance the lower frequencies on all types of music and reproduction Formats.
  • Max bass control with dash mount remote control for pfm subsonic filter & bass level control.
  • Balanced inputs, bass output control with PWM high head room power supply, selectable grounding mode (balanced or unbalanced).
  • Output level: 13.5 volts peak, maximum input level: 15V RMS, frequency response: 10Hz - 100Khz.
  • Thd: 0.003%, s/openings ratio: 130Db, balanced input noise rejection: 60 dB.
Check Stock

SMSL HO200 Hi-Res Balanced Headphone Amplifier Low Noise 4xPLFC RCA/XLR Input 6.35mm 4.4mm XLR Balanced Output HiFi Preamp Headphone Amplifiers with High Mid Low Gain Control for AO200

  • √ High Power Output: SMSL HO200 not only can be used as a headphone amplifier, but also can be used as a Hi-End Pre Amplifier. At the output power of 16 ohms power up to 6W, 32 ohms at 3w!.
  • √ Low Noise Headphone Amplifier: 4 x PLFC ultra-low distortion precision linear feedback circuits are used. Distortion as low as 0.00006%, signal-to-noise ratio up to 140dB!.
  • √ Balanced / Single-ended Output: HO200 provides 4 core XLR balanced, 4.4 balanced and 6.35 single-ended headphone output interface respectively, to meet the needs of different headphones!.
  • √ Three-step Gain Switching Switch: Using the classic toggle switch rotary button, there are high, medium and low three-step gain switching switch. More convenient to switch gain control, where the low gain is optimized for IEM only!.
  • √ Streamlined Design: Anodized technology, external aluminum CNC machining shell, fine workmanship, ultra-compact design, simply the top of the desktop headphone system!.
Check Stock

Replacement Amplifier Module Electro Voice EV ELX118P, ZXA1 Power Sub Speaker

  • Power Rated @ 8 ONLY Output Power : 20-20kHz, 1W with 1 khz Power Output RMS : 500 W RMS, 900 W peak (overall) @ 8..
  • Frequency Response : (0.3dB,1W/8) : 20 Hz - 34 kHz /THD : 20 Hz - 20 kHz for 1 W112 dBA /Channel separation : (Crosstalk) at 1 kHz >70 dB.
  • Input Connectors (per channel) : 3-pin XLR, 1/4" phono, electronically balanced/. Output Connector (Mix Out) : 3-pin XLR, electronically balanced /Class : TD/ Operating voltage : 220 V / 110 V nominal 190-240 V / 90-130 V.
  • Dimensions : (LWD) : 13.75" x 6.75" x 3" (349.25mm x 171.45mm x 76.2mm). /Packing dimension : 15" x 10" x 4.5" (381mm x 254mm x 114.3mm) /Net weight :4 lbs (1.81Kgm) / Gross weight :4 lbs(1.81Kgm).
Check Stock