Top Ball Valve 2

Habitech 2-Pack In-Line Barbed Ball Valve 13mm For 1/2 Inch Tubing .520 ID - Regulate and Shut-Off/On Water Flow

  • Important: Be sure to check the sizes and buy the right valve. This 13mm ball valve works with 1/2" tubing with 0.520 Inside Diameter (ID). If you need valves for 1/2" drip irrigation tubing, which has a larger inside diameter 0.570 to 0.620, then select the 16mm size valve..
  • Complete Flow Control: 1/2-inch inline ball valves (2 Pack) are the perfect way to regulate the water flow of your aquarium, aquatic or hydroponic systems with a simple turn of the knob. Slip your tubing onto the barbed ends of this shut-off valve coupling to control, disperse, slow, divert or completely stop water flow..
  • Fully Adjustable: Adjust the flow anywhere from full-open to full-stop. Easy to install and use with clear on and off markings. Compactly sized and smooth to turn, these quality acetal barb ball valves won't stick like PVC ball valves..
  • Versatile: Customize a secondary water zone, create individual dripline control, use as tank valves, drain valves, return valves or in any situation where fluid restriction is needed. For use with irrigation, aquarium plumbing, pump return line, saltwater applications, RV camper and trailers, pex tubing, hydroponics, and aquaponics..
  • Leak-Free Seal: These non-corrosive plastic flow valve fittings are guaranteed to pro....
Check Stock

PVC COMPACT BALL VALVE 4" - Socket - Sanipro

  • EZ-FLO SCHEDULE 40 PVC BALL VALVE: This EZ-FLO ball valve is suitable for use as an inline valve for connecting two pipes going in the same direction.
  • equipped with a 3/4 inch slip connection on each end.
  • DURABLE: This schedule 40 PVC ball valve is made of heavy-duty CPVC that protects against corrosion and provides strength and durability.
  • EASY TO USE: This PVC ball valve is equipped with a quarter-turn red plastic handle for an easy-to-control water flow.
  • SPECS: This valve can withstand a working pressure of 150 PSI and a maximum temperature of 140 degrees F.
  • SAFETY: This ball valve complies with lead-free guidelines for potable water applications.
Check Stock

DERNORD Stainless Steel Ball Valve 1PC Type 0.25\ NPT Standard Port for Water, Oil, and Gas (1/4 Inch Ball Valve)

  • Serviceable Stainless Steel Ball Valve - Can be taken apart via threads, Threaded Connector Type Female to Female 1/4 Inch NPT.
  • Stainless Steel 1PC Ball Valve Handle: Handle with blue vinyl insulation.
  • Body & Ball Type:304 Stainless Steel.Temp Range:-60 F to 450 F.
  • Stainless Steel 1PC Ball Valve Nominal Working Pressure:1000 WOG:Max 1000 psi for Water, Oil, Gas,.
  • NOTE: DERNORD 1PC Type Ball Valve Standard Port is not full port type, the size we marked is only the thread size this ball valve fits. If you need full-bore ball valve, please check the related products in Product Description..
Check Stock

2Pcs Brass Float Valve 1/2" Supply Tube Automatic Fill Water Adjustable Float Ball Valve with Adjustable Arm Water Float Valve for Livestock Waterer, Aquariums,Ponds, Aquaculture, Hydroponics

  • PACKAGE INCLUDED: You will receive 2 pieces water float ball valves and 1 roll plumber's tape..
  • PRINCIPLE of OPERATION: The float valve could control the flow rate and opening and closing of the inlet pipe through the floating of the ball. When the water level rises to a certain level, the water injection will be cut off.
  • when the water level drops to a certain limit, the water is automatically injected..
  • APPLICATION: The float valve is suitable for water storage tanks, pools, aquariums, fish tanks, livestock sinks, aquaculture, etc. 1/2" male thread inlet, suitable for most types of water pipes, easy to install and adjust..
  • HIGH QUALITY MATERIAL: The arm and connector of water float ball valve is made from high quality brass and the float ball body is made from plastic..
  • AFTER-SALES SERVICE: The float ball valve can only work properly if the water pressure is appropriate. We promise to provide every customers with satisfying shopping experience. If you come across any issues during use our products, please feel free to contact us..
Check Stock

3/8” High Pressure Ball Valve for Pressure Washer Gun, Plated Brass Power Washer Shut Off Valve DN10, 3000 PSI (3/8" Female BSP)

  • 【100% No-risk Purchase】If you receive any problems with pressure washer ball valve, you can get a full refund or a new one for free! Please feel free to contact us if you have questions during use. We will give you a satisfactory answer within 12 hours. Customer satisfaction is our tireless pursuit..
  • 【Convenience and Safety】Ball valve for pressure washer gun is made of lightweight material, 3/8" Female BSP Inlet x 3/8" Female BSP Outlet with round frame. DN10 ball valve unique design can withstand high Pressure can be used for pressure washer gun, foam cannons and power washer..
  • 【Solid Structure】The power washer shut off valve is made of high quality plated brass for compactness, ruggedness, and enhanced rust and corrosion resistance for long-term worry-free use. The high pressure ball valve can reach a maximum working pressure of 3000 PSI and a maximum working temperature of 176 degrees Fahrenheit..
  • 【Leakproof Performance】Power wash ball valve with excellent PTFE (Polytetrafluoroethylene) seals provide perfect leakage protection and improves performance through high heat and chemicals. No need to ....
Check Stock

STYDDI Stainless Steel High Pressure Washer Shut-Off Ball Valve Kit with 3/8' Quick Connect for Power Washer Hose, 4500 PSI

  • BRINGS CONVENIENCE AND SAFE - The biggest advantage of using a pressure washer shut off ball valve kit is changing the implements safely and conveniently during cleaning. It allows you to switch from your surface cleaner to the gun or wand assembly without running back and forth to your engine to shut it down and release the pressure in the hose. When you maneuver about cleaning with a wand, it also helps to relieve fatigue..
  • 3/8” QUICK CONNECT - This is a professional pressure washer shut off ball valve kit that includes a ball valve, a 3/8″ quick coupler plug, a 3/8″ quick coupler socket and teflon tape. The set up comes unassembled but it gets assembled very easily. The ball valve fit is designed in a manner to persist high pressures..
  • PREMIUM MATERIAL ENSURES HIGH QUALITY - The shut-off ball valve is made of premium quality stainless steel, housing with stainless steel handle and insert. Great quality stainless steel brings durability and long rust free service life. It can attain maximum working pressure of 4500 PSI and maximum working temperature of 158 degree Fahrenheit..
  • EASY TO USE - The design pattern of this pressure washer shut-off ball valve is constructed in a way that it can sustain high pressure working and provide good leverage un....
Check Stock

DERNORD 1PC Type Stainless Steel Ball Valve 0.5 NPT Standard Port for Water Oil and Gas

  • Serviceable Stainless Steel Ball Valve - Can be taken apart via threads, Threaded Connector Type Female to Female NPT.
  • Stainless Steel 1PC Ball Valve Handle: Handle with blue vinly insulation.
  • Body & Ball Type:304 Stainless Steel.Temp Range:-60 F to 450 F.
  • Stainless Steel 1PC Ball Valve Nominal Working Pressure:1000 WOG:Max 1000 psi for Water, Oil, Gas,.
  • NOTE: DERNORD 1PC Type Ball Valve Standard Port is not full port type, the size we marked is only the thread size this ball valve fits. If you need....
Check Stock

Maxline M8203V Dual Outlet Kit 1' Inlet Two 1/2' Ports Line Drop With Ball Valve

  • This is a MaxLine M8203V dual outlet port with ball valve..
  • Features a 3/8" FNPT Port w/ Ball Valve (Serves as air pressure / moisture drain).
  • This port has a 1" inlet that only works with 1" MaxLine tubing..
  • It features two 1/2" outlets that come out at an angle to make adding attachments convenient..
  • This outlet block also features an inline ball valve to shut off the flow of air to the outlet as well as a twist moisture drain on the bottom to help avoid get excess water build up in your airlines. Dimensions: 3-7/8" Wide x 4-1/2" Tall x 3-1/4" Deep.
Check Stock

True Union Ball Valve 1-1/2" with Full Port (2-Pack), UPVC Full Flow Ball Valve - U.S. ASTM EPDM O-Rings and Reversible PTFE Seats, Rated at 230 PSI

  • Higher PSI - Sealed with higher quality ASTM EPDM O-Rings and engineering plastic powder. So our ball valve can withstand a higher pressure(230 PSI) than general products(150-200 PSI)..
  • High Cost Performance: Pack of 2 full flow ball valve are highly cost-effective, and this premium ball valve can be used for many years, reduce your post-maintenance costs..
  • Full Port - The best full flow ball valve for your water project. Provide excellent performance in water engineering, pipeline facilities, agricultural irrigation, swimming pool and other commercial pipeline systems..
  • Easy to Operate and Install - The smooth inner sphere makes the handle easy to rotate. Perfect match with PVC pipe 1 1/2 inch Sch40. standard..
  • Perfect Sale After Service - We provide online service at any time. If there is any problem with the product, we can return or exchange the goods unconditionally or refund your full amount..
Check Stock

COOLWHEEL Bicycle Presta and Schrader Valve Adapter - 15 Pcs Bike Brass DV AV SV Tire Valve Inflator Adapters Set,Ball Pump Needle Inflation Devices & Accessories for Bike Tire Air Compressor

  • PREMIUM QUALITY - These valve adapters are made of solid brass & ABS plastic with threads,the rubber ring gasket will not leak easily, which is strong and durable for long term of use..
  • PORTABLE TO CARRY - The valve adapters take up very little space and very convenient to carry. You can place them in any backpack or pockets when riding and will not easy to lose..
  • EASY TO USE - Convenient to install and use, kids can also use the tapered nozzle for inflatable toys and balloon easily.These are ideal daily tool for most family to bike tire valve pumping, sport balls and other inflatable equipment..
  • VALVE ADAPTOR KIT - The 15 Pcs various sizes and specifications of bike inflator pump kit including 6 x DV/SV bike tire valve adapters, 2 x AV valve adapters, 2 x SV valve adapters, 2 x ball pump metal needles, 1 x solid brass tapered inflatable nozzles, 2 x black ABS tapered inflatable nozzles..
  • WIDE APPLICATION - These are suitable for mountain bikes, road bikes and stationary bicycles with Presta valve tubes, also can be used for inflatable toys, swim ring, balloons, sport balls such as basketball, football, volleyball, rugby, yoga ball,etc..
Check Stock

Pop Fidget Toy Popper Ball It 6 PCS, 3D Squeeze Pop Ball It Fidget Toys Food Grade Silicone Sensory Toys Stress Balls for Kids Adults Elderly Over 3 Months

  • 【ATTENTION】We've upgraded the pop fidget balls by adding a valve to the ball so they can be inflated and deflated for better storage. As soon as you open the valve, the ball will automatically fill with air in 3-5 seconds. Once the valve is closed, the ball won't leak air until you open the valve again. The valve design will not affect the pop and squeezing function. We also add keyhole to every ball, and each ball has a chain. You can use the ball as a keychain or use as hanging decoration..
  • 【Easter Basket Stuffers it Pop Party Favors 】The squishy fidget its toy pack kid party favors for kids 8-12 is made of durable safe silicone toddler party favors for kids 3-5 to play. Stress balls party favors adults are not easily deformed. Get this party favor toys fidget party favors for teens boy party favors for kids 8-12 bubble party favors for kids party bag stuffers for kids party toys, pop fidget party favors fidget toy party favors..
  • 【 Easter Gifts Release Stress Girl Party Favors for Kids 4-8 】The 3d push pop ball it girls party favors will make a pop sound party favors for toddlers 1-3, allowing you to stress relief. Surprise your kids with a u....
Check Stock

Motorized Ball Valve- 1/2\ Brass Ball Valve with Full Port, 9-24V AC/DC and 2 Wire Auto Return Setup by U.S. Solid

  • SAFE AND RELIABLE- Made of durable brass, this valve is safe and reliable.
  • The estimated life expectancy of 80,000 to 100,000 cycles means it is built to last.
  • NPT THREADING-½” quality brass thread, manufactured and measured according to National Pipe Thread standards.
  • This electrical ball valve is full port, meaning the bore in the ball is a full1/2”.
  • This minimizes pressure loss through the valve.
  • 9V-24V AC/DC- Works effectively over entire voltage range.
  • Limit switch minimizes power after valve is fully open.
  • Ideal for projects where an automatic return is necessary.
  • 2 WIRE AUTOMATIC RETURN SETUP- Simple two wire connection, valve largely de-energizes after opening.
  • Returns to fully closed if power is removed.
  • ALTERNATIVE TO SOLENOID VALVES- Automatically cuts off power once fully open or fully closed.
  • This reduces likelihood of overheating, making it a great alternative to solenoid valves for projects where a valve needs to be open for an extended period of time.
Check Stock