Top Balustrading Fitting

Cen-Tec Systems 94192 Quick Click 16 Ft. Hose for Home and Shop Vacuums with Multi-Brand Power Tool Adapter for Dust Collection, Silver, Feet

  • ...and external connections for dust collection.
  • The highly flexible commercial grade vacuum hose has a smooth interior to resist clogging with large profile debris while supplying superior airflow. Airflow to the tool can be modified as necessary for suction control using a swivel air relief feature built into bayonet fitting.
  • Comes with quick click system for connecting to the exhaust port on all major brands of hand held and stationary power tools. A collar with clip ring, a bayonet fitting with a 1" soft TPE fitting, and a second bayonet with a soft 1. 50" TPE fitting are designed to accept and hold exhaust ports designed to fit the hose internally or externally as demanded by the power tools design. Changing from one end fitting to the other takes a few seconds and offers a smooth 360 degree swivel connection to prevent the hose from kinking or restricting movement of the power tool.
  • The soft molded TPE fitting measures 1. 00" on the inner diameter and has four concentric rings to hold firmly to the power tool. For power tools with a female connection the 1. 00" soft TPE part measures 1. 40" on the outer diameter. The soft rubber like feel and taper of the fitting insures a positive tool forming fit.
  • Includes a second bayonet with a soft molded TPE fit....
Check Stock

Tool Daily Short Pressure Washer Gun with Foam Cannon, 1/4 Inch Quick Connector, with 5 Pressure Washer Nozzle Tips, 1 Liter

  • ATTENTION: Not Fit GardenHose, WaterHose or YourFaucet Directly". Max pressure is up to 4000 PSI. Max flow rate is 8 GPM. Max Temperature of water is rated to 60℃ / 140 F. Pressure washer guns have M22 fitting, compatible with M22 14mm and M22 15mm fitting. M22 14mm fitting is compatible with Generac, Simpson, Briggs Stratton, craftsman, karcher, Ryobi pressure washer. M22 15mm fitting is compatible with Sun Joe, Campbell, MI-T-M, AR Blue, Stanley, Cleanforce, Simoniz, Excell power washer..
  • If hose has M22 14mm fitting with 14mm inside diameter, please connect the gun to hose directly. If hose has M22 15mm fitting with 15mm inside diameter, please connect the brass coupler to gun and hose..
  • Adjustable Snow Foam Lance with 1/4" quick disconnection fitting. Container Capacity: 1 Liter / 0.22 Gallon. Specification: 1000 PSI to 3000 PSI. Adjustable nozzle for accurate mixing and foam generation. Turn the top knob right (-) to get the thickest mixture, adjust the nozzle to get a proper sprinkle pattern, and let it loose..
  • 5 Nozzle Tips have different angle (0, 15, 25, 40, 65 degree). Choose different nozzle according to the actual need. Such as watering flowers and plants, washing car. They also can be attached to a Quick-Connect Wand for swifter appl....
Check Stock

Class A Customs | One (1) RV Fresh and Gray Water 30 Gallon Tank | T-3000

  • 30 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
  • WATER TANK MEASUREMENTS: 34.5” Longest Length (not including fittings) x 12” x 17.5” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads.: (TWO) 1.5" Balloon Style Threaded Female NPT Standard - fitting will be closed, to use remove inner membrane with razor knife (TWO) .5" Threaded Female NPT Standard - open fitting, unsealed.
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
Check Stock

304 Stainless Steel Compression Tube Fitting Double Ferrule Joint Connector Equal Straight Adapter(Φ1/2-Φ1/2)

  • STAINLESS STEEL: The 304 stainless steel compression tube fitting double ferrule construction for durability and resistance to corrosion..
  • SCOPE OF APPLICATION: The stainless steel compression tube fitting double ferrule has dual couplings for joining two tubes of the same diameter..
  • LESS LEAKAGE: This stainless steel compression tube fitting has a double ferrule construction, reducing the possibility of leakage..
  • SIMPLE OPERATION: Back ferrules hold tubing tight within the body of the fitting while front ferrules hold tubing tight through the nut..
  • APPLICABLE MEDIUM: This stainless steel compression tube fitting double ferrule is applied to oil, water, gas and other non-corrosive or corrosive medium..
Check Stock

Toolazy Ebb & Flow Fitting Kit，Ebb and Flow Fitting Complete Kit Combo Set with 2 Extensions

  • HIGH QUALITY PLASTIC ： Each kit is made from 100% black virgin plastic and is BPA free。.
  • TIDAL IRRIGATION SYSTEM ： Can be used for hydroponics, Tidal irrigation, Aeroponic, aquaponics, flood and drain and drip irrigation systems。.
  • PACKAG KIT ： Ebb & Flow Kit Fill & Drain Fitting comes sealed in a bag，1/2" Tub outlet fitting(1 piece), 3/4" Tub outlet fitting(1 piece), Screen fitting(2 piece) and outlet extension fitting(3 piece)。.
  • EXCELLENT QUALITY ： Filling/draining kits made with the highest quality materials and craftsmanship, strict quality control to ensure tight fit。.
  • INCREASED VERSATILITY ： Thread PVC pipe fittings into bulkhead fittings，Used in homemade tidal irrigation systems。.
Check Stock

iCrimp CRQ01 Disconnect Tong Sized 1/2 inch, 3/4 inch, 1 inch, Removal Tool used for Demount Brass Push Fit, Push-to-Connect Fittings

  • CRQ01 Push-Fit fitting disconnect tool has 3 teeth available in 1/2 in., 3/4 in. and 1 in. sizes, allows for easy removal of brass push-to-connect fitting from pipe.
  • CRQ01 disconnect tong is the easiest way to disconnect brass Push to Connect fittings in hard to reach places where it can be tough to get leverage on the release collar.
  • Compact design with wide grip handles. One-handed operation. Quick and easy disassembly.
  • To use the disconnect tong, slide the tong over the fitting and the pipe. Squeeze the tong to press the fittings collar and pull the pipe from the fitting. Easier to use in tight situations.
  • The disconnect tool depresses the release collar using the force applied by your hand to allow the teeth of the fitting to release and the fitting to be removed, reducing the risk of installation errors.
Check Stock

Whirl-Pack Write-On Whirl-Pak Collection Bags - Box of 100 - C32520N

  • Capacity: 1 Liter - Size: 7'' x 9'' - Material: 2 mil Tedlar PVF film - MADE IN USA.
  • Our Tedlar bags utilize a patent pending 2-in-1 fitting. By combining a shut-off valve and Teflon-lined septum, you are able to fill the bag and remove the sample for analysis with one fitting. The stem is used to connect 1/8” ID tubing for filling and emptying the bag. The septum can be used for removing the sample using a syringe. Fittings are available in polypropylene, stainless steel, and Teflon..
  • Guidelines: 1. Store Tedlar bags in a clean area away from potential contamination sources. 2. Tedlar bags are designed for use at atmospheric pressure. Over pressurization (003e2 psi) can cause the bags to burst. 3. Always ensure the bag, fitting, and tubing materials are appropriate for the compounds being sampled. 4. CEL Scientific does not recommend reusing Tedlar bags in most cases..
  • To fill the bag: 1. Connect the appropriate tubing (1/8” ID) from a sampling source to the stem on the side of the fitting. 2. Open the valve by holding the stem and turning the top portion of the fitting counterclockwise one turn. 3. When the bag is full (approx. 90% capacity), close the valve by holding the stem and turning the top portion of the fitting clockwise until it is finge....
Check Stock

NEW WILWOOD GO KART BRAKE SET WITH CALIPER PADS MASTER CYLINDER & LINE KIT FOR 1/8 ROTORS GREAT FOR KARTING JR DRAGSTER ETC SOUTHWEST SPEED

  • Wilwood Karting Kit with Brake Caliper & Pads, Master Cylinder, 5' of Nylon Line, & 90 Degree Fitting to use with Caliper if necessary. (Wilwood Part #120-5498, #260-5520, #928-503, & #928-560)..
  • Wilwood Karting Kit with Brake Caliper & Pads, Master Cylinder, 5' of Nylon Line, & 90 Degree Fitting to use with Caliper if necessary. (Wilwood Part #120-5498, #260-5520, #928-503, & #928-560). Kit Includes: Wilwood Go-Kart Caliper for .125" Rotors Fits 0.125" Thick rotors Features Two 1.00" Pistons Weighs only 1.2 lbs. Comes with high friction brake pads..
  • Wilwood Go-Kart Master Cylinder with a 1/2" Bore 1/2" Bore Weighs only .55 lbs. This super lightweight aluminum master cylinder designed specifically for kart & jr. dragster racing applications incorporates an adjustable lever ratio with a remote mount clear fluid reservoir for easy monitoring The assembly comes ready to install and includes billet bracket, lock-wired drilled hardware, & fluid line fitting ..
  • 5 Feet of -3 Nylon Brake Line 3/16" Nylon tubing 5' Should equip most karts with some left-over..
  • 90 Degree Fitting for Caliper Depending on how everything is mounted, the line might run to the caliper at a bad angle for the straight fitting. This 90 degree fitting instal....
Check Stock

Hayward SP1023 1-1/2-Inch FIP Inlet Return Fitting with Locknut and Gasket

  • Inlet return fitting comes with gasket and locknut.
  • It is designed to fit on-ground and above ground swimming pools.
  • Gaskets and a fitting nut allow it be attached and sealed thru the pool wall and vinyl liner.
  • Front has 1-1/2-inch female threads for use with the eyeball fitting.
  • Back has 1-1/2-inch female threads for use with a hose fitting.
Check Stock

Smart Vac SMP500 Central Vacuum System Power Unit

  • Includes everything you need to prepare your home for a central vacuum system with 3 valves -Works with ANY brand of central vacuum you decide to install..
  • 1.) PVC Cement.......................................(QTY - 1) | 2.) Low Voltage Inlet Valve.....................(QTY - 3) | 3.) Mounting Plate(s)..............................(QTY - 3) | 4.) Couplings..........................................(QTY - 6).
  • 5.)Sweep 90 Fitting...............................(QTY - 9) | 6.) Short 90 Fitting..................................(QTY - 3) | 7.) 45 Degree Elbow...............................(QTY - 6) | 8.) Sweep Tee Fitting..............................(QTY - 2).
  • 9.) Pipe Straps Fitting.............................(QTY - 6) | 10.) Low Voltage Wire.............................(QTY - 45') | 11.) PVC Pipe 2 Inch OD/5' Lengths.- Actual each pipe length is 59 1/8 ".....(QTY - 45').
Check Stock

Central Vacuum Cleaner with Deluxe Accessory KIT-Set

  • Includes everything you need to prepare your home for a central vacuum system with 3 valves -Works with ANY brand of central vacuum you decide to install..
  • 1.) PVC Cement.......................................(QTY - 1) | 2.) Low Voltage Inlet Valve.....................(QTY - 3) | 3.) Mounting Plate(s)..............................(QTY - 3) | 4.) Couplings..........................................(QTY - 6).
  • 5.)Sweep 90 Fitting...............................(QTY - 9) | 6.) Short 90 Fitting..................................(QTY - 3) | 7.) 45 Degree Elbow...............................(QTY - 6) | 8.) Sweep Tee Fitting..............................(QTY - 2).
  • 9.) Pipe Straps Fitting.............................(QTY - 6) | 10.) Low Voltage Wire.............................(QTY - 45') | 11.) PVC Pipe 2 Inch OD/5' Lengths.- Actual each pipe length is 59 1/8 ".....(QTY - 45').
Check Stock

4 Pack PVC Bulkhead for Rain Barrels 3/4" Male 1/2" Female, Winspeed Double Threaded Bulkhead Water Tank Connector with Thick Silicone Seal Water Tank PVC Connector Adapter for Pools, Aquariums, Tub

  • 【Durable 3/4" Male 1/2" Female Bulkhead Fitting】Our bulkhead fitting is made of high-quality PVC, equipped with 2 rubber rings for better sealing, which is colorfast, has no crack, and no peel as well as lasts longer than ordinary plastic fittings..
  • 【Efficient Water Tank Connector Fitting】The bulkhead fitting adapter is made of high-quality PVC, which is colorfast and durable. Bulkhead fitting comes with a silicone seal gasket for better sealing performance. Keep your bucket with fresh rainwater season after season and can also drain the bottom of the tank impurities..
  • 【What You Get】4 pcs 3/4" male 1/2" female bulkhead fitting and 8 pcs thick silicone seal gaskets. It can be very convenient for your daily life. You can share these good tools with your family and friends.（Please confirm the size before ordering！）.
  • 【Easy Installation】The compression bulkhead fittings are super easy to operate and quick to install, first drilling 25-26mm holes in the tank for installation, and assembling the bulkhead and hose adapter. It is suitable for household, commercial and industrial use..
Check Stock